If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
On Thu, 31 Jul 2003 15:23:48 -0700
Lenroc wrote: On Thu, 31 Jul 2003 20:10:19 +0000, Te said: Is there a forum for using the AIW in a HTPC? I have a HTPC system with an AIW 8500DV, and want to schedule recordings from DirecTV... and this is not a supported feature of the MMC 8.5 software(bummer). The DirecTV box connects via the serial port - and works quite well, but I need something to setup the scheduling now. and I'm stuck... Any advice or pointing me in the right direction would be appreciated. Since the AIW cannot tune in Satellite channels directly, you will need to have your DirectTV box tuned to the correct channel at the time you wish to record. Then, just set the AIW to record whatever channel you set it to to watch Satellite (probably you set the AIW to either channel 3 or 4, or you set it to Input 1 or something like that). You'll need to essentially set 2 recording timers, one on the MMC software, and one on the DirecTV box (if it supports that). If you can't do that, you'll just have to remember to tune the DirectTV box to the correct channel before the show starts It is possible to have the PC control the DirecTV box by any of several methods. Personally I have a DirecTivo which doesn't accept any of the methods that work with a standard DirecTV box so can't comment on what works and what doesn't. I believe that this is what the OP wants to do. HTH -- Lenroc -- -- --John Reply to jclarke at ae tee tee global dot net (was jclarke at eye bee em dot net) |
#2
|
|||
|
|||
ATI AIW/PVR forums?
Is there a forum for using the AIW in a HTPC?
I have a HTPC system with an AIW 8500DV, and want to schedule recordings from DirecTV... and this is not a supported feature of the MMC 8.5 software (bummer). The DirecTV box connects via the serial port - and works quite well, but I need something to setup the scheduling now. and I'm stuck... Any advice or pointing me in the right direction would be appreciated. Thanks |
#3
|
|||
|
|||
On Thu, 31 Jul 2003 19:16:39 +0000, J.Clarke said:
It is possible to have the PC control the DirecTV box by any of several methods. Personally I have a DirecTivo which doesn't accept any of the methods that work with a standard DirecTV box so can't comment on what works and what doesn't. I believe that this is what the OP wants to do. Interesting. I see now that the OP is probably asking about that. However, MMC does not have any way to send those control messages, correct? So it is possible you wouldn't need to set something on the DirecTV box, but you would need to set a record timer on whatever software is used to control the box. -- Lenroc |
#4
|
|||
|
|||
"Blood Dawg" wrote in message news On Thu, 31 Jul 2003 15:23:48 -0700, Lenroc wrote: On Thu, 31 Jul 2003 20:10:19 +0000, Te said: Is there a forum for using the AIW in a HTPC? I have a HTPC system with an AIW 8500DV, and want to schedule recordings from DirecTV... and this is not a supported feature of the MMC 8.5 software (bummer). The DirecTV box connects via the serial port - and works quite well, but I need something to setup the scheduling now. and I'm stuck... Any advice or pointing me in the right direction would be appreciated. Since the AIW cannot tune in Satellite channels directly, you will need to have your DirectTV box tuned to the correct channel at the time you wish to record. Then, just set the AIW to record whatever channel you set it to to watch Satellite (probably you set the AIW to either channel 3 or 4, or you set it to Input 1 or something like that). You'll need to essentially set 2 recording timers, one on the MMC software, and one on the DirecTV box (if it supports that). If you can't do that, you'll just have to remember to tune the DirectTV box to the correct channel before the show starts HTH This is one program that I know of, may be others. http://www.pcmx.net/dtvcon/ This program works well, and basically what I'm having to do IS setup 2 seperate schedules for anything to record... I wanted something easier and more cosmetically pleasing. Snapstream PVS is a awesome piece of software (even at $70), and it will do what I what- Including controlling the directv box via the serial cable. BUT it does support ATI's aiw card well... The capture quality is just plain terrible. I was hoping to hear someone maybe had a solution for this problem already. I find it hard to believe I'm the only one on the internet with this setup and issue. But - - - -Maybe. ?????????????????? Just in case anyone else is researching this, I know of a program called girder (girder.nl) which is a scripting/macro program, but I can't figure it out... That would also do what I want, but its not going to be any easier or more eye pleasing than the way I have it set now. I have read some stuff about xmltv files, but apparently there is not "per se" a front end that will incorporate both features (for MMC and dtvcon) so its kinda mute too... all that does is add 1 MORE step, which is not the idea. ATI needs to add support for plugins, and customizing how MMC schedules... If ONLY IT SUPPORTED THE CABLE LINK! Oh well. THANKS TO EVERYONE. (btw: is there like a AIW forum anywhere???) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Abit Forums? Can't post.. | Raphael Bustin | Abit Motherboards | 1 | July 14th 04 03:46 PM |
ASUS Forums ? | tony010409020622@spamthis@@hotmail.com | Asus Motherboards | 9 | May 23rd 04 05:08 PM |
Free Support forums various categories. | Askhow.net | General | 0 | January 12th 04 06:12 PM |
Nero Forums - Which one is best? | Brian K | Cdr | 2 | October 17th 03 05:34 PM |
Forums for cheap PC components | harp | General | 2 | July 11th 03 10:08 PM |