If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
FX 5200 PCI Texture Corruption
Hi,
I've installed a FX5200 PCI card in an older Dell Poweredge server (1400?). The card installed fine in one the larger slots (i'm guessing it's a shared pci/isa) but will not succesfully boot windows in either of the normal sized pci slots. The problem I'm getting is corrupted textures in most 3D games, such as command and conquer generals. Flashing black areas/lines appear. I've tried different sets of drivers but with no luck. I'm thinking it may be due to the onboard graphics card (an old ATI 2D 4mb card). As far as I can make out there's no way to disable it in the BIOS or via a jumper. Could this be causing the problem? Many thanks, J |
#2
|
|||
|
|||
Yeah its possible that it is, look in your device manager in windows
if you can get there. Or if your bios has a setting for "Init display first" choose PCI or whatever the slot is. Hopefully that helps a bit. ============== Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Texture corruption using GF2 MX400 in 2x and w/VIA chipset! :-O | Dan_Aykroyd | Nvidia Videocards | 8 | August 4th 04 11:05 PM |
my new mobo o/c's great | rockerrock | Overclocking AMD Processors | 9 | June 30th 04 08:17 PM |
Texture Problems! | Gaffer | Nvidia Videocards | 13 | May 1st 04 06:51 PM |
Sata and Data Corruption | Robert Neville | General | 7 | April 25th 04 11:02 AM |
Sata and Data Corruption | Robert Neville | Homebuilt PC's | 7 | April 25th 04 11:02 AM |