If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
TV-Out with FX5200 on Acer 1363WLMi
(la traduction fran=E7aise suit)
Hi all, I have a Acer Notebook, a 1363WLMi ( http://global.acer.com/products/notebook/as1360.htm ) with a GeForce FX5200 graphical card. When I try to connect my laptop using any of the S-VHS or the Composite connections, I get a poor quality image with white stripes scrolling on the screen. My television is a Sony 21''. But I noticed that when I unplug the AC adapter from the notebook, picture becomes clean (very clean). And when I plug it again, picture becomes poor again. I'm living in Belgium so, electrivity comes with 220V in the AC adapter. Anyone knows what's the problem ? Is there a solution to keep the notebook connected to AC adapter and to television at same time without this problem ? Thanks a lot, David Di Fabio --------------------------------------------------------------------------- Bonjour tout le monde, Voil=E0, j'ai un portable Acer 1363WLMi ( http://global.acer.com/products/notebook/as1360.htm ) avec une carte graphique GeForce FX5200. Quand j'essaye de le connecter =E0 la t=E9l=E9vision, la qualit=E9 de l'image est vraiment mauvaise, avec des bandes plus claires qui d=E9filents sur l'=E9cran. J'ai une t=E9l=E9vision Sony 54cm. J'ai remarqu=E9 que quand j'enl=E8ve le transfo du portable, l'image devient nette. (tr=E8s nette). Et quand je le rebranche, l'image redevient mauvaise. Quelqu'un a une id=E9e sur le probl=E8me ? Y'a t'il une solution pour garder le portable connect=E9 =E0 la prise d'=E9lectricit=E9 et =E0 la t=E9l=E9 en m=EAme temps sans avoir ce probl=E8= me ? Merci beaucoup, David Di Fabio |
#2
|
|||
|
|||
'popodom' wrote, in part:
| When I try to connect my laptop using any of the S-VHS or the | Composite connections, I get a poor quality image with white stripes | scrolling on the screen. My television is a Sony 21''. _____ Is the television PAL (or SECAM)? Is the display adapter set to output PAL (or SECAM) also? I do not know why connection to the laptop power supply should make the difference you describe, but the description does seem similar to how an NTSC signal might display on a PAL (or SECAM) television. If the output signal is the correct standard for the television, then the problem could be bad filtering in the power supply. If possible, try using the AC male plug without a ground connection. Phil Weldon "popodom" wrote in message oups.com... |
#3
|
|||
|
|||
It is a PAL television. And the settings are set to PAL-B... for
Belgium. So, the settings are good. If the output signal is the correct standard for the television, then the problem could be bad filtering in the power supply. If possible, try usi= ng the AC male plug without a ground connection. What do you mean exactly with 'AC male plus without ground connection' ? Sorry, I'm not an expert ! And thanks for your response ! David Phil Weldon a =E9crit : 'popodom' wrote, in part: | When I try to connect my laptop using any of the S-VHS or the | Composite connections, I get a poor quality image with white stripes | scrolling on the screen. My television is a Sony 21''. _____ Is the television PAL (or SECAM)? Is the display adapter set to output P= AL (or SECAM) also? I do not know why connection to the laptop power supply should make the difference you describe, but the description does seem similar to how an NTSC signal might display on a PAL (or SECAM) television. If the output signal is the correct standard for the television, then the problem could be bad filtering in the power supply. If possible, try usi= ng the AC male plug without a ground connection. Phil Weldon "popodom" wrote in message oups.com... |
#4
|
|||
|
|||
Ok, I get it...
I tried it and it worked !!! Thanks a lot for your help. David ----------------------------- Bon, ben, le probl=E8me est r=E9solu. Il semblerait que la prise de terre pose probl=E8me. Il suffit de brancher le transfo sur une prise sans terre et =E7a marche ! Une prise sans terre, c'est une prise =E0 2 broches et non 3 broches. Bien =E0 vous ! David |
#5
|
|||
|
|||
'popodom' wrote:
| Ok, I get it... | I tried it and it worked !!! | | Thanks a lot for your help. _____ I am happy the suggestion worked. I am not completely familiar with European AC plugs, so I could not be more specific with the description without looking up the shapes. In the USA the AC plugs have two flat blades (HOT and NEUTRAL) and one round pin (GROUND.) The two flat blades are HOT and NEUTRAL because the AC wiring is 120 volts in the wall, but 240 volts to the house, three wires (HOT NEUTRAL HOT), with 120 volts between each HOT leg and NEUTRAL. In Europe the connectors are various, with two HOT and one GROUND (EARTH.) In both specifications the GROUND (EARTH) connection is for safety; it is connected to any metalic chassis so that a fault that delivers current to the chassis will short to GROUND (EARTH) and cause a fuse to blow or circuit breaker to trip. What you were seeing on the screen was the result of a 'ground loop', a small AC current (50 Hz in Europe) on the TV signal caused by a a small potential difference between the laptop power supply groundn (earth) and the TV ground (earth.) The diagonal stripes were the 'beat note' between the approximate 50 Hz of the power line and the very slightly less than 50 Hz of the TV field rate. Lifting the ground (earth) connection at the laptop power supply allows the laptop/power supply to 'float' to the same potential as the TV. I guess the problem could also be the TV power supply or ground (earth). It might be a good idea to get the TV checked for proper grounding and operation, just for safety, and to avoid damage to your laptop. Phil Weldon "popodom" wrote in message oups.com... Ok, I get it... I tried it and it worked !!! Thanks a lot for your help. David ----------------------------- Bon, ben, le problème est résolu. Il semblerait que la prise de terre pose problème. Il suffit de brancher le transfo sur une prise sans terre et ça marche ! Une prise sans terre, c'est une prise à 2 broches et non 3 broches. Bien à vous ! David |
#6
|
|||
|
|||
Thank you for all you advices...
David |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ACER News | [email protected] | Acer Computers | 4 | January 22nd 08 03:51 PM |
FX5200 Problem | khurram-s | Nvidia Videocards | 2 | August 1st 05 04:16 AM |
Brand new Acer Aspire 1363WLMi hangs | David Plowman | Acer Computers | 0 | March 7th 05 09:31 PM |
warnign about geforce fx5200 128MB | Augustus | Nvidia Videocards | 5 | June 24th 04 12:05 AM |
P3 450 & FX5200?? | Dodge Tom | Nvidia Videocards | 8 | May 20th 04 08:10 PM |