If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
cool&quiet and OC
Does c&q work after OC on A8N Premium. Please post here if somebody can set
c&q to work after overclocking the BUS for example to 250 MHz with multiplier. I heard that c&q doesn't work when VID is set in the BIOS manually. I have Athlon64 3000+ and I'd like to set BUS to 266MHz and use c&q. Please tell me what s maimal VID value and BUS speed. Thx. |
#2
|
|||
|
|||
cool&quiet and OC
Figo skrev:
Does c&q work after OC on A8N Premium. Please post here if somebody can set c&q to work after overclocking the BUS for example to 250 MHz with multiplier. I heard that c&q doesn't work when VID is set in the BIOS manually. I have Athlon64 3000+ and I'd like to set BUS to 266MHz and use c&q. Please tell me what s maimal VID value and BUS speed. Thx. hi got an a8n-sli premium and have tested oc with success. c&q do work fine on bios 1009. i used clockgen to raise htt, c&q will work but it don't slow htt down, just lower cpu mult. (good) i have not changed vid (auto) just set pci sync. to 33mhz minimal settings for vid and htt? don't know but htt can be way under 200 (normal) and vid is depending on the installed core. (130nm 1.4-1.5v and 90nm 1.3-1.35v) coco |
#3
|
|||
|
|||
cool&quiet and OC
How about RightMark ClockUtility does somebody know how to set up.
|
#4
|
|||
|
|||
cool&quiet and OC
Does htt was 266Mhz?
|
Thread Tools | |
Display Modes | |
|
|