If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How to reinstall Dell Dimension 2400?
Hello,
I tried to reinstall WinXP on Dell Dimension 2400 from the original CD - WinXp is working but many drivers are missing - for example it uses generic drive for VGA and network card is not working. Owner of the PC have only one Dell resintall CD - she does not remember if other CD were included. My question: Do I need other CD to reinstall PC? Where can I find procedure how to reinstall it? This PC does not have floppy drive. There no empty bay for a floppy. If I want to add a floppy to this box - how to do it? Thanks, Zalek |
#2
|
|||
|
|||
How to reinstall Dell Dimension 2400?
I can't speak for your friend , but my 2400 came with os (reinstallation)
disc and 2 drivers and utilities discs. One was for modem and fax drivers, the other was for everything else Also came with 3 applications cds. for cd/dvd dell tools etc. "zalek" wrote in message ups.com... Hello, I tried to reinstall WinXP on Dell Dimension 2400 from the original CD - WinXp is working but many drivers are missing - for example it uses generic drive for VGA and network card is not working. Owner of the PC have only one Dell resintall CD - she does not remember if other CD were included. My question: Do I need other CD to reinstall PC? Where can I find procedure how to reinstall it? This PC does not have floppy drive. There no empty bay for a floppy. If I want to add a floppy to this box - how to do it? Thanks, Zalek |
#3
|
|||
|
|||
How to reinstall Dell Dimension 2400?
If all else fails and you can't find the necessary drivers CD, you can download
everything needed from the Dell web site. ALWAYS install the motherboard chipset drivers first, then graphics, video, audio in any order... Ben Myers On 9 Dec 2005 04:25:58 -0800, "zalek" wrote: Hello, I tried to reinstall WinXP on Dell Dimension 2400 from the original CD - WinXp is working but many drivers are missing - for example it uses generic drive for VGA and network card is not working. Owner of the PC have only one Dell resintall CD - she does not remember if other CD were included. My question: Do I need other CD to reinstall PC? Where can I find procedure how to reinstall it? This PC does not have floppy drive. There no empty bay for a floppy. If I want to add a floppy to this box - how to do it? Thanks, Zalek |
#4
|
|||
|
|||
How to reinstall Dell Dimension 2400?
The CD that came with your machine would be outdated anyway. Download'em.
As for the floppy, there is a spot for a floppy -- it is just covered up with a blank panel right now. The mounting kit is unique to this model, though, so call Dell and order one (around $30) if you really need it. Not sure it is worth it though. Tom ben_myers_spam_me_not @ charter.net (Ben Myers) wrote in message ... If all else fails and you can't find the necessary drivers CD, you can download everything needed from the Dell web site. ALWAYS install the motherboard chipset drivers first, then graphics, video, audio in any order... Ben Myers On 9 Dec 2005 04:25:58 -0800, "zalek" wrote: Hello, I tried to reinstall WinXP on Dell Dimension 2400 from the original CD - WinXp is working but many drivers are missing - for example it uses generic drive for VGA and network card is not working. Owner of the PC have only one Dell resintall CD - she does not remember if other CD were included. My question: Do I need other CD to reinstall PC? Where can I find procedure how to reinstall it? This PC does not have floppy drive. There no empty bay for a floppy. If I want to add a floppy to this box - how to do it? Thanks, Zalek |
#5
|
|||
|
|||
How to reinstall Dell Dimension 2400?
after installing windows xp from the cd you need to install drivers.
first and foremost you need to install the 'chipset' drivers. your machine came with a purple windows xp cd titled "operating system - already installed on your computer - reinstallation cd". this is probably what you used to get windows installed. you machine also came with two or more blue and white cds (depending on the option you ordered). one of these cds is titled "drivers and utilities - already installed on your computer - dell dimension resource cd". this one has the chipset, video, sound drives. the other blue and white cds include such things as the modem driver, cd recording software, dvd playback software, antivirus software, etc. if you are missing these blue and white cds then you can download the drivers from support.dell.com. however you can not get the cd recording software or dvd playback software. as for the floppy, you could get an external usb floppy drive from any vendor, or you could get the floppy kit from dell that includes the drive, the bracket for mounting inside of the system, and the data cable to connect it to the motherboard. alternatively, you could get a usb 'key', or 'thumb drive' that you stick into the usb port on the front of the machine and treat as a floppy drive. it easily moves from machine to machine like a floppy is much higher capacity and more reliable. "zalek" wrote in message ups.com... Hello, I tried to reinstall WinXP on Dell Dimension 2400 from the original CD - WinXp is working but many drivers are missing - for example it uses generic drive for VGA and network card is not working. Owner of the PC have only one Dell resintall CD - she does not remember if other CD were included. My question: Do I need other CD to reinstall PC? Where can I find procedure how to reinstall it? This PC does not have floppy drive. There no empty bay for a floppy. If I want to add a floppy to this box - how to do it? Thanks, Zalek |
#6
|
|||
|
|||
How to reinstall Dell Dimension 2400?
As for the floppy, there is a spot for a floppy -- it is just covered up
with a blank panel right now. The mounting kit is unique to this model, though, so call Dell and order one (around $30) if you really need it. And you may notice a stand-along USB floppy drive is probably cheaper overall... -- Please add the word "newsgroup" in the subject line of personal emails **** My email address includes "ngspamtrap" and " **** |
#7
|
|||
|
|||
How to reinstall Dell Dimension 2400?
And you may notice a stand-along USB floppy drive is probably cheaper
overall... Damn typos - i`m dog tired :-} -- Please add the word "newsgroup" in the subject line of personal emails **** My email address includes "ngspamtrap" and " **** |
#8
|
|||
|
|||
How to reinstall Dell Dimension 2400?
The 2400 I have has an option to restore the PC to the original
configuration when I received it. This is all of the drivers, OS, apps., etc. that were on the machine when new. When you boot the PC you will see a blue bar with www.dell.com , when that appears, hit ctrl F11 . This is why I was told I did not need any OS cd's etc. Bob "zalek" wrote in message ups.com... Hello, I tried to reinstall WinXP on Dell Dimension 2400 from the original CD - WinXp is working but many drivers are missing - for example it uses generic drive for VGA and network card is not working. Owner of the PC have only one Dell resintall CD - she does not remember if other CD were included. My question: Do I need other CD to reinstall PC? Where can I find procedure how to reinstall it? This PC does not have floppy drive. There no empty bay for a floppy. If I want to add a floppy to this box - how to do it? Thanks, Zalek |
#9
|
|||
|
|||
How to reinstall Dell Dimension 2400?
Depends on when you got it. I believe that option came into play around
June 2004. My 2400, from March 2004, doesn't have it. "Leanin' Cedar" wrote in message k.net... The 2400 I have has an option to restore the PC to the original configuration when I received it. This is all of the drivers, OS, apps., etc. that were on the machine when new. When you boot the PC you will see a blue bar with www.dell.com , when that appears, hit ctrl F11 . This is why I was told I did not need any OS cd's etc. Bob "zalek" wrote in message ups.com... Hello, I tried to reinstall WinXP on Dell Dimension 2400 from the original CD - WinXp is working but many drivers are missing - for example it uses generic drive for VGA and network card is not working. Owner of the PC have only one Dell resintall CD - she does not remember if other CD were included. My question: Do I need other CD to reinstall PC? Where can I find procedure how to reinstall it? This PC does not have floppy drive. There no empty bay for a floppy. If I want to add a floppy to this box - how to do it? Thanks, Zalek |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dell's Sorry History of Microphone/Soundcard Issue (Update) | Class_Action | General | 127 | January 20th 06 09:30 PM |
Dell's Sorry History of Microphone/Soundcard Issue (Update) | Class_Action | Dell Computers | 121 | December 12th 05 12:47 PM |
Dell Dimension 2400 -- Won't Power On | Eric Chevalier | Dell Computers | 3 | July 24th 05 04:35 PM |
Our Dell experience said never again | Rey Barry | Dell Computers | 50 | February 28th 04 10:44 PM |
How to Install a PCI Video Card in a Dell Dimension 2400 | Tim | Dell Computers | 2 | February 9th 04 03:10 AM |