If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
P4P800VM issue with Fedora Core 2 Linux
I have a Colomachine CM54 SATA based 1U Server. Here is the hardware
specification: http://www.colomachine.com/cm-54.htm Motherboard: Integrated ASUS P4P800VM micro-atx Processor: Intel® Pentium 4® 3.06GHz Processor (Hype-thread Enabled) Chipset: Intel® 82865G GMCH / Intel® 82801DB ICH5 System Memory: 2 x 184 pins DDR266 DIMM sockets with a maximum of 4GB installed memory. (1GB DDR333 Installed) IDE/EIDE Interface Network Support: Intel 82562EZ LAN PHY 10/100Mbps Fast Ethernet Port (RJ45) BIOS:Award BIOS Video Support:Integrated 865G Chipset with onboard video. AGP 8X Hard Disk Drive: 2 x (Samsung or Seagate) 120GB SATA HD CD-ROM Drive: BTC 52X CDROM Reader (IDE) Power Supply:ATX 250 watts power supply (Dual 110V/220V Auto-switch) I am trying to load Fedora Core 2 on the machine and it will boot then whether I select graphical or text mode to perform the install; it starts to load then stalls when it gets to /sbin/loader It just sits there. a CR does nothing. what's wrong? what do I do? Is it a hardware problem or O.S. related issue? Thanks! |
#2
|
|||
|
|||
RCman wrote:
I have a Colomachine CM54 SATA based 1U Server. Here is the hardware specification: http://www.colomachine.com/cm-54.htm Motherboard: Integrated ASUS P4P800VM micro-atx Processor: Intel® Pentium 4® 3.06GHz Processor (Hype-thread Enabled) Chipset: Intel® 82865G GMCH / Intel® 82801DB ICH5 System Memory: 2 x 184 pins DDR266 DIMM sockets with a maximum of 4GB installed memory. (1GB DDR333 Installed) IDE/EIDE Interface Network Support: Intel 82562EZ LAN PHY 10/100Mbps Fast Ethernet Port (RJ45) BIOS:Award BIOS Video Support:Integrated 865G Chipset with onboard video. AGP 8X Hard Disk Drive: 2 x (Samsung or Seagate) 120GB SATA HD CD-ROM Drive: BTC 52X CDROM Reader (IDE) Power Supply:ATX 250 watts power supply (Dual 110V/220V Auto-switch) I am trying to load Fedora Core 2 on the machine and it will boot then whether I select graphical or text mode to perform the install; it starts to load then stalls when it gets to /sbin/loader It just sits there. a CR does nothing. what's wrong? what do I do? Is it a hardware problem or O.S. related issue? Thanks! I had the same problem with my P4P800 Deluxe until i checked out http://www.fedorafaq.org/ for a fixed iso... HTH NBK |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sound in linux? ASUS P5AD2, Fedora Core III | Benjamin Johnson | Homebuilt PC's | 6 | February 7th 05 10:23 PM |
AMD SEMPRON CPU | patrick | Homebuilt PC's | 0 | July 29th 04 12:59 PM |
Best drive configuration? | Noozer | General | 20 | May 27th 04 03:10 AM |
Fedora Core 2 install dies | NBK | Asus Motherboards | 6 | May 24th 04 03:07 AM |
Lindows? OS's in general... | Brandon | Homebuilt PC's | 6 | February 14th 04 09:23 PM |