If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help with the P4C800 Deluxe Motherboard and Standard IDE Setup.
I have purchased the Asus P4C800 Deluxe Motherboard and I have not
been about to get my mind around the setting up of the IDE ports. I am guessing that the IDE ports are ready to use by default but I am not sure. All that I want to do at this time is to connect my 2 hard drives and 2 CR-Rom drives to the Pri-IDE and the Sec-IDE ports so that I can do this rebuild. It wont matter if the SATA ports are active as well as long as it does not cause an error not having anything connected to them. I will be using Windows XP Home with this setup, I plan on doing major upgrades around October which will include an FX AGP card and SATA drives and a 17" TFT MONITOR, but I have not decided on which processor I will get, maybe the Prescott if they do release it for the Socket 478. Appreciate any help you can offer. Keith Holzapfel Checked by AVG anti-virus system (http://www.grisoft.com). Product Version: 6.0.502 Release Date: 26/02/2003 Virus Database: 300 Release Date: 18/07/2003 |
Thread Tools | |
Display Modes | |
|
|