|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
September 23rd 04, 08:19 AM
|
|||
|
|||
Driver Update ?
Hi all,
Older Compaq Notebook Presario 1694 Run Win 98se I recently run WMDiag and here are some comments: I try to locate an updated driver but cannot find it. Can someone help. Thanks Philippe DxDiag Notes ------------ Display Tab 1: Hardware-accelerated Direct3D 9 is not available because the display driver does not support it. You may be able to get a newer driver from the hardware manufacturer. Display Devices --------------- Card name: RAGE LT PRO AGP 2X (English) Manufacturer: ATI Tech. - Enhanced Chip type: Mach64LT DAC type: Internal Device Key: Enum\PCI\VEN_1002&DEV_4C42&SUBSYS_B11B0E11&REV_DC\ 000800 Display Memory: 8.0 MB Current Mode: 1024 x 768 (24 bit)(optimal refresh rate) Monitor: Default Monitor Monitor Max Res: Driver Name: macxw4.drv Driver Version: 4.11.0001.2545 (English) DDI Version: 6 Driver Attributes: Final Retail Driver Date/Size: 1/28/1999 13:46:00, 266800 bytes WHQL Logo'd: Yes WHQL Date Stamp: n/a VDD: *vdd,*vflatd Mini VDD: macxw4.vxd Mini VDD Date: , 0 bytes Device Identifier: {D7B71EE2-0F02-11CF-047E-1A9178C2C935} Vendor ID: 0x1002 Device ID: 0x4C42 SubSys ID: 0xB11B0E11 Revision ID: 0x00DC Revision ID: 0x00DC Video Accel: Deinterlace Caps: n/a Registry: OK DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled DDraw Test Result: Not run D3D7 Test Result: Not run D3D8 Test Result: Not run D3D9 Test Result: Not run 
|
|
#2
September 23rd 04, 08:37 AM
|
|||
|
|||
|
On 9/23/2004 12:19 AM Jumbo brightened our day with:
Hi all, Older Compaq Notebook Presario 1694 Run Win 98se I recently run WMDiag and here are some comments: I try to locate an updated driver but cannot find it. Can someone help. Thanks Philippe http://ati.com/support/driver.html An updated, yet still probably 3 year old, driver isn't going to do you much good. -- "...forged but accurate." Steve ¤»Inglo«¤ www.inglostadt.com
|
|
#3
September 23rd 04, 11:18 AM
|
|||
|
|||
|
Hi Inglo how are you, it's lunch time here 12:07 PM ...French Time and I
guess 3:07 AM in LA, Cali... still need to find the old driver cause mine is damaged I guess... better find one recent if some has it... Thanks all http://www.timeanddate.com/worldclock/full.html Just for info the link above ^ http://www.timeanddate.com/worldclock/city.html?n=181 Mine is ^ Philippe :-))) "Inglo" ioo@??.¿¿¿ wrote in message . .. On 9/23/2004 12:19 AM Jumbo brightened our day with: Hi all, Older Compaq Notebook Presario 1694 Run Win 98se I recently run WMDiag and here are some comments: I try to locate an updated driver but cannot find it. Can someone help. Thanks Philippe http://ati.com/support/driver.html An updated, yet still probably 3 year old, driver isn't going to do you much good. -- "...forged but accurate." Steve ¤»Inglo«¤ www.inglostadt.com
|
|
#4
September 24th 04, 01:28 AM
|
|||
|
|||
|
http://www.ati.com/support/products/...=13&submit.y=7
This link takes you to the driver I use for this video chip. By the way DX9 is a waste on this machine, DX8.1 is the last one that works properly and even then there are some power saving mode issues. "Jumbo" wrote in message r... Hi all, Older Compaq Notebook Presario 1694 Run Win 98se I recently run WMDiag and here are some comments: I try to locate an updated driver but cannot find it. Can someone help. Thanks Philippe DxDiag Notes ------------ Display Tab 1: Hardware-accelerated Direct3D 9 is not available because the display driver does not support it. You may be able to get a newer driver from the hardware manufacturer. Display Devices --------------- Card name: RAGE LT PRO AGP 2X (English) Manufacturer: ATI Tech. - Enhanced Chip type: Mach64LT DAC type: Internal Device Key: Enum\PCI\VEN_1002&DEV_4C42&SUBSYS_B11B0E11&REV_DC\ 000800 Display Memory: 8.0 MB Current Mode: 1024 x 768 (24 bit)(optimal refresh rate) Monitor: Default Monitor Monitor Max Res: Driver Name: macxw4.drv Driver Version: 4.11.0001.2545 (English) DDI Version: 6 Driver Attributes: Final Retail Driver Date/Size: 1/28/1999 13:46:00, 266800 bytes WHQL Logo'd: Yes WHQL Date Stamp: n/a VDD: *vdd,*vflatd Mini VDD: macxw4.vxd Mini VDD Date: , 0 bytes Device Identifier: {D7B71EE2-0F02-11CF-047E-1A9178C2C935} Vendor ID: 0x1002 Device ID: 0x4C42 SubSys ID: 0xB11B0E11 Revision ID: 0x00DC Revision ID: 0x00DC Video Accel: Deinterlace Caps: n/a Registry: OK DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled DDraw Test Result: Not run D3D7 Test Result: Not run D3D8 Test Result: Not run D3D9 Test Result: Not run
|
|
#5
September 24th 04, 10:23 AM
|
|||
|
|||
|
Hi Greg,
and thank you for the link and advice. I change DX to 8.1 and change ATI drivers as well. Everything seems to work fine and ok . Thank you for your help. Philippe "Greg" wrote in message ... http://www.ati.com/support/products/...=13&submit.y=7 This link takes you to the driver I use for this video chip. By the way DX9 is a waste on this machine, DX8.1 is the last one that works properly and even then there are some power saving mode issues. "Jumbo" wrote in message r... Hi all, Older Compaq Notebook Presario 1694 Run Win 98se I recently run WMDiag and here are some comments: I try to locate an updated driver but cannot find it. Can someone help. Thanks Philippe DxDiag Notes ------------ Display Tab 1: Hardware-accelerated Direct3D 9 is not available because the display driver does not support it. You may be able to get a newer driver from the hardware manufacturer. Display Devices --------------- Card name: RAGE LT PRO AGP 2X (English) Manufacturer: ATI Tech. - Enhanced Chip type: Mach64LT DAC type: Internal Device Key: Enum\PCI\VEN_1002&DEV_4C42&SUBSYS_B11B0E11&REV_DC\ 000800 Display Memory: 8.0 MB Current Mode: 1024 x 768 (24 bit)(optimal refresh rate) Monitor: Default Monitor Monitor Max Res: Driver Name: macxw4.drv Driver Version: 4.11.0001.2545 (English) DDI Version: 6 Driver Attributes: Final Retail Driver Date/Size: 1/28/1999 13:46:00, 266800 bytes WHQL Logo'd: Yes WHQL Date Stamp: n/a VDD: *vdd,*vflatd Mini VDD: macxw4.vxd Mini VDD Date: , 0 bytes Device Identifier: {D7B71EE2-0F02-11CF-047E-1A9178C2C935} Vendor ID: 0x1002 Device ID: 0x4C42 SubSys ID: 0xB11B0E11 Revision ID: 0x00DC Revision ID: 0x00DC Video Accel: Deinterlace Caps: n/a Registry: OK DDraw Status: Enabled D3D Status: Enabled AGP Status: Enabled DDraw Test Result: Not run D3D7 Test Result: Not run D3D8 Test Result: Not run D3D9 Test Result: Not run
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A7N8X-E Which nForce driver??? | Joe101 | Asus Motherboards | 3 | October 28th 04 06:37 AM |
| More important to update BIOS or driver? | Adriano | Asus Motherboards | 8 | September 19th 04 01:47 AM |
| my new mobo o/c's great | rockerrock | Overclocking AMD Processors | 9 | June 30th 04 08:17 PM |
| 9700 Pro Crash during benchmark with 3dmark03 | Sean | Ati Videocards | 5 | December 17th 03 03:47 PM |
| A7A266: Worthwhile to update to BIOS revision 1012 & V5.12.01.0638 audio driver? | Paul Moloney | Asus Motherboards | 4 | December 12th 03 04:11 PM |
Linear Mode
