If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Epson C84 problem
Following a poor printing results
I ran Nozzle Check. The pattern was solid (good!) on: Black, Magenta & yellow. Very broken (mostly a few ink dots) on Cyan. Having plenty ( 50% ) of ink.. I ran head cleaning. And again. Tried to print. "Well Square one" Just for "good measure" replaced the Cyan with a new one. Repeat. repeat. Results: Same, same Please adise, Thanks Uzi Barzilai |
#2
|
|||
|
|||
You would have to do more than one clean cycle, I do them on the rare
occasion they are needed in pairs, then a third and leave the printer for a couple of hours then another nozzle test. If still bad you could try a purge print of the offending colour there are many examples on the internet if that fails purchase cleaning carts for your c84. "Uzi Barzilai" wrote in message ... Following a poor printing results I ran Nozzle Check. The pattern was solid (good!) on: Black, Magenta & yellow. Very broken (mostly a few ink dots) on Cyan. Having plenty ( 50% ) of ink.. I ran head cleaning. And again. Tried to print. "Well Square one" Just for "good measure" replaced the Cyan with a new one. Repeat. repeat. Results: Same, same Please adise, Thanks Uzi Barzilai |
#3
|
|||
|
|||
Contact me at:
e-printerhelp(at)mvps(dot)org (at)=@ (dot)=. and I will provide you with a free copy of my Epson cleaning guide which explains how to resolve this problem with your C84. Art Uzi Barzilai wrote: Following a poor printing results I ran Nozzle Check. The pattern was solid (good!) on: Black, Magenta & yellow. Very broken (mostly a few ink dots) on Cyan. Having plenty ( 50% ) of ink.. I ran head cleaning. And again. Tried to print. "Well Square one" Just for "good measure" replaced the Cyan with a new one. Repeat. repeat. Results: Same, same Please adise, Thanks Uzi Barzilai |
#4
|
|||
|
|||
In message 4ktLe.209312$5V4.127393@pd7tw3no, Arthur Entlich
writes Contact me at: e-printerhelp(at)mvps(dot)org (at)=@ (dot)=. and I will provide you with a free copy of my Epson cleaning guide which explains how to resolve this problem with your C84. I know people seem quite keen on your guide there, I was wondering, is there any reason why you don't shove it on a web/ftp site somewhere for people to download at will, rather than people asking you to email it however many times a week? -- Timothy |
#5
|
|||
|
|||
|
#6
|
|||
|
|||
In message AFFMe.231911$s54.105618@pd7tw2no, Arthur Entlich
writes Yes, there is. Lol, what a response! Is there some sort of copyright issue or something then? wrote: In message 4ktLe.209312$5V4.127393@pd7tw3no, Arthur Entlich writes Contact me at: e-printerhelp(at)mvps(dot)org (at)=@ (dot)=. and I will provide you with a free copy of my Epson cleaning guide which explains how to resolve this problem with your C84. I know people seem quite keen on your guide there, I was wondering, is there any reason why you don't shove it on a web/ftp site somewhere for people to download at will, rather than people asking you to email it however many times a week? -- Timothy |
#7
|
|||
|
|||
|
#8
|
|||
|
|||
My Epson clogged on the 2nd day, the replacement clogged on the 4th
day all with Epson inks. I went for a Canon ip5000 had it about three months it not clogged nor wanted any head print test yet, mind you I'm using Canon ink. One thing no one has told you is not to apply more than about 6 continuous head cleans. Epson tech told me this will damage the heads, no mention of it in the manual is there? Davy |
#10
|
|||
|
|||
It won't damage the heads, but it will damage your wallet and just
wastes a lot of ink and uses up the waste ink counter numbers/waste ink pads. Art Davy wrote: My Epson clogged on the 2nd day, the replacement clogged on the 4th day all with Epson inks. I went for a Canon ip5000 had it about three months it not clogged nor wanted any head print test yet, mind you I'm using Canon ink. One thing no one has told you is not to apply more than about 6 continuous head cleans. Epson tech told me this will damage the heads, no mention of it in the manual is there? Davy |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Epson R300 problem | Bill Evans | Printers | 6 | July 20th 05 12:13 AM |
Escndv.exe has encountered a problem and needs to close | asd;flkj | Printers | 2 | March 10th 05 03:56 PM |
Epson Stylus C62 and Sublimation ink problem! | George | Printers | 15 | March 5th 05 11:59 AM |
Epson SC 980 driver problem | Grumpy Old Man | Printers | 3 | February 15th 05 11:42 AM |
Epson R200 Print CD problem | Corepaul | Printers | 2 | June 13th 04 02:54 AM |