If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Gigabyte GA-7n400 Pro 2 Rev2 won't recognise keyboard and gives no error
I have a Gigabyte GA-7n400 Pro 2 Rev. 2 and decided to put some more memory in it. I installed 2 x 512mb sitcks into slots 3 & 4 but on boot up this was not being recognised and Dual DDR was no longer being enabled. I removed the new memory sticks and went back to my old configuration and now the keyboard is not being recognised on boot up and when it gets to the page where Windows XP should load I get a series of beeps and a black screen! I've tried running it barebones and still the same! I'm using Elixir DDR400 memory, 120GB Maxtor HD, NVidia MX440 128MB graphics card and a DVD ROM. It was working perfectly before the memory install (though I did have intial teething problems with IDE 1 which an upgrade of bios cured) and was also running on a RAID 0 Array. I have tried everything and even a USB keyboard but because I disabled USB keyboard support in the BIOS and I can't get back into it I'm stumped! I'd appreciate some help or advice if possible! :-) I also have a GA-7VAX-A which is giving me an NTLDR error on boot up and that's not recognising the keyboard for me to get into the BIOS either! -- Netty |
Thread Tools | |
Display Modes | |
|
|