If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Gigabyte SIV (App Center program)
I have a new system on a Gigabyte GA-Z97X-UD5H board. I am having trouble configuring fan speed in a convenient way. It would be very helpful to have "documentation" for the various programs that come in the "SIV folder" (and some of their inter-dependencies--for example, what does "prerun.exe" do?). I would like to configure the program to run at startup (and am "floundering" with that so far). I have it controlling the fan speed acceptably, at start up, in my admin account, but not my user account, using the Windows7-Pro-64bit OS. It seemed to work better (i.e. without prompting me) after I reinstalled my Norton Security software "on top of it"--rather than the other way around. Is there a 64-bit version of the app center program? I think I could do a better job of this if I had more information. The one page in the user manual is not sufficient (the app center doesn't even run as described in the user manual--I cannot bring up the window shown on page 95 of the manual, for instance). Thank you for any assistance! Bill |
#2
|
|||
|
|||
Gigabyte SIV (App Center program)
Bill wrote:
I have a new system on a Gigabyte GA-Z97X-UD5H board. I am having trouble configuring fan speed in a convenient way. It would be very helpful to have "documentation" for the various programs that come in the "SIV folder" (and some of their inter-dependencies--for example, what does "prerun.exe" do?). I would like to configure the program to run at startup (and am "floundering" with that so far). I have it controlling the fan speed acceptably, at start up, in my admin account, but not my user account, using the Windows7-Pro-64bit OS. It seemed to work better (i.e. without prompting me) after I reinstalled my Norton Security software "on top of it"--rather than the other way around. Is there a 64-bit version of the app center program? I think I could do a better job of this if I had more information. The one page in the user manual is not sufficient (the app center doesn't even run as described in the user manual--I cannot bring up the window shown on page 95 of the manual, for instance). Thank you for any assistance! Bill Did you check the BIOS Setup screens first ? Sometimes, you can set up the fans in there, and never need a Windows (or Linux) program for it. Look for "Fan Speed Percentage" around page 49 of the manual. ******* For a free fan control program, there is Speedfan from almico.com. Maybe that will have better options than SIV. The program is for Windows. ******* If the SIV application is a Metro tile, it may not have the best behavior. Apparently, if you're not viewing the Tile window, the program can suspend itself (go to sleep) for later. http://stackoverflow.com/questions/1...up-a-metro-app ******* "I disabled C:\ProgramFiles (x86)\Gigabyte\GBTUpd\PreRun.exe in the msconfig start menu using CCleaner program." Prerun looks to be a software updater, that runs at startup. Just based on "GBTUpd" naming convention alone. Paul |
#3
|
|||
|
|||
Gigabyte SIV (App Center program)
Paul wrote:
Bill wrote: I have a new system on a Gigabyte GA-Z97X-UD5H board. I am having trouble configuring fan speed in a convenient way. It would be very helpful to have "documentation" for the various programs that come in the "SIV folder" (and some of their inter-dependencies--for example, what does "prerun.exe" do?). I would like to configure the program to run at startup (and am "floundering" with that so far). I have it controlling the fan speed acceptably, at start up, in my admin account, but not my user account, using the Windows7-Pro-64bit OS. It seemed to work better (i.e. without prompting me) after I reinstalled my Norton Security software "on top of it"--rather than the other way around. Is there a 64-bit version of the app center program? I think I could do a better job of this if I had more information. The one page in the user manual is not sufficient (the app center doesn't even run as described in the user manual--I cannot bring up the window shown on page 95 of the manual, for instance). Thank you for any assistance! Bill Did you check the BIOS Setup screens first ? Sometimes, you can set up the fans in there, and never need a Windows (or Linux) program for it. Look for "Fan Speed Percentage" around page 49 of the manual. Hi Paul, This is the same "Bill" you've assisted on another forum. I see the fan speed percentage. If I increase the percentage is it likely I could get it up to 1000 RPM at idle or so? I guess the question is whether the PWM value can be close to 0, because if so, then it would cause fan-"hiccup'ing" (which I've described to you before). I was assuming the answer to that was yes, which is why I didn't try it--but I may well be wrong. ******* For a free fan control program, there is Speedfan from almico.com. Maybe that will have better options than SIV. The program is for Windows. I guess I don't know how to use Speedfan to adjust my fan speeds. I AM using it to read my fan speeds. I don't think Speedfan knows my motherboard model, but I only have one fan I need manage (CPU_OPT). ******* If the SIV application is a Metro tile, it may not have the best behavior. Apparently, if you're not viewing the Tile window, the program can suspend itself (go to sleep) for later. http://stackoverflow.com/questions/1...up-a-metro-app I never heard of a "Metro app" before. Is that a Windows 8 concept? ******* "I disabled C:\ProgramFiles (x86)\Gigabyte\GBTUpd\PreRun.exe in the msconfig start menu using CCleaner program." Prerun looks to be a software updater, that runs at startup. Just based on "GBTUpd" naming convention alone. I think it may also help set up the AppCenter. I think without doing that, the thermald program doesn't appear able to do fan management, even if it's running. That's why I was asking about documentation-so I could try to do it right. Finding an alternative to the Gigabyte programs sounds like a fine idea, even if it costs a few dollars--the programs have irritated me enough. But I will accept some of the "blame" for trying to run Admin and User accounts properly. In the past, I just ran an Admin account, but I am trying to do "better" this time. If I was only running an admin account now, I wouldn't have any fan issues. Also, I woudn't learn anything new. Thank you for your kind help! Bill Paul |
#4
|
|||
|
|||
Gigabyte SIV (App Center program)
******* For a free fan control program, there is Speedfan from almico.com. Maybe that will have better options than SIV. The program is for Windows. I guess I don't know how to use Speedfan to adjust my fan speeds. I AM using it to read my fan speeds. I don't think Speedfan knows my motherboard model, but I only have one fan I need manage (CPU_OPT). I just registered at Speedfan's website. Maybe I am reading it wrong, as I didn't see configurations for any "1150" CPU motherboards. Mine is Gigabyte z97x-... I thought I would have seen something in that category? Bill |
#5
|
|||
|
|||
Gigabyte SIV (App Center program)
Bill wrote:
******* For a free fan control program, there is Speedfan from almico.com. Maybe that will have better options than SIV. The program is for Windows. I guess I don't know how to use Speedfan to adjust my fan speeds. I AM using it to read my fan speeds. I don't think Speedfan knows my motherboard model, but I only have one fan I need manage (CPU_OPT). I just registered at Speedfan's website. Maybe I am reading it wrong, as I didn't see configurations for any "1150" CPU motherboards. Mine is Gigabyte z97x-... I thought I would have seen something in that category? Bill I would guess the motherboard table is no longer updated. I can see a few sockets missing. I don't think you'll have trouble finding the settings, as there is a "Configure" button, a "Speeds" tab, and an "Advanced" tab. The Speeds one, allows setting Min and Max fan speed. The "Automatically Variated" enables fan speed control as near as I can tell. The "Advanced" is the hard part. For my chip, it lists several of the trade names for fan speed control methods, but the actual chip will only have one of those. So I don't know what to do with that one. But at least the "Speeds" one, you can try setting the minimum speed, tick the box, and see what happens. I'll have to go back and use Linux "sensors-detect", to see if the chip identification agrees with Speedfan. Speedfan sees two SuperI/O chips for some reason. And it's hard for me to verify Speedfan on this system, as there are no PWM fans installed in the case. My newer system has at least one PWM fan (which was running too slow, the first time I fired up the computer). I'd have to do my testing over there. Paul |
#6
|
|||
|
|||
Gigabyte SIV (App Center program)
Paul wrote:
I don't think you'll have trouble finding the settings, as there is a "Configure" button, a "Speeds" tab, and an "Advanced" tab. The Speeds one, allows setting Min and Max fan speed. The "Automatically Variated" enables fan speed control as near as I can tell. When I click Speeds, with or without "Automatic Fan Speed", I don't see anything in the panel. My CPU_FAN should run at 1850 all the time (which it is doing). And my CPU_OPT should control my radiator fans--which as you recalled, I would like to set to about 1000 RPM min. And it would be nice if the fan sped up when the CPU runs hot. Now that I'm registered, maybe Mr. Comparetti will try to assist me? Bill The "Advanced" is the hard part. For my chip, it lists several of the trade names for fan speed control methods, but the actual chip will only have one of those. So I don't know what to do with that one. But at least the "Speeds" one, you can try setting the minimum speed, tick the box, and see what happens. I'll have to go back and use Linux "sensors-detect", to see if the chip identification agrees with Speedfan. Speedfan sees two SuperI/O chips for some reason. And it's hard for me to verify Speedfan on this system, as there are no PWM fans installed in the case. My newer system has at least one PWM fan (which was running too slow, the first time I fired up the computer). I'd have to do my testing over there. Paul |
#7
|
|||
|
|||
Gigabyte SIV (App Center program)
Paul wrote:
Bill wrote: ******* For a free fan control program, there is Speedfan from almico.com. Maybe that will have better options than SIV. The program is for Windows. I guess I don't know how to use Speedfan to adjust my fan speeds. I AM using it to read my fan speeds. I don't think Speedfan knows my motherboard model, but I only have one fan I need manage (CPU_OPT). I just registered at Speedfan's website. Maybe I am reading it wrong, as I didn't see configurations for any "1150" CPU motherboards. Mine is Gigabyte z97x-... I thought I would have seen something in that category? Bill I would guess the motherboard table is no longer updated. I can see a few sockets missing. I don't think you'll have trouble finding the settings, as there is a "Configure" button, a "Speeds" tab, and an "Advanced" tab. The Speeds one, allows setting Min and Max fan speed. The "Automatically Variated" enables fan speed control as near as I can tell. The "Advanced" is the hard part. For my chip, it lists several of the trade names for fan speed control methods, but the actual chip will only have one of those. So I don't know what to do with that one. But at least the "Speeds" one, you can try setting the minimum speed, tick the box, and see what happens. I noticed that the newer version (4.51) of Speed Fan "fully-supported" my temperature sensor, so I installed it. BTW, it's getting harder and harder to locate software that is not embedded in bloatware! I believe I got a clean copy at Softpedia. I did see a few more options in the software. Nothing as clear as a "minimum speed setting". There is a "variated speed" setting, I think you mentioned that. Right now, my fan settings are set to "SmartGuardian"--so evidently I'm in good hands! BTW, I went back and looked at those percentages in the BIOS--and they were changes to PWM per degree-Celcius. So even when I advanced it "all the way up to 2", it still did not turn on the fan at start up. My computer is too warm for me to do any good debugging now. I found the Speed Fan "Help " folder too, and I read quite a bit of it (not enough yet). I have a "more annoying" software issue I will tell you about if I can't fix it in a few more days. I trust your computer is running like top! Cheers, Bill |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Program Amal express2u, program yg semakin hangat dan hebat | faizal | Printers | 0 | November 12th 08 01:58 AM |
ATI's Radeon TV-Out program Worst than nVIDIA TV-Out Program | Red Cloud | Ati Videocards | 0 | November 5th 07 06:15 AM |
Gigabyte Gigabyte NX7600GT does it come with a Din to component adaptor ? | Home Theatre Guy | Gigabyte Motherboards | 0 | October 21st 06 08:38 AM |
Gigabyte Gigabyte NX7600GT does it come with a Din to component adaptor ? | Home Theatre Guy | Nvidia Videocards | 0 | October 21st 06 08:37 AM |
"Out Of Memory error when trying to start a program or while program is running" | Dharmarajan.K | General Hardware | 0 | June 11th 04 10:42 PM |