Ping Paul

Hi paul this was your last post with my issue in the other thread.is it
possible for you to send me the all in one file so I can put it on the
floppy and do as you suggested?I have tried but am unable to get the files
to be on the floppy..
my email to send it to would be
tia
req


When I used the Shuttle tool, I get four files on the floppy.
Two are invisible.

AUTOEXEC.BAT - contents are text lines "@echo off" and "cls"
COMMAND.COM - 68KB
IBMBIO.COM - invisible 28KB
IBMDOS.COM - invisible 32KB

I would think you could put your own AUTOEXEC.BAT on
there if you want.

In article , "reqluq"
wrote:


Hi paul this was your last post with my issue in the other thread.is it
possible for you to send me the all in one file so I can put it on the
floppy and do as you suggested?I have tried but am unable to get the files
to be on the floppy..
my email to send it to would be
tia
req


When I used the Shuttle tool, I get four files on the floppy.
Two are invisible.

AUTOEXEC.BAT - contents are text lines "@echo off" and "cls"
COMMAND.COM - 68KB
IBMBIO.COM - invisible 28KB
IBMDOS.COM - invisible 32KB

I would think you could put your own AUTOEXEC.BAT on
there if you want.

Can you view the contents of the floppy disk in Windows ?
You need to edit the autoexec.bat, add the command to flash
the BIOS, copy aflash.exe, a bios file like AS331006.AWD
you downloaded, and then the floppy should be ready to
boot the system.

http://www3.telus.net/agentsmith/articles/article1.html

AFLASH.EXE /AUTO AS331006.AWD

What all in one file are you referring to ?

Paul

"Paul" wrote in message
...

In article , "reqluq"
wrote:


Hi paul this was your last post with my issue in the other thread.is it
possible for you to send me the all in one file so I can put it on the
floppy and do as you suggested?I have tried but am unable to get the
files
to be on the floppy..
my email to send it to would be
tia
req


When I used the Shuttle tool, I get four files on the floppy.
Two are invisible.

AUTOEXEC.BAT - contents are text lines "@echo off" and "cls"
COMMAND.COM - 68KB
IBMBIO.COM - invisible 28KB
IBMDOS.COM - invisible 32KB

I would think you could put your own AUTOEXEC.BAT on
there if you want.

Can you view the contents of the floppy disk in Windows ?
You need to edit the autoexec.bat, add the command to flash
the BIOS, copy aflash.exe, a bios file like AS331006.AWD
you downloaded, and then the floppy should be ready to
boot the system.

http://www3.telus.net/agentsmith/articles/article1.html

AFLASH.EXE /AUTO AS331006.AWD

What all in one file are you referring to ?

Paul
I mean the procedure you are explaining to me to do,I've tried putting all
on the floppy to no avail,I was hoping you could load it all in a folder and
mail it to me and I paste it onto a floppy..I'll give it a try again
thanks