If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Transpoting an array
I have a Smart Array 3200 running RAID 5 with RHEL. I need to move it
to a different data center. is there a proper way of disconnecting the system before powering down? The steps i plan are unmount the array pull the power cord in the back of the array pull the array cable from the server so it turns off ( have not seen a power off switch on it) move it put array cable back plug power back so it powers on mount the array. any visible problems with my steps? thnak is advance for any help sk |
#2
|
|||
|
|||
Transpoting an array
What is the server? is your Raid5 array all internal to the server? Are you
moving the server also? - LC "Shiraz" wrote in message ups.com... I have a Smart Array 3200 running RAID 5 with RHEL. I need to move it to a different data center. is there a proper way of disconnecting the system before powering down? The steps i plan are unmount the array pull the power cord in the back of the array pull the array cable from the server so it turns off ( have not seen a power off switch on it) move it put array cable back plug power back so it powers on mount the array. any visible problems with my steps? thnak is advance for any help sk |
#3
|
|||
|
|||
Transpoting an array
The RAID is on a Smart Array and connected externally to a HP DL380. I
want to move both the equipments. Nut Cracker wrote: What is the server? is your Raid5 array all internal to the server? Are you moving the server also? - LC "Shiraz" wrote in message ups.com... I have a Smart Array 3200 running RAID 5 with RHEL. I need to move it to a different data center. is there a proper way of disconnecting the system before powering down? The steps i plan are unmount the array pull the power cord in the back of the array pull the array cable from the server so it turns off ( have not seen a power off switch on it) move it put array cable back plug power back so it powers on mount the array. any visible problems with my steps? thnak is advance for any help sk |
#4
|
|||
|
|||
Transpoting an array
shutdown and power off the server.
power off the disk subsystem remove the cables pack well and ship to the new location stage the server and disk subsystem get it all cabled up power on the disk subsystem power on the server - LC "Shiraz" wrote in message oups.com... The RAID is on a Smart Array and connected externally to a HP DL380. I want to move both the equipments. Nut Cracker wrote: What is the server? is your Raid5 array all internal to the server? Are you moving the server also? - LC "Shiraz" wrote in message ups.com... I have a Smart Array 3200 running RAID 5 with RHEL. I need to move it to a different data center. is there a proper way of disconnecting the system before powering down? The steps i plan are unmount the array pull the power cord in the back of the array pull the array cable from the server so it turns off ( have not seen a power off switch on it) move it put array cable back plug power back so it powers on mount the array. any visible problems with my steps? thnak is advance for any help sk |
#5
|
|||
|
|||
Transpoting an array
"NuTCrAcKeR" wrote shutdown and power off the server. power off the disk subsystem remove the cables pack well and ship to the new location stage the server and disk subsystem get it all cabled up power on the disk subsystem power on the server It is safe to assume that anything that can go wrong will go wrong, so think about how your are going to cope with hardware failure, disaster recovery, etc. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How I built a 2.8TB RAID storage array | Yeechang Lee | Storage & Hardrives | 42 | March 3rd 05 12:04 AM |
Compaq Smart Array 532 Controller - Raid 1 Query | Richard Denny | Compaq Servers | 3 | November 24th 04 12:15 AM |
external raid5 array reporting bad blocks | Nils Juergens | Storage & Hardrives | 0 | October 1st 04 09:07 AM |
external raid5 array reporting bad blocks | Nils Juergens | Storage (alternative) | 0 | September 30th 04 10:32 AM |
RAID Array "Off Line" on P4C800-E Deluxe | macleme | Asus Motherboards | 4 | September 1st 04 07:22 PM |