If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Help! Drive Image Program for SIL 3112 Controllers?
After using Acronis True Image to make a successful image of my c: drive,
which is made up of two SATA Raptor drives on a SIL Raid 0 (Gigabyte 8INXP), I find this program cannot restore the image. If I try it in XP, it can't get around the services; if I try it outside of XP, it sees only the separate disks and not the RAID drive. Folks at Acronis say they have support for some RAID controllers but apparently not the SIL 3112. Anyone out there know of a drive imaging program that will support the SATA Raid controller on these Gigabyte boards? Ghost? True Image? Thanks! Helen |
#2
|
|||
|
|||
Hello Helen
I do not use this combination but did have an issue with the various imaging packages such as Ghost 2003, Drive Image 2002 & Acronis not recognising my RAID and SATA drives correctly. I now use Powerquest Drive Image version 7 which not only images directly within XP but the recovery console aka DOS type interface if you cannot boot your system also sees all of my RAID & SATA devices as well as my external USB2 drives and Firewire (IEEE1394) DVD burner. When you first run the recovery console it is very much like installing XP and it asks you to press F6 to install RAID or other mass storage device drivers. This is a great program as I do not need to reboot into DOS to do images etc and I also have it scheduled to do them regularly so I don't have to do it manually. Hope this helps. Mark "Helen Chevy" wrote in message news:udZ0b.212994$Ho3.27689@sccrnsc03... After using Acronis True Image to make a successful image of my c: drive, which is made up of two SATA Raptor drives on a SIL Raid 0 (Gigabyte 8INXP), I find this program cannot restore the image. If I try it in XP, it can't get around the services; if I try it outside of XP, it sees only the separate disks and not the RAID drive. Folks at Acronis say they have support for some RAID controllers but apparently not the SIL 3112. Anyone out there know of a drive imaging program that will support the SATA Raid controller on these Gigabyte boards? Ghost? True Image? Thanks! Helen |
#3
|
|||
|
|||
Mark:
That was *exactly* the information I was looking for and hoping to get before making the jump to Powerquest. Acronis really left me in a jam since it made a great image of my SATA, which suggested it would restore it. But clearly it does not, and the manufacturer, after taking a week to give me a straight answer, has now admitted this. The F6 option makes all the sense in the work. Thanks again! Helen "Mark Taylor" wrote in message ... Hello Helen I do not use this combination but did have an issue with the various imaging packages such as Ghost 2003, Drive Image 2002 & Acronis not recognising my RAID and SATA drives correctly. I now use Powerquest Drive Image version 7 which not only images directly within XP but the recovery console aka DOS type interface if you cannot boot your system also sees all of my RAID & SATA devices as well as my external USB2 drives and Firewire (IEEE1394) DVD burner. When you first run the recovery console it is very much like installing XP and it asks you to press F6 to install RAID or other mass storage device drivers. This is a great program as I do not need to reboot into DOS to do images etc and I also have it scheduled to do them regularly so I don't have to do it manually. Hope this helps. Mark "Helen Chevy" wrote in message news:udZ0b.212994$Ho3.27689@sccrnsc03... After using Acronis True Image to make a successful image of my c: drive, which is made up of two SATA Raptor drives on a SIL Raid 0 (Gigabyte 8INXP), I find this program cannot restore the image. If I try it in XP, it can't get around the services; if I try it outside of XP, it sees only the separate disks and not the RAID drive. Folks at Acronis say they have support for some RAID controllers but apparently not the SIL 3112. Anyone out there know of a drive imaging program that will support the SATA Raid controller on these Gigabyte boards? Ghost? True Image? Thanks! Helen |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
first build.. problem | Christo | Abit Motherboards | 21 | September 10th 04 02:45 PM |
HELP! MY Computer cannot find hard drive | Michael S. | Asus Motherboards | 8 | June 25th 04 07:13 AM |
Fan Controller and Fan causes floppy drive failure | Andrew Diamond | Overclocking AMD Processors | 16 | September 17th 03 06:56 AM |
Query: Program to reassign Drive letters after removing second harddrive? | V W Wall | General | 0 | August 9th 03 09:05 PM |
Query: Program to reassign Drive letters after removing second hard drive? | Some One | General | 1 | August 9th 03 07:05 PM |