If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Trying to install Win2000 on harddrive with bad C partition
I have one hard drive on this computer and it's developed some serious problems. It's an IBM 40 GB hard drive, about 3 years old. There are three partitions:
C: 25GB NTFS D: 5GB FAT32 E: 10GB NTFS The D partition is accessible via Dos, and tests good (Spinrite, and other programs). I had Win2000 installed on the C drive, WinXP on the E drive. When I try to start the computer I'm receiving a Disk Read Error, and other testing programs show both C and E drives as bad. I'd like to install Windows 2000 on the good D drive and see if I can recover some data. But when I start up the Win2000 bootable CD, and chose D drive for installation, the next screen tells me that C drive is in an unreadable format and needs to be reformated, and won't go past that point without my reformating the C drive. I'm guessing that the boot partition has to be on C drive and is corrupted, so I can't start up the original OS and I can't install Win2000 on the good partition. Is there a solution to this problem. Is there a way to install Win2000 (or WinXP) and have the boot partition be on the D drive. I've also run HDD Regenerator (from a floppy disk) and "regenerated"(repaired) all the bad sectors on the entire hard drive, but I still can't boot into an operating system. Any suggestions? jc |
#2
|
|||
|
|||
Trying to install Win2000 on harddrive with bad C partition
"jbclem" writes:
I have one hard drive on this computer and it's developed some serious problems. It's an IBM 40 GB hard drive, about 3 years old. There are three partitions: C: 25GB NTFS D: 5GB FAT32 E: 10GB NTFS The D partition is accessible via Dos, and tests good (Spinrite, and other programs). I had Win2000 installed on the C drive, WinXP on the E drive. When I try to start the computer I'm receiving a Disk Read Error, and other testing programs show both C and E drives as bad. I'd like to install Windows 2000 on the good D drive and see if I can recover some data. This is a futile effort and you're wasting your time with that installation I'm afraid. Hard disk is dying, and the more you do with it the more errors you create on the disk that you wish to recover from. Any suggestions? Indeed. This is an excellent job for a bootable Linux live CD. There are a dizzying array of such CD's known collectively as "Knoppix" CD's--all are based on the Linux operating system. Now, assuming you have a functioning computer from which you're posting that has a CD burner, download an ISO image of the CD and use your CD recording program's "make disk from image" function with that ISO to create the bootable CD. One I'll recommend is System Rescue CD http://www.sysresccd.org/Main_Page Todd's Impromptu Mini Howto On recovering Windows files with System Rescue CD ---------------------------------------------------------------------- Concept: once you boot the CD, you can mount the dying drive and its partitions as read-only and then copy data off of it onto an external drive (usb hard disk, usb thumb drive, etc). So, boot the CD. Hopefully your computer is setup to boot from a CD-ROM. If it's not, play with BIOS settings to make it happen. At the scary looking initial boot: prompt, just hit enter. You'll see a bunch of fun text as Knoppix/Linux figures out your hardware and does generally the right thing. Next is the keymap selection: prompt. Enter 41 for us english and hit enter. More fun text goes by. At last you end up at the hallowed linux bash command prompt, auto logged in as user root (the adminstator ID of linux). At that prompt, do these commands. The commands start after the % sign. We're makin a directory as a mount point, mounting your dead drive to that mount point changing directories to that mount point and doing the linux equivalent of "dir" the root@sysresccd /root % mkdir /mnt/myharddisk root@sysresccd /root % mount -t ntfs /dev/sda1 /mnt/myharddisk root@sysresccd /root % cd /mnt/myharddisk root@sysresccd /root % ls If you see a directory listing of your c: drive, praise Jesus cus yer readin that damaged drive with another operating system. Pat self on back because I don't care how many times you've done it, it just feels cool. Okay, we can read your disk, now we need somewhere to copy it to. Grab your favorite USB drive (external hard disk, flash thumb drive, whatever). It makes life a lot easier if it's formatted FAT rather than ntfs. When you plug it in, look on the screen for some messages. Oh maybe 10 lines worth. If it says SCSI device sdb: blah blah sdb: blah sdb: blah ... If it says sdb like that, then that's the name the system has given to your newly inserted usb drive. Its first (and probably only) partition is gonna be /dev/sdb1. We'll use that in the next commands. Note that if it says sdc or sdd or whatever, modify that third letter in the mount command below accordingly. So let's make a mount point for the external drive, and then mount it so we have somewhere to copy our data to: root@sysresccd /root % mkdir /mnt/myusbdrive root@sysresccd /root % mount /dev/sdb1 /mnt/myusbdrive If you wanna verify your work up to now, the mount command should list /mnt/myusbdrive and /mnt/myharddisk among its mounted devices. Try it: root@sysresccd /root % mount Now we're ready to do some file copying. Now if you wanna try to copy the whole stinkin c drive to the external drive and have the space time and patience, go for it: root@sysresccd /root % cp -R /mnt/myharddisk/* /mnt/myusbdrive and wait a long time. But, I'd recommend being more granular because it is a damaged disk and the likelihood of encountering errors trying to copy the whole partition is pretty darned high. So for example, to go after My Documents, do: root@sysresccd /root % cp -R /mnt/myharddisk/Documents\ and\ Settings/YOURUSERNAME/My\ Documents /mnt/myusbdrive And it'll copy your MyDocuments directory over the usbdrive. Notice the back slashes before the spaces in Windows stupid fiel/directory names. You need those. and notice that directory delimiters in linux are forward slashes rather than backslashes. The cp command is the "copy files" command. Now, if you wanna poke around the failed disk and look for more goodies to grab, you'll need to only know the unix commands cd to change directory, ls to list directory contents and the cp command to copy. The -R switch of the cp command says "recursively copy all stuff under that directory too" man command to read the documentation on these commands or any other. e.g. "man ls" will show you all about the ls command. Welcome to your (perhaps) first Linux experience. Tell em Todd sent ya. Now, if you run into problems, please don't email me. I will try to be helpful if you post in this thread in the newsgroup, however, as time permits. Caveat: I have a relatively fresh baby human around here, and you, as nice a person as I'm sure you are, aren't my priority. :-) I hope this helps! Give it a go! There are other ways to skin this cat such as removing your hard disk and putting it into another computer, but, that's just not as fun. Best Regards, -- Todd H. http://www.toddh.net/ |
#4
|
|||
|
|||
Trying to install Win2000 on harddrive with bad C partition
jbclem wrote:
I have one hard drive on this computer and it's developed some serious problems. It's an IBM 40 GB hard drive, about 3 years old. There are three partitions: C: 25GB NTFS D: 5GB FAT32 E: 10GB NTFS The D partition is accessible via Dos, and tests good (Spinrite, and other programs). I had Win2000 installed on the C drive, WinXP on the E drive. When I try to start the computer I'm receiving a Disk Read Error, and other testing programs show both C and E drives as bad. I'd like to install Windows 2000 on the good D drive and see if I can recover some data. Its better to boot a knoppix CD and recover the data that way. But when I start up the Win2000 bootable CD, and chose D drive for installation, the next screen tells me that C drive is in an unreadable format and needs to be reformated, and won't go past that point without my reformating the C drive. I'm guessing that the boot partition has to be on C drive and is corrupted, so I can't start up the original OS and I can't install Win2000 on the good partition. Is there a solution to this problem. Yes, see above. Is there a way to install Win2000 (or WinXP) and have the boot partition be on the D drive. Safer to boot a CD instead. The hard drive may well be pretty sick and you dont want to write anything to it. I've also run HDD Regenerator (from a floppy disk) and "regenerated"(repaired) all the bad sectors on the entire hard drive, but I still can't boot into an operating system. Any suggestions? See above. |
#5
|
|||
|
|||
Trying to install Win2000 on harddrive with bad C partition
What I finally did...installed a new hard drive, then ran the "bad" one as a
slave. When I rebooted, chkdsk ran and spent a lot of time repairing the "bad" hard drive...but when it was finished the "bad" hard drive was completely accessible, all files saved (as far as I can tell). Now I'm really puzzled, after all the dire error messages and inability of other software to access the two bad partitions, now I've regained access to everything and it seems to be functioning normally. When I reboot, the computer boots up with no interference from chkdsk. I'll try running some programs to see if I can see any SMART failure messages, but as of now I'm not sure whether to trust this hard drive or not. jc "Rod Speed" wrote in message ... jbclem wrote: I have one hard drive on this computer and it's developed some serious problems. It's an IBM 40 GB hard drive, about 3 years old. There are three partitions: C: 25GB NTFS D: 5GB FAT32 E: 10GB NTFS The D partition is accessible via Dos, and tests good (Spinrite, and other programs). I had Win2000 installed on the C drive, WinXP on the E drive. When I try to start the computer I'm receiving a Disk Read Error, and other testing programs show both C and E drives as bad. I'd like to install Windows 2000 on the good D drive and see if I can recover some data. Its better to boot a knoppix CD and recover the data that way. But when I start up the Win2000 bootable CD, and chose D drive for installation, the next screen tells me that C drive is in an unreadable format and needs to be reformated, and won't go past that point without my reformating the C drive. I'm guessing that the boot partition has to be on C drive and is corrupted, so I can't start up the original OS and I can't install Win2000 on the good partition. Is there a solution to this problem. Yes, see above. Is there a way to install Win2000 (or WinXP) and have the boot partition be on the D drive. Safer to boot a CD instead. The hard drive may well be pretty sick and you dont want to write anything to it. I've also run HDD Regenerator (from a floppy disk) and "regenerated"(repaired) all the bad sectors on the entire hard drive, but I still can't boot into an operating system. Any suggestions? See above. |
#6
|
|||
|
|||
Trying to install Win2000 on harddrive with bad C partition
jbclem wrote:
What I finally did...installed a new hard drive, then ran the "bad" one as a slave. When I rebooted, chkdsk ran and spent a lot of time repairing the "bad" hard drive... Thats a bit of a dangerous approach, but it looks like it worked this time. but when it was finished the "bad" hard drive was completely accessible, all files saved (as far as I can tell). Now I'm really puzzled, after all the dire error messages and inability of other software to access the two bad partitions, now I've regained access to everything and it seems to be functioning normally. When I reboot, the computer boots up with no interference from chkdsk. I'll try running some programs to see if I can see any SMART failure messages, It would be best to get an Everest SMART report first. http://www.majorgeeks.com/download.php?det=4181 but as of now I'm not sure whether to trust this hard drive or not. The Everest SMART report should help quite a bit with that. Rod Speed wrote jbclem wrote I have one hard drive on this computer and it's developed some serious problems. It's an IBM 40 GB hard drive, about 3 years old. There are three partitions: C: 25GB NTFS D: 5GB FAT32 E: 10GB NTFS The D partition is accessible via Dos, and tests good (Spinrite, and other programs). I had Win2000 installed on the C drive, WinXP on the E drive. When I try to start the computer I'm receiving a Disk Read Error, and other testing programs show both C and E drives as bad. I'd like to install Windows 2000 on the good D drive and see if I can recover some data. Its better to boot a knoppix CD and recover the data that way. But when I start up the Win2000 bootable CD, and chose D drive for installation, the next screen tells me that C drive is in an unreadable format and needs to be reformated, and won't go past that point without my reformating the C drive. I'm guessing that the boot partition has to be on C drive and is corrupted, so I can't start up the original OS and I can't install Win2000 on the good partition. Is there a solution to this problem. Yes, see above. Is there a way to install Win2000 (or WinXP) and have the boot partition be on the D drive. Safer to boot a CD instead. The hard drive may well be pretty sick and you dont want to write anything to it. I've also run HDD Regenerator (from a floppy disk) and "regenerated"(repaired) all the bad sectors on the entire hard drive, but I still can't boot into an operating system. Any suggestions? See above. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Disk Management - New Partition option Greyed Out | Tapas Das | Dell Computers | 3 | March 23rd 05 03:58 PM |
PartitionMagic Question | Harvey Gratt | Storage (alternative) | 43 | February 5th 05 08:20 PM |
Please Help | Mary | Ati Videocards | 36 | February 29th 04 07:28 PM |
Partition Magic crashes during partition move, resulting in PqRT | Jonas Carlsson | Storage (alternative) | 5 | August 5th 03 08:55 AM |
ABOUT PqRP - The PqRP de- mystified - PqRP FAQ - RFC | Joep | Storage (alternative) | 0 | July 24th 03 02:31 PM |