If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
follow up to a7n8x-vm won't boot up
"Me" wrote in message
ink.net... I put the board and processor in a new case and power supply and the same thing happens. The fan starts for two second and cuts out. The processor is definitely mounted correctly. I can't find any jumper in the pc that would prevent it from booting up. I've never heard of a chassis intrusion detector, but I don't believe I have one. It's at the default setting All the other jumpers appear to be sound jumpers, USB, nothing that would cut the power out. Besides buying a new board and processor and plugging equipment in and out, any ideas ? Sounds like the thermal protection is kicking in... did you use a stock heatsink and fan? or..... |
#2
|
|||
|
|||
yes!
"Ed" wrote in message ... On Sat, 02 Aug 2003 22:35:40 GMT, "Me" wrote: I put the board and processor in a new case and power supply and the same thing happens. The fan starts for two second and cuts out. The processor is definitely mounted correctly. I can't find any jumper in the pc that would prevent it from booting up. I've never heard of a chassis intrusion detector, but I don't believe I have one. It's at the default setting All the other jumpers appear to be sound jumpers, USB, nothing that would cut the power out. Besides buying a new board and processor and plugging equipment in and out, any ideas ? CPU fan plugged into CPU FAN header on mobo? |
#3
|
|||
|
|||
I used the one that was mail ordered to me along along with the
motherboard. They've always sent me good ones. is it tight on the processor, try to twist it using little/no force and just make sure that it's on tight.. did you use thermal grease? did you remove any clear/plastic cover that's on the heatsink? |
#4
|
|||
|
|||
On Sun, 3 Aug 2003 19:03:55 +0100, "rstlne" wrote:
I used the one that was mail ordered to me along along with the motherboard. They've always sent me good ones. is it tight on the processor, try to twist it using little/no force and just make sure that it's on tight.. did you use thermal grease? did you remove any clear/plastic cover that's on the heatsink? and is the CPU heat sink seated properly? There is a notch on the socket and heatsink, see here if not sure.... http://tinyurl.com/3ue5 Ed |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AIW 9700 pro and ASUS A7n8x deluxe Video problem on boot | Aaron | Asus Motherboards | 3 | August 2nd 03 05:51 PM |
A7N8X Deluxe Won't Boot from Hard Drives | Dennis | Asus Motherboards | 5 | July 29th 03 07:19 PM |
A7N8X Deluxe and WinXP Pro boot problem | Scott | Asus Motherboards | 4 | July 28th 03 11:13 PM |
A7N8X Maxtor SATA drive no boot | Phut | Asus Motherboards | 1 | July 23rd 03 10:58 PM |
A7N8X Dx SATA-only boot... | Phut | Asus Motherboards | 2 | July 22nd 03 09:27 PM |