If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Nero and dvd-r failure
"Blair Wilson" wrote in message news:... HELP NEEDED!! I am unable to create DVDs using Nero 6.3.0.2 and (TDK/Imation) 4x DVD-Rs (the 2.x blanks fail too). I get a lot of scsi/sense key errors. Has anybody experience this type of problem? I can burn DVD+R with Nero and (TDK/Imation) blanks DVDs with no problem. My DVD burner is a Sony DRU-510A. The OS is Windows XP Pro SP1. The drivers are ASPI32.SYS ver 4.60 and Imagedrv.sys ver 2.23.0.0. I have attached the log file from the burn failure. An.all suggestions are welcomed. As always thanks in advance. Blair Wilson BlayrNet Inc 1A23-0031-5030-1517-2237-6875 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM Nero version: 6.3.0.2 Recorder: SONY DVD RW DRU-510A Version: 1.0f - HA 5 TA 0 - 6.3.0.2 Adapter driver: HA 5 Drive buffer : 8192kB Bus Type : default (0) - ATAPI, detected: ? CD-ROM: NERO IMAGEDRIVE2 Version: 1.0h - HA 0 TA 0 - 6.3.0.2 Adapter driver: Imagedrv HA 0 === Scsi-Device-Map === CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0 DMA: Off CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 1 DMA: Off CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 2 ID 0 DMA: On DiskPeripheral : WDC WD1000BB-00CAA0 atapi Port 2 ID 1 DMA: On CdRomPeripheral : LITE-ON LTR-52246S atapi Port 3 ID 0 DMA: On DiskPeripheral : HP 9.10GB A 80-S94CS94C aic78xx Port 4 ID 0 DMA: Off TapePeripheral : QUANTUM DLT7000 1624 aic78xx Port 4 ID 4 DMA: Off CdRomPeripheral : PLEXTOR CD-ROM PX-40TS 1.01 aic78xx Port 4 ID 6 DMA: Off === CDRom-Device-Map === NERO IMAGEDRIVE2 N: CDRom3 NERO IMAGEDRIVE2 O: CDRom4 ELBY DVD-ROM M: CDRom2 LITE-ON LTR-52246S K: CDRom1 PLEXTOR CD-ROM PX-40TS J: CDRom0 SONY DVD RW DRU-510A L: CDRom5 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 216MB (221360kB) Memory in use : 57 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.2.2004 ISO compilation 10:55:10 PM #1 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:55:10 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 10:55:10 PM #3 Text 0 File Writer.cpp, Line 124 Writer SONY DVD RW DRU-510A running 10:55:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 10:55:11 PM #5 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 10:55:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2205839 (490:11.14, 4308MB) 10:55:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 10:55:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: SONY DVD RW DRU-510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AF1 Disc Application Code: 64, Disc Physical Code: 193 10:55:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 406 Protocol of DlgWaitCD activities: ========================================= 10:55:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2205840 (2205840) = #2205840/490:11.15 relocatable, disc pos for caching/writing not required/required, no patch infos - TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2205840 blocks [SONY DVD RW DRU-510A ] -------------------------------------------------------------- 10:55:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [SONY DVD RW DRU-510A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4517560320, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2205840 | lead-out | 1 | 0x00 | 0x41 10:55:11 PM #12 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 10:55:11 PM #13 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 10:55:11 PM #14 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 10:55:11 PM #15 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 4x (5,520 KB/s) 10:55:12 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:55:12 PM #17 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 13:41,294 (821294ms) - OK 10:55:12 PM #18 Text 0 File DVDR.cpp, Line 1512 Recording mode: Sequential Recording Mode 10:55:12 PM #19 Text 0 File Mmc.cpp, Line 19451 Set BUFE: Power-Burn - ON 10:55:12 PM #20 Text 0 File DVDR.cpp, Line 1643 Start write address at LBA 0 DVD high compatibility mode: Yes 10:55:12 PM #21 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structu Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: not specified (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................. 10:55:13 PM #22 Text 0 File Cdrdrv.cpp, Line 1277 22:55:13.888 - SONY DVD RW DRU-510A\H5 T0 : Queue again later 10:55:20 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03260000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 10:55:20 PM #24 CDR -500 File Writer.cpp, Line 301 SCSI command aborted SONY DVD RW DRU-510A\H5 T0 10:55:20 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:55:20 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:55:20 PM #27 Text 0 File DVDR.cpp, Line 1847 EndDAO: Last written address was 2239 10:56:21 PM #28 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) - OK 10:56:21 PM #29 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) - OK 10:56:21 PM #30 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\imagedrv.sys': Ver=2.23.0.0, size=89184 bytes, created 12/19/2003 7:48:40 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Blair |
#2
|
|||
|
|||
.. --------------------------------------
Mike Richter, were you born with "Scam Artist" emblazoned on your face? -------------------------------------- (Mike Richter, any Material Connection w/ Roxio?) http://groups.google.com/groups?selm...mindspring.com (Messages 10, 12 -- 34, 54 -- 69) ( No pipsqueaks have been able to prove ANY of the above is a libel ) ( -- despite Mikey's supposed to have proof of misquotes! ) Try the just released 6.3.0.3 ? Blair Wilson wrote: "Blair Wilson" wrote in message news:... HELP NEEDED!! I am unable to create DVDs using Nero 6.3.0.2 and (TDK/Imation) 4x DVD-Rs (the 2.x blanks fail too). I get a lot of scsi/sense key errors. Has anybody experience this type of problem? I can burn DVD+R with Nero and (TDK/Imation) blanks DVDs with no problem. My DVD burner is a Sony DRU-510A. The OS is Windows XP Pro SP1. The drivers are ASPI32.SYS ver 4.60 and Imagedrv.sys ver 2.23.0.0. I have attached the log file from the burn failure. An.all suggestions are welcomed. As always thanks in advance. Blair Wilson BlayrNet Inc 1A23-0031-5030-1517-2237-6875 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM Nero version: 6.3.0.2 Recorder: SONY DVD RW DRU-510A Version: 1.0f - HA 5 TA 0 - 6.3.0.2 Adapter driver: HA 5 Drive buffer : 8192kB Bus Type : default (0) - ATAPI, detected: ? CD-ROM: NERO IMAGEDRIVE2 Version: 1.0h - HA 0 TA 0 - 6.3.0.2 Adapter driver: Imagedrv HA 0 === Scsi-Device-Map === CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0 DMA: Off CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 1 DMA: Off CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 2 ID 0 DMA: On DiskPeripheral : WDC WD1000BB-00CAA0 atapi Port 2 ID 1 DMA: On CdRomPeripheral : LITE-ON LTR-52246S atapi Port 3 ID 0 DMA: On DiskPeripheral : HP 9.10GB A 80-S94CS94C aic78xx Port 4 ID 0 DMA: Off TapePeripheral : QUANTUM DLT7000 1624 aic78xx Port 4 ID 4 DMA: Off CdRomPeripheral : PLEXTOR CD-ROM PX-40TS 1.01 aic78xx Port 4 ID 6 DMA: Off === CDRom-Device-Map === NERO IMAGEDRIVE2 N: CDRom3 NERO IMAGEDRIVE2 O: CDRom4 ELBY DVD-ROM M: CDRom2 LITE-ON LTR-52246S K: CDRom1 PLEXTOR CD-ROM PX-40TS J: CDRom0 SONY DVD RW DRU-510A L: CDRom5 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 216MB (221360kB) Memory in use : 57 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.2.2004 ISO compilation 10:55:10 PM #1 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:55:10 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 10:55:10 PM #3 Text 0 File Writer.cpp, Line 124 Writer SONY DVD RW DRU-510A running 10:55:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 10:55:11 PM #5 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 10:55:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2205839 (490:11.14, 4308MB) 10:55:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 10:55:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: SONY DVD RW DRU-510A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AF1 Disc Application Code: 64, Disc Physical Code: 193 10:55:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 406 Protocol of DlgWaitCD activities: ========================================= 10:55:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2205840 (2205840) = #2205840/490:11.15 relocatable, disc pos for caching/writing not required/required, no patch infos - TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2205840 blocks [SONY DVD RW DRU-510A ] -------------------------------------------------------------- 10:55:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [SONY DVD RW DRU-510A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4517560320, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2205840 | lead-out | 1 | 0x00 | 0x41 10:55:11 PM #12 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 10:55:11 PM #13 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 10:55:11 PM #14 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 10:55:11 PM #15 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 4x (5,520 KB/s) 10:55:12 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:55:12 PM #17 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 13:41,294 (821294ms) - OK 10:55:12 PM #18 Text 0 File DVDR.cpp, Line 1512 Recording mode: Sequential Recording Mode 10:55:12 PM #19 Text 0 File Mmc.cpp, Line 19451 Set BUFE: Power-Burn - ON 10:55:12 PM #20 Text 0 File DVDR.cpp, Line 1643 Start write address at LBA 0 DVD high compatibility mode: Yes 10:55:12 PM #21 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structu Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: not specified (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:55:13 PM #22 Text 0 File Cdrdrv.cpp, Line 1277 22:55:13.888 - SONY DVD RW DRU-510A\H5 T0 : Queue again later 10:55:20 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03260000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 10:55:20 PM #24 CDR -500 File Writer.cpp, Line 301 SCSI command aborted SONY DVD RW DRU-510A\H5 T0 10:55:20 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:55:20 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 10:55:20 PM #27 Text 0 File DVDR.cpp, Line 1847 EndDAO: Last written address was 2239 10:56:21 PM #28 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) - OK 10:56:21 PM #29 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) - OK 10:56:21 PM #30 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\imagedrv.sys': Ver=2.23.0.0, size=89184 bytes, created 12/19/2003 7:48:40 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Blair |
Thread Tools | |
Display Modes | |
|
|