A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Nvidia Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Ongoing problem



 
 
Thread Tools Display Modes
  #1  
Old July 31st 03, 12:27 AM
Moo
external usenet poster
 
Posts: n/a
Default Ongoing problem

I've had an on-going problem with my Geforce 2 mx 64.

The display is fine and runs well all except the bottom quarter of the
screen which is blurry, but only at 640x480 or 800x600, 1024x768 is fine
(the res I run windows in) but games like Vice City etc that run in 640x480
have a blurry bottom quarter.

It is annoying although I did manage to sort the problem using some older
drivers (I can't remember which drivers and have been unable to reproduce
the effect) obviously I want the advantages of using the latest drivers
though. It does seem strange that it only affects the bottom quarter of the
screen..

When taking a screen grab of 640x480 it appears fine in 1024x768. Could
this be a monitor problem? I didn't have any trouble with my banshee when I
had it with the same monitor (a taxan 975 tco99).

Any ideas?? My blurry radar is doing my head in!!!

Moo


  #2  
Old July 31st 03, 04:33 AM
neopolaris
external usenet poster
 
Posts: n/a
Default

Sounds like a monitor problem. When video cards go bad you see artifacts
and sparklies and if it's REAL bad you see nothing and the computer won't
start.

neopolaris
"Moo" wrote in message
...
Moo wrote:
I've had an on-going problem with my Geforce 2 mx 64.

The display is fine and runs well all except the bottom quarter of the
screen which is blurry, but only at 640x480 or 800x600, 1024x768 is
fine (the res I run windows in) but games like Vice City etc that run
in 640x480 have a blurry bottom quarter.

It is annoying although I did manage to sort the problem using some
older drivers (I can't remember which drivers and have been unable to
reproduce the effect) obviously I want the advantages of using the
latest drivers though. It does seem strange that it only affects the
bottom quarter of the screen..

When taking a screen grab of 640x480 it appears fine in 1024x768.
Could this be a monitor problem? I didn't have any trouble with my
banshee when I had it with the same monitor (a taxan 975 tco99).

Any ideas?? My blurry radar is doing my head in!!!

Moo


Forgot to say. using 44.03 which I just downloaded.. Had to reinstall
windows after a few problems..




  #3  
Old July 31st 03, 07:26 AM
Ron Merts
external usenet poster
 
Posts: n/a
Default

I agree, sounds like a monitor problem. I had something similar with an
Envision 17in monitor. The upper-left 1/3 of the screen was blurry at
resolutions over 800X600, but fine at 640X480 and so-so at 800X600. Since
this was a test monitor for bench work it was no big deal - until the
monitor finally expired.

Ron

"neopolaris" . wrote in message ...
Sounds like a monitor problem. When video cards go bad you see artifacts
and sparklies and if it's REAL bad you see nothing and the computer won't
start.

neopolaris
"Moo" wrote in message
...
Moo wrote:
I've had an on-going problem with my Geforce 2 mx 64.

The display is fine and runs well all except the bottom quarter of the
screen which is blurry, but only at 640x480 or 800x600, 1024x768 is
fine (the res I run windows in) but games like Vice City etc that run
in 640x480 have a blurry bottom quarter.

It is annoying although I did manage to sort the problem using some
older drivers (I can't remember which drivers and have been unable to
reproduce the effect) obviously I want the advantages of using the
latest drivers though. It does seem strange that it only affects the
bottom quarter of the screen..

When taking a screen grab of 640x480 it appears fine in 1024x768.
Could this be a monitor problem? I didn't have any trouble with my
banshee when I had it with the same monitor (a taxan 975 tco99).

Any ideas?? My blurry radar is doing my head in!!!

Moo


Forgot to say. using 44.03 which I just downloaded.. Had to reinstall
windows after a few problems..






  #4  
Old July 31st 03, 03:36 PM
Moo
external usenet poster
 
Posts: n/a
Default

Ron Merts wrote:
I agree, sounds like a monitor problem. I had something similar with
an Envision 17in monitor. The upper-left 1/3 of the screen was
blurry at resolutions over 800X600, but fine at 640X480 and so-so at
800X600. Since this was a test monitor for bench work it was no big
deal - until the monitor finally expired.

Ron


mumble.. top posters.. mumble

So what would this be then? A permanent hardware thing or a driver problem?
Remember I did manage to sort this problem out using one specific set of
drivers, but I can't remember which set of drivers it was...


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help needed with unidentified problem ^MisterJingo^ General 3 November 23rd 04 05:45 AM
ATI Radeon 8500 problem (or the ViewSonice A90f+ monitor problem)?? T.T. Ati Videocards 0 October 9th 04 07:19 PM
Mouse Problem Jeff Homebuilt PC's 0 October 1st 04 06:44 AM
not the same old B&W problem (I don't think) Brian Lee Ati Videocards 0 July 9th 04 01:15 AM
Freezing, lock up, unresponsive problem. James General 5 September 5th 03 02:54 PM


All times are GMT +1. The time now is 05:54 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.