A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General Hardware
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

memory problem



 
 
Thread Tools Display Modes
  #1  
Old July 9th 03, 05:29 PM
yarhuborn
external usenet poster
 
Posts: n/a
Default memory problem

i have gigabyte 7zxrc2 motherboard and first i bought 512MB,name
samsung SD133. last few weeks ago i bought another 512MB with no brand
name(pc 133,cl2).and than they stop working together.but they work
well if i use separate. so i claim to the shop and they said cause of
chip set. so i bought another 512MB which is CL3 and PC133.after that
i put alltogether and they work well.but in cmos, i change the CL tab
to auto. if i change the CL tab to 2 or 3, they start restart again
and again.and start form then my winxp pro start restart when i
shutdown my pc. i already update my bios and i think i did all
necessary things. i think, i miss something. somebody help me.
  #2  
Old July 10th 03, 05:26 AM
Gareth Church
external usenet poster
 
Posts: n/a
Default

"yarhuborn" wrote in message
om...
i have gigabyte 7zxrc2 motherboard and first i bought 512MB,name
samsung SD133. last few weeks ago i bought another 512MB with no brand
name(pc 133,cl2).and than they stop working together.but they work
well if i use separate. so i claim to the shop and they said cause of
chip set. so i bought another 512MB which is CL3 and PC133.after that
i put alltogether and they work well.but in cmos, i change the CL tab
to auto. if i change the CL tab to 2 or 3, they start restart again
and again.and start form then my winxp pro start restart when i
shutdown my pc. i already update my bios and i think i did all
necessary things. i think, i miss something. somebody help me.


Sounds like you've been playing around with the BIOS settings too much. A
lot of people make a big deal out of CL2 vs CL3, the reality is it means
nothing (unless you are overclocking to buggery).

You seem to be saying that the chips work fine with the CL set to auto. Why
not leave it like that? If not, I would reset the BIOS to default settings
and stop playing around with it.

Gareth


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
problem adding memory Compaq Deskpro EN patfada Homebuilt PC's 1 February 8th 05 10:56 AM
fsb speed - why does it matter? James Hanley Overclocking 52 November 7th 04 01:04 PM
A7N8X 2.0 Memory Problem... Ambelamba Asus Motherboards 0 August 23rd 04 04:53 AM
Memory Problem: Dimension L933R Terry Dell Computers 3 May 17th 04 02:09 PM
7DXR memory problem GrgArt Overclocking AMD Processors 0 September 30th 03 01:16 AM


All times are GMT +1. The time now is 09:21 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.