If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
52.16 & tv-out
I can't enable 720x576 @ 50Hz mode for tv-out with these new drivers.
Whole 720x576 resolution seems to be missing from tv-out. With older drivers I could just use RivaTuner to add that specific resolution for tv-out but with these new drivers that workaround doesn't seem to work. 52.16 drivers include internal 'Change Resolutions' but add custom resolution is only available for monitor not for tv-out. 50Hz for tv-out seems also be missing, all I can select is 60Hz for every tv-out mode. GF4 4200 with Conexant CX25873 --- Janne |
#2
|
|||
|
|||
Try to override the refresh rates. Assuming you have Windows XP, right click
the desktop and click properties, then the SETTINGS tab, then advanced. Go into the TAB for your specific card. There should be a GF 4 TI 4200 TAB. Click override refresh rates. If you still do not see the resolution then find the box that says Hide Modes that this monitor cannot support and untick this box. regards B "tourettes" wrote in message ... I can't enable 720x576 @ 50Hz mode for tv-out with these new drivers. Whole 720x576 resolution seems to be missing from tv-out. With older drivers I could just use RivaTuner to add that specific resolution for tv-out but with these new drivers that workaround doesn't seem to work. 52.16 drivers include internal 'Change Resolutions' but add custom resolution is only available for monitor not for tv-out. 50Hz for tv-out seems also be missing, all I can select is 60Hz for every tv-out mode. GF4 4200 with Conexant CX25873 --- Janne |
#3
|
|||
|
|||
B wrote:
Try to override the refresh rates. Assuming you have Windows XP, right click the desktop and click properties, then the SETTINGS tab, then advanced. Go into the TAB for your specific card. There should be a GF 4 TI 4200 TAB. Click override refresh rates. If you still do not see the resolution then find the box that says Hide Modes that this monitor cannot support and untick this box. 720x576 resolution is found from monitor and tv override refresh rates tabs. 720x576 resolution can be used on monitor but not on tv-out. Also 60Hz is only refresh rate that is available for all tv-out modes. PAL movies needs 50Hz. --- Janne |
#4
|
|||
|
|||
tourettes wrote:
B wrote: Try to override the refresh rates. Assuming you have Windows XP, right click the desktop and click properties, then the SETTINGS tab, then advanced. Go into the TAB for your specific card. There should be a GF 4 TI 4200 TAB. Click override refresh rates. If you still do not see the resolution then find the box that says Hide Modes that this monitor cannot support and untick this box. 720x576 resolution is found from monitor and tv override refresh rates tabs. 720x576 resolution can be used on monitor but not on tv-out. Tried 52.16 drives in clean Windows XP isntallation. Now 720x576 resolution is available for tv-out. It seems that removing older 45.33 drivers from control panel and using Driver Cleaner 2.0 wasn't enough. Also 60Hz is only refresh rate that is available for all tv-out modes. PAL movies needs 50Hz. So, does anyone have ideas how 52.16 drivers would allow 50Hz? |
#5
|
|||
|
|||
....snip....
Tried 52.16 drives in clean Windows XP isntallation. Now 720x576 resolution is available for tv-out. It seems that removing older 45.33 drivers from control panel and using Driver Cleaner 2.0 wasn't enough. So, does anyone have ideas how 52.16 drivers would allow 50Hz? I have the exact same problem. See http://groups.google.dk/groups?q=tvo...lia.net&rnum=2 TVout @ 50 hz is impossible in the newer drivers. Best regards Michael |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
nVidia to release WHQL 52.16 next week... | Too_Much_Coffee ® | Nvidia Videocards | 13 | November 5th 03 01:33 PM |
52.16 question | Chris Murfitt | Nvidia Videocards | 5 | November 1st 03 02:35 AM |
GF3 Ti200 & 52.16 Drivers | Turd Ferguson | Nvidia Videocards | 3 | October 25th 03 04:48 PM |
52.16 Settings Question | Joe727 | Nvidia Videocards | 1 | October 24th 03 05:09 PM |
Updated to 52.16 - Better overclock | Daniel Roberts | Nvidia Videocards | 0 | October 23rd 03 08:32 PM |