If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Nero 6 bug
In Nero Burning Rom, if I click on "File", I get a dialog box that says "Internal Error", followed by a "Instruction at blah blah at memory location blah blah." Anyone else seeing this? I tried it both as an upgrade install (over the top of 5.5) and as a clean install (after removing 5.5). I made a disk image before installing which allowed me to try it both ways. Windows 2000 SP 4 P4 2.53 on Intel 845G chipset board. Plextor PX-W4824A P.S. I was one of the people that purchased Nero 5.5 after May 1st, so I was eligible for a free upgrade to 6. When I used the registration code they sent via e-mail, the program title changed from "Nero Demo" to "Nero OEM". Why would it say OEM since I purchased the full retail version direct from Ahead? |
#2
|
|||
|
|||
I upgraded after May 1 from a bundled Nero that came with my Yamaha burner
so that it would work with my new DVD burner. I too qualified for the free upgrade and mine also says Nero OEM. Puzzled me too but all seems to function OK. Chuck "Folk" wrote in message news In Nero Burning Rom, if I click on "File", I get a dialog box that says "Internal Error", followed by a "Instruction at blah blah at memory location blah blah." Anyone else seeing this? I tried it both as an upgrade install (over the top of 5.5) and as a clean install (after removing 5.5). I made a disk image before installing which allowed me to try it both ways. Windows 2000 SP 4 P4 2.53 on Intel 845G chipset board. Plextor PX-W4824A P.S. I was one of the people that purchased Nero 5.5 after May 1st, so I was eligible for a free upgrade to 6. When I used the registration code they sent via e-mail, the program title changed from "Nero Demo" to "Nero OEM". Why would it say OEM since I purchased the full retail version direct from Ahead? |
#3
|
|||
|
|||
I downloaded Nero 6 Demo & Nero Vision Express 2 (I have been running an OEM
version of Nero 5.5), I am running Directx 9.0b and also cannot launch NeroVision Express 2! Maybe a problem with DirectX 9.0b?? I am Running Windows 2000 Pro SP4. Regards Vergs. "Nevada Jack" wrote in message news:HckVa.28935$Ne.6274@fed1read03... I have no problem with Nero Burning ROM. Do not receive any error message when clicking on File Menu. Also, I also purchased 5.5 Serial # after May 1 and received 6.0 number. Installed new serial # and changed from Demo to just 6.0.0.9....that is strange you would receive an OEM. BTW...have you downloaded DX9.0b from MS WIN Update? If so, are you having any problem opening Nero Vision Express 2 application or individual DVD authoring tasks in Smart Start? I am getting an error messsage..."you need DX9.0 or higher to run this application." and none of the Vision Express function including the app will not open. Jack "Folk" wrote in message news In Nero Burning Rom, if I click on "File", I get a dialog box that says "Internal Error", followed by a "Instruction at blah blah at memory location blah blah." Anyone else seeing this? I tried it both as an upgrade install (over the top of 5.5) and as a clean install (after removing 5.5). I made a disk image before installing which allowed me to try it both ways. Windows 2000 SP 4 P4 2.53 on Intel 845G chipset board. Plextor PX-W4824A P.S. I was one of the people that purchased Nero 5.5 after May 1st, so I was eligible for a free upgrade to 6. When I used the registration code they sent via e-mail, the program title changed from "Nero Demo" to "Nero OEM". Why would it say OEM since I purchased the full retail version direct from Ahead? |
#4
|
|||
|
|||
I am running DirectX 9.0b and NeroVision Express 2 launches and I have
burned successfully previous captures to VCD. I had downloaded Express 2 about two weeks ago at the same time as I went from my Yamaha bundled version to a full license that would work with my DVD burner. Windows XP Home SP1. Chuck "vergs" wrote in message ... I downloaded Nero 6 Demo & Nero Vision Express 2 (I have been running an OEM version of Nero 5.5), I am running Directx 9.0b and also cannot launch NeroVision Express 2! Maybe a problem with DirectX 9.0b?? I am Running Windows 2000 Pro SP4. Regards Vergs. "Nevada Jack" wrote in message news:HckVa.28935$Ne.6274@fed1read03... I have no problem with Nero Burning ROM. Do not receive any error message when clicking on File Menu. Also, I also purchased 5.5 Serial # after May 1 and received 6.0 number. Installed new serial # and changed from Demo to just 6.0.0.9....that is strange you would receive an OEM. BTW...have you downloaded DX9.0b from MS WIN Update? If so, are you having any problem opening Nero Vision Express 2 application or individual DVD authoring tasks in Smart Start? I am getting an error messsage..."you need DX9.0 or higher to run this application." and none of the Vision Express function including the app will not open. Jack "Folk" wrote in message news In Nero Burning Rom, if I click on "File", I get a dialog box that says "Internal Error", followed by a "Instruction at blah blah at memory location blah blah." Anyone else seeing this? I tried it both as an upgrade install (over the top of 5.5) and as a clean install (after removing 5.5). I made a disk image before installing which allowed me to try it both ways. Windows 2000 SP 4 P4 2.53 on Intel 845G chipset board. Plextor PX-W4824A P.S. I was one of the people that purchased Nero 5.5 after May 1st, so I was eligible for a free upgrade to 6. When I used the registration code they sent via e-mail, the program title changed from "Nero Demo" to "Nero OEM". Why would it say OEM since I purchased the full retail version direct from Ahead? |
#5
|
|||
|
|||
"vergs" wrote in message ... I downloaded Nero 6 Demo & Nero Vision Express 2 (I have been running an OEM version of Nero 5.5), I am running Directx 9.0b and also cannot launch NeroVision Express 2! Maybe a problem with DirectX 9.0b?? I am Running Windows 2000 Pro SP4. I'm running Direct X 9.0 (4.09) and cannot even install NeroVision 2 as it says I need to have Direct X 9 installed ?? Rest of Nero working fine |
#6
|
|||
|
|||
Ahead Tech Support in California says there is no issue with DX9.x since
they ran it on two of their machines and the tech ran it on his home computer. I have sent them the enrtries from this group indicating my problem is not unique. I have asked them to at least send me some files that I should look for or someway to find out why NVE2.0 does not see DX9 files. Will post on this group when I hear from them again. I suggest you sent your problem to Nero Support so they see it is not a single system. Jack "feronni" wrote in message ... "vergs" wrote in message ... I downloaded Nero 6 Demo & Nero Vision Express 2 (I have been running an OEM version of Nero 5.5), I am running Directx 9.0b and also cannot launch NeroVision Express 2! Maybe a problem with DirectX 9.0b?? I am Running Windows 2000 Pro SP4. I'm running Direct X 9.0 (4.09) and cannot even install NeroVision 2 as it says I need to have Direct X 9 installed ?? Rest of Nero working fine |
#7
|
|||
|
|||
On Fri, 1 Aug 2003 12:21:28 +0000 (UTC), Powderpuff Boys
wrote: I thought you were one of the unfortunate guys who got their hard disks wiped by Nero 6 (http://www.cdfreaks.com/news/7638). Think about this - if you try: C:\ del *.* on a live system the first thing that's going to happen is a load of error messages when it tries to deete command.com etc from the root; a problem for those who keep important stuff in the root of course. |
#8
|
|||
|
|||
Folk wrote in message . ..
In Nero Burning Rom, if I click on "File", I get a dialog box that says "Internal Error", followed by a "Instruction at blah blah at memory location blah blah." Anyone else seeing this? I have the same problem on my Windows XP SP2 install. Everything went fine from the installation, then I got the same internal error. This was the first time Nero had been installed on this machine. Does anyone know what's causing this? Thanks, Jeff |
#9
|
|||
|
|||
"feronni" wrote in message ...
"Jeff Davis" wrote in message om... Folk wrote in message . .. I have the same problem on my Windows XP SP2 install. XP SP2 isn't out until late 2004 typo. I installed an older 5.x.x.x version of Nero and had no problems. |
#10
|
|||
|
|||
I've had this bug since installing Nero 6 as soon as it was available.
It only happens on my Sony Vaio Laptop (GRX415MP), Windows XP, SP1. Just click the "file" menu and bang... "Internal Error". I reported it to Ahead, but not heard ANYTHING since there email saying their website was being revamped. J. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Yamaha CR3200S Fails Nero CD-DVD Speed Test- Error No Seek Complete (030200) | devilboy | General | 3 | November 30th 04 12:22 AM |
Nero 6.0 and Nero Vision | Nevada Jack | Cdr | 2 | July 30th 03 05:17 PM |
nero would only start in nero express... | mark24951 | Cdr | 1 | July 29th 03 04:45 AM |
Nero 5.5.10.42 weirdness | John Smith | Cdr | 0 | July 25th 03 10:17 PM |
Digital Research 48x16x48 not recognized by Nero 5.5 | Blackie Lawless | Cdr | 0 | July 16th 03 01:58 PM |