If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
5x.xx dets and PAL tv-out, wrong aspect ratio?
Hi,
When I use the (beta) detonators of the 5x.xx series I have a tiny TV-out problem. When using 720x576 resolution (native PAL), the aspect ratio on the TV is slightly wrong (too wide). Easy test: place a picture of a 300x300 circle on your desktop/tv-out (I use clone-mode). I use: WinXP, GF4MX440 any 5x.xx driver and a PAL tv via S-video out. Does anybody else have this, or is it just me? I know 720x576 is not a 4:3 resolution, but that does not matter, because it is the native PAL resolution (and therefore has the best image quality and a correct aspect ratio on the TV). If the aspect ratio of 720x576 were the issue, I think the image displayed would have been too narrow (since 1.25:1 is smaller than 1.33:1). The fact that the drivers have compensate for the aspect ratio probably does have _something_ to do with it. The 45.23 (and earlier) do not have this problem, but these drivers have a problem with displaying DVD-movies: when the TV-out is set to 720x576, the image is cropped at the left side (and the bottom). This is fixed with 5x.xx dets, but another 'problem' returned. I tried 51.75, 52.13 and 51.16; I completely removed the previous drivers. Jake |
Thread Tools | |
Display Modes | |
|
|