A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Adding two additional NICs to Optiplex 3010 mini tower



 
 
Thread Tools Display Modes
  #1  
Old March 11th 18, 05:13 AM posted to alt.comp.hardware
t
external usenet poster
 
Posts: 77
Default Adding two additional NICs to Optiplex 3010 mini tower


The Optiplex is required to connect to three networks so we need to add
two additional Network Interface Cards.

The machine can support only 8GB maximum RAM from
http://www.dell.com/downloads/global...ok.pdf#page=11

It would be running Windows 10 Professional 64 bit.

1. It has PCI slots vacant so
would getting two network cards at
http://accessories.us.dell.com/sna/p...04306684114868
work?

2. Or, would getting something like
https://www.amazon.com/gp/product/B00965J4TS/ be better?
Or, is some other brand better for dual NIC?

Does anything else need to be changed when the motherboard is supporting
3 NICs?

Any suggestions would be helpful.
  #2  
Old March 11th 18, 05:33 AM posted to alt.comp.hardware
t
external usenet poster
 
Posts: 77
Default Adding two additional NICs to Optiplex 3010 mini tower

On 3/10/2018 11:13 PM, t wrote:

The Optiplex is required to connect to three networks so we need to add
two additional Network Interface Cards.

The machine can support only 8GB maximum RAM from
http://www.dell.com/downloads/global...ok.pdf#page=11


It would be running Windows 10 Professional 64 bit.

1. It has PCI slots vacant so
would getting two network cards at
http://accessories.us.dell.com/sna/p...04306684114868

work?

2. Or, would getting something like
https://www.amazon.com/gp/product/B00965J4TS/ be better?
Or, is some other brand better for dual NIC?

3. Does anything else need to be changed when the motherboard is supporting
3 NICs?

4. Is going with a brand name like Intel
https://www.amazon.com/gp/product/B000BMZHX2/ better?

  #3  
Old March 11th 18, 03:15 PM posted to alt.comp.hardware
Paul[_28_]
external usenet poster
 
Posts: 1,467
Default Adding two additional NICs to Optiplex 3010 mini tower

t wrote:
On 3/10/2018 11:13 PM, t wrote:

The Optiplex is required to connect to three networks so we need to add
two additional Network Interface Cards.

The machine can support only 8GB maximum RAM from
http://www.dell.com/downloads/global...ok.pdf#page=11



It would be running Windows 10 Professional 64 bit.

1. It has PCI slots vacant so
would getting two network cards at
http://accessories.us.dell.com/sna/p...04306684114868


work?

2. Or, would getting something like
https://www.amazon.com/gp/product/B00965J4TS/ be better?
Or, is some other brand better for dual NIC?

3. Does anything else need to be changed when the motherboard is
supporting
3 NICs?

4. Is going with a brand name like Intel
https://www.amazon.com/gp/product/B000BMZHX2/ better?


That's the one I spotted on Newegg. This one isn't sold by
Newegg, but drop-shipped from somewhere else (that's what the 9S
code means).

https://www.newegg.com/Product/Produ...9SIAD5G6HJ1702

That seems to have an x4 PCI Express interface on it. Which is good,
except when you don't have a slot for it. The x4 would fit in the
video card x16 slot of course, but that may be occupied by your
video card right now.

With your luck, your machine doesn't have the right slot
mix for the project. Imagine two NICs trying to serve 112MB/sec
at the same time (while plugged into an old PCI slot, not a PCIe slot),
and the slot lets them down. How embarrassing. That's why you want
to use your weather-eye to suss the situation.

The NICs would still work in such a situation, but the
person who installed them would have naughty words
spoken about them later :-)

OK, you provided the Guide Book link, which helps. One machine
picture shows an x16 PCIe for a video card (as well as the
CPU graphics option, a GPU that could be inside the CPU).
The other three slots are PCIe x1. They never seem to
volunteer chipset info (PCH???), so I can't add any more
details to my diagram as a result.

DIMMs --- CPU ---x16--- Video card
|
| DMI bus (can be a bottleneck, but not usually)
|
SATA ---- PCH??? --- x1 PCIe slot
SATA --- x1 PCIe slot
--- x1 PCIe slot

You can put a nice Intel PCIe x1 NIC card in the remaining
slots. Check and make sure the slots are free first, as the
factory could have put a TV tuner or other junk in one
of those slots.

Buying single NIC cards would be perfectly fine. The alternative,
sliding some RealTek **** in there, um... Just get a couple
single slot Intel NICs for them to use.

The typical Intel NIC for sale on these sites, they're sold in
bulk, in a plastic bag, with *no* driver CD. Always check
the advert for scams such as no driver CD.

https://www.newegg.com/Product/Produ...9SIA4A054E7126

https://images10.newegg.com/ProductI...106-036-06.jpg

So the picture shows this one is a cardboard box version and
at least it doesn't ship in a *non-antistatic* bag :-/ The
picture shows a CD, and if it arrives without a CD, give
the seller a bad review for me :-)

Even a PCIe Rev1.1 slot at 250MB/sec full-duplex is sufficient
for 112MB/sec Ethernet (which also works full-duplex).

The processor slot usually has a PCIe revision higher than the
PCH based slots. Sometimes the CPU has PCIe Rev3 for the x16
video slot, and maybe PCIe Rev2 off the PCH (500MB/sec on a
single lane, not bad). When you're installing PCIe cards,
you have to check the card and the mobo, to see if the
lowest common denominator is sufficient for the application.
For example, this is important if you buy BlackMagic cards
for video capture or editing.

If that dual Intel NIC with the x4 connector on it, was magically
stuffed into an x1 slot, it would probably run full speed. It's
only the older PCI ~100MB/sec bus which would be limiting the
NICs and wouldn't be fair to the customer. My old Pentium 4 system,
the chipset in it had a second bus called CSI, which operated
at 266MB/sec and that bus was custom crafted just for NICs.
And in this case, your PCIe x1 slots, even in the worst case,
are 250MB/sec and perfectly good for single (or even dual)
GbE NICs.

I don't see too much that can go wrong here, except
for not checking for blank slots for the project :-)
The four slots are all PCI Express type. No vanilla PCI to be seen.

Paul
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding a SSD to Optiplex 790 mini tower t General 3 March 11th 18 07:19 PM
Upgrading graphic card for Dell Optiplex 7010 mini tower runningWindows 7 64 bit t General 8 March 11th 18 05:10 AM
Using a USB to HDMI adapter to use a TV screen as a third monitorfor a Dell Optiplex 3010 t General 8 February 18th 14 03:58 PM
Ordering an Optiplex 380 Mini Tower jim_tehma (e-mail isn't checked) Dell Computers 29 April 20th 11 06:21 PM
Adding additional HDD to server Tony Dell Computers 0 November 3rd 03 03:24 PM


All times are GMT +1. The time now is 03:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.