If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Troubles with Nero 5.5.6.4 and Multisession Cd
Hi I have troubles with Nero 5.5.6.4 and writing Multisession Cd.
I insert on my CD-Writer/Rewriter a Cd-r 80 Min (700Mb) as Target and a Cd-Rw on my Dvd-Rom as Source (The Cd-rw contains about 500 Mb of Data). I open Nero and I select Make Multisession Cd : i follow carefully the help on line and the Cd is wrote with Success. I can read it with my dvd-rom and my cd-rewriter. Now I open Nero And I want to add data to the Cd (I remember that I have created a multisession Cd NOT CLOSED) then I have Problmes : I select Continue a Multisession Cd, Nero displays a window with the session present on the Cd I click on the OK button And After I clicked the following error is displayed: "Error reading Cd: pheraps the cd is damaged" Now I have tryed to do this operation on two Cd-r of the same type and I have the same error above described: but I say: 1 can be damaged but 2 cd-rs is very difficult ! Then I think that there is some problem with my cd rewriter or Nero. I have updated the Firmware of my cd rewriter but it doesn't resolve my problems. I give my configuration: Cd-rewriter : TEAC CDW524E 40X/24X/10X BurnProof and My Dvd is Samsung Dvd-Rom SD616. MotherBoard = Asus A7V266-E with chipset VIA KT266-A; processor: AMD ATHLON XP 1800 - Hard Disk Maxtor U-ATA 133 7.2 Rpm 512 Mb ddr. OS: Windows Xp with SP1. What's wrong ? I must update Nero ? Thanks Roberto. |
Thread Tools | |
Display Modes | |
|
|