|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
January 24th 04, 10:30 AM
|
|||
|
|||
What Memory for 8KNXP?
Hi,
Got my 8KNXP up and running, no real problems, except the 2 x 256 memory sticks, do not work, they are Elixir brand. Caused the PC to keep rebooting and other stuff, swapped them for an old 256, no brand, and everything works good. So what memory are we to buy that works ok? thanks al 
|
|
#2
January 24th 04, 03:32 PM
|
|||
|
|||
|
suzanne wrote in message . ..
Hi, Got my 8KNXP up and running, no real problems, except the 2 x 256 memory sticks, do not work, they are Elixir brand. Caused the PC to keep rebooting and other stuff, swapped them for an old 256, no brand, and everything works good. So what memory are we to buy that works ok? thanks al I have 2 x KVR400x64C3/256 Kingston DDR RAM with a P4 2.8C(800MHz) CPU. They run fine without any problems. (BIOS setting: DIMM Overvoltage +0.2V) Orhan
|
|
#3
January 24th 04, 05:07 PM
|
|||
|
|||
|
Are you overclocking your P4 2.8.
Have mine at 216, giving 3.04, stable, even with old memory al Got my 8KNXP up and running, no real problems, except the 2 x 256 memory sticks, do not work, they are Elixir brand. Caused the PC to keep rebooting and other stuff, swapped them for an old 256, no brand, and everything works good. So what memory are we to buy that works ok? thanks al I have 2 x KVR400x64C3/256 Kingston DDR RAM with a P4 2.8C(800MHz) CPU. They run fine without any problems. (BIOS setting: DIMM Overvoltage +0.2V) Orhan
|
|
#4
January 25th 04, 02:06 AM
|
|||
|
|||
|
"Orhan" wrote in message m... suzanne wrote in message . .. Hi, Got my 8KNXP up and running, no real problems, except the 2 x 256 memory sticks, do not work, they are Elixir brand. Caused the PC to keep rebooting and other stuff, swapped them for an old 256, no brand, and everything works good. So what memory are we to buy that works ok? thanks al I have 2 x KVR400x64C3/256 Kingston DDR RAM with a P4 2.8C(800MHz) CPU. They run fine without any problems. (BIOS setting: DIMM Overvoltage +0.2V) Ditto, except I have KVR40064C3AK2/1G x 2 (2 matched pairs of 512's, 2gb total). No problems.
|
|
#5
January 25th 04, 07:46 AM
|
|||
|
|||
|
suzanne wrote in message . ..
Are you overclocking your P4 2.8. Have mine at 216, giving 3.04, stable, even with old memory al Got my 8KNXP up and running, no real problems, except the 2 x 256 memory sticks, do not work, they are Elixir brand. Caused the PC to keep rebooting and other stuff, swapped them for an old 256, no brand, and everything works good. So what memory are we to buy that works ok? thanks al I have 2 x KVR400x64C3/256 Kingston DDR RAM with a P4 2.8C(800MHz) CPU. They run fine without any problems. (BIOS setting: DIMM Overvoltage +0.2V) Orhan No. I don't overclock my CPU. I think, the default setting for DIMM OverVoltage Control (Normal) is 2.5V. My memory sticks are labeled as 2.6V. After reading a post in this forum (Russell, 03 Oct 2003)I changed it to +0.2V (2.7V). Orhan
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| still got performance problems with P4P800-E and Prescott | Johnny | Asus Motherboards | 13 | December 2nd 04 03:48 PM |
| Asus A7N8X-X and AMD Athlon XP 3200+ | Information Scavenger | Asus Motherboards | 30 | November 9th 04 09:30 PM |
| I still don't completly understand FSB.... | legion | Homebuilt PC's | 7 | October 28th 04 03:20 AM |
| Tualatin in a GA-6WMMC7 | ~misfit~ | Overclocking | 33 | April 23rd 04 06:30 AM |
| Buying Kingston RAM chips... | Wald | General | 7 | December 6th 03 04:56 AM |
Linear Mode
