GA-7400 Pro2 Rev 2 (BIOS FK) CAS Settings

Looking for a way to adjust the CAS settings of my memory -- DDR-400
PC3200 1024MB chips from PowerMemory (PQI) which POST confirms is DDR
Dual Channel Enabled. From the menu within BIOS I can set the frequency
manual but at percentages. However, I don't know what affect this would
have on the CAS settings if anything. According to memtest the memory
CAS settings are 2.5-4-4-8 when set to SPD within BIOS.

I want to adjust to determine if the memory settings are causing some of
instability problems when I adjust my CPU settings.....

Any thoughts would be appreciated.

"t mccool" wrote in message
...
Looking for a way to adjust the CAS settings of my memory -- DDR-400
PC3200 1024MB chips from PowerMemory (PQI) which POST confirms is DDR Dual
Channel Enabled. From the menu within BIOS I can set the frequency manual
but at percentages. However, I don't know what affect this would have on
the CAS settings if anything. According to memtest the memory CAS settings
are 2.5-4-4-8 when set to SPD within BIOS.

I want to adjust to determine if the memory settings are causing some of
instability problems when I adjust my CPU settings.....

Any thoughts would be appreciated.

Using CTL-F1 will allow you set up the memory manually.

JPS

t mccool wrote in news:u-OdnepzwP3Cn1XfRVn-
:

Looking for a way to adjust the CAS settings of my memory -- DDR-400
PC3200 1024MB chips from PowerMemory (PQI) which POST confirms is DDR
Dual Channel Enabled. From the menu within BIOS I can set the frequency
manual but at percentages. However, I don't know what affect this would
have on the CAS settings if anything. According to memtest the memory
CAS settings are 2.5-4-4-8 when set to SPD within BIOS.

I want to adjust to determine if the memory settings are causing some of
instability problems when I adjust my CPU settings.....

Any thoughts would be appreciated.

huh i thought it would only run 1 gig chips in pc2700 or under??