If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
puzzle
I have a real strange situation here. I bought a new case for and old mobo a
soyo SY-K7VIA. When assembled the power does not come on. I get nothing.When I lay the mother board out on a static mat and hook up the power supply with the vid card and the floopy and the HD it boots up no problem!Very strange.Anybody ever heard of this situation. Terry |
#2
|
|||
|
|||
"Terry" wrote in message ... I have a real strange situation here. I bought a new case for and old mobo a soyo SY-K7VIA. When assembled the power does not come on. I get nothing.When I lay the mother board out on a static mat and hook up the power supply with the vid card and the floopy and the HD it boots up no problem!Very strange.Anybody ever heard of this situation. Terry Yes...something is "grounding out" be sure to examime all mounting points and stand offs carefully |
#3
|
|||
|
|||
I have a real strange situation here. I bought a new case for and old mobo a soyo SY-K7VIA. When assembled the power does not come on. I get nothing.When I lay the mother board out on a static mat and hook up the power supply with the vid card and the floopy and the HD it boots up no problem!Very strange.Anybody ever heard of this situation. Terry Not too much strange here. Somewhere you are shorting the motherboard to the new case. Most ot the time if there is a short , especially on the power wires/traces, the computer will not come on. Check very carefully that nothing on the mother board is touching the case that should not be. |
#4
|
|||
|
|||
Thanks I will give that a shot.Appreciate the quick response.
Terry "Philo" wrote in message ... "Terry" wrote in message ... I have a real strange situation here. I bought a new case for and old mobo a soyo SY-K7VIA. When assembled the power does not come on. I get nothing.When I lay the mother board out on a static mat and hook up the power supply with the vid card and the floopy and the HD it boots up no problem!Very strange.Anybody ever heard of this situation. Terry Yes...something is "grounding out" be sure to examime all mounting points and stand offs carefully |
Thread Tools | |
Display Modes | |
|
|