If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Recommend data recovery company?
Good day.
Got a 15 years old WD IDE hard drive, that was showing ZERO problems in SMART data, suddenly can no longer calibrate (i.e. it can't read anymore.) NOW the SMART data is showing something's wrong. Hard drive "clicks" (heads go back and forth full disk) then quits trying. Have another of the same model, but hesitant moving the platters myself; apparently platters are not really "stuck" together and I could mis-align them (rotate them in relation to each other) rendering the whole thing un-readable. Was planning to move the data off but kept delaying since it showed no sign of problems... Now need a data recovery company; anyone have good experience with one and can recommend? I'm also curious about how they recover drives if not by using another of the same model (where they hell how they going to find one as old as mine, and can they really keep one of each model of ALL drives?) If you can enlighten me on that too, would be great. Thank you. Best Regards, -- ! _\|/_ Sylvain / ! (o o) Memberavid-Suzuki-Fdn/EFF/Red+Cross/SPCA/Planetary-Society oO-( )-Oo "Live Long And Suffer" -Ancient Vulcan Curse. |
#2
|
|||
|
|||
Recommend data recovery company?
In article , B00ze
wrote: Got a 15 years old WD IDE hard drive, that was showing ZERO problems in SMART data, suddenly can no longer calibrate (i.e. it can't read anymore.) NOW the SMART data is showing something's wrong. what specifically is smart showing? do you have more than a pass/fail? Hard drive "clicks" (heads go back and forth full disk) then quits trying. Have another of the same model, but hesitant moving the platters myself; apparently platters are not really "stuck" together and I could mis-align them (rotate them in relation to each other) rendering the whole thing un-readable. swapping controllers (which is what i assume you mean by moving platters) won't make a difference and risks making things worse. Was planning to move the data off but kept delaying since it showed no sign of problems... all drives fail. the question is when. 15 years is *much* longer than normal. consider yourself lucky it lasted that long. you were on borrowed time. unfortunately, your luck ran out, and without a backup, you're in the situation you're in. Now need a data recovery company; anyone have good experience with one and can recommend? without question, drive savers: https://www.drivesaversdatarecovery.com they aren't cheap (none of the good ones are), but if for some reason they can't recover the drive (possible, but highly unlikely), you don't pay anything. a clicking drive is relatively easy compared to a computer melting in a fire or being under water for a couple of days: https://www.drivesaversdatarecovery....-bizarre-disk- asters/ I'm also curious about how they recover drives if not by using another of the same model (where they hell how they going to find one as old as mine, and can they really keep one of each model of ALL drives?) If you can enlighten me on that too, would be great. they don't need one for each model drive and the controller isn't what usually fails. |
#3
|
|||
|
|||
Recommend data recovery company?
B00ze wrote:
Good day. Got a 15 years old WD IDE hard drive, that was showing ZERO problems in SMART data, suddenly can no longer calibrate (i.e. it can't read anymore.) NOW the SMART data is showing something's wrong. Hard drive "clicks" (heads go back and forth full disk) then quits trying. Have another of the same model, but hesitant moving the platters myself; apparently platters are not really "stuck" together and I could mis-align them (rotate them in relation to each other) rendering the whole thing un-readable. Was planning to move the data off but kept delaying since it showed no sign of problems... Now need a data recovery company; anyone have good experience with one and can recommend? I'm also curious about how they recover drives if not by using another of the same model (where they hell how they going to find one as old as mine, and can they really keep one of each model of ALL drives?) If you can enlighten me on that too, would be great. Thank you. Best Regards, The big-name companies are listed here. https://support.wdc.com/warranty/dat...ericas&lang=en ******* And you can find sites with chit-chat about recovery. https://www.data-medics.com/forum/wd...re58-t746.html And there is gear people hint at, but don't describe in detail. I even found a site in India, selling things like "head stack holders" for when you change out a head stack. If you want to get into the business, there's always someone selling the bits and pieces needed. http://www.acelaboratory.com/pc3000.udma.php One interesting tidbit, is there is a three wire TTL level serial port on the controller board. Which accepts a cryptic language of some sort (parameter list, comma separated), There is at least one web page, which describes temporarily interrupting some electrical connections on a drive, issuing a couple commands into that serial port, and actually recovering a drive where the firmware has damaged a data structure stored in the Service Area. That was the first hint I got, that a hard drive has an interface like some home routers do. And it's not a port that responds to "help" either :-) ******* An industry practice seems to be "no charge unless I recover your data". You'd probably have to pay for shipping in cases where you want the carcass back, if they fail at the task. I've never used data recovery myself, so have not gone through the selection process of picking a repair/recovery facility. My phone book has three entries, claiming to be local service, but my guess is they just mail your drive to a larger facility somewhere. The listing for Florida, had maybe 30-40 providers. That's a lot of basements, with glove boxes in them... They should really be using a Class 100 or Class 10 Clean Room or Air Curtain for this work. But there are also glove boxes with HEPA air supplies, for doing the work. I think you could only get away with sloppy cleanliness, on the old drives (the ones with 10u flying height). And I think it'll be interesting, when someone asks this question, and he has a Helium drive. Who can handle one of those ? That will take a rocket scientist, as the HDA has a seal to keep the Helium in. What a mess that's going to be. Do they use a can opener on those ? :-) Conventional air-filled drives with breather holes, are a lot easier to open up (the breather hole has a HEPA filter underneath the cover). There is no "vacuum" inside a hard drive, as the heads actually "fly" on a cushion of some gas, whether it's 1 ATM air, or it's helium. Paul |
#4
|
|||
|
|||
Recommend data recovery company?
In article , Paul
wrote: And I think it'll be interesting, when someone asks this question, and he has a Helium drive. Who can handle one of those ? That will take a rocket scientist, as the HDA has a seal to keep the Helium in. What a mess that's going to be. it won't be a mess at all nor will it take a rocket scientist. drivesavers has been able to recover helium drives for nearly four years, only about one year after helium drives were first introduced. https://www.drivesaversdatarecovery....avers-data-rec overy-services-now-available-for-helium-hard-disk-drives/ NOVATO, Calif. * August 28, 2014** DriveSavers, the worldwide leader in*data recovery,*eDiscovery*and*digital forensic solutions, announced today data recovery services for helium-filled hard disk drives (HDD) are now available. DriveSavers Data Recovery experts are available 24/7 to help users recover files from drives should data loss occur while utilizing this recent technological development. they also can recover failed ssds, which is a *lot* more difficult than spinning rust. |
#5
|
|||
|
|||
Recommend data recovery company?
nospam wrote:
In article , Paul wrote: And I think it'll be interesting, when someone asks this question, and he has a Helium drive. Who can handle one of those ? That will take a rocket scientist, as the HDA has a seal to keep the Helium in. What a mess that's going to be. it won't be a mess at all nor will it take a rocket scientist. drivesavers has been able to recover helium drives for nearly four years, only about one year after helium drives were first introduced. https://www.drivesaversdatarecovery....avers-data-rec overy-services-now-available-for-helium-hard-disk-drives/ NOVATO, Calif. Â* August 28, 2014Â*Â* DriveSavers, the worldwide leader inÂ*data recovery,Â*eDiscoveryÂ*andÂ*digital forensic solutions, announced today data recovery services for helium-filled hard disk drives (HDD) are now available. DriveSavers Data Recovery experts are available 24/7 to help users recover files from drives should data loss occur while utilizing this recent technological development. they also can recover failed ssds, which is a *lot* more difficult than spinning rust. One last effort? Place drive in zip lock bag overnight in freezer. Quickly attach to PC and try to transfer files. -- Zaidy036 |
#6
|
|||
|
|||
Recommend data recovery company?
In article , Zaidy036
wrote: One last effort? Place drive in zip lock bag overnight in freezer. Quickly attach to PC and try to transfer files. do *not* even think about doing that if the data is at all valuable. |
#7
|
|||
|
|||
Recommend data recovery company?
Zaidy036 wrote:
One last effort? Place drive in zip lock bag overnight in freezer. Quickly attach to PC and try to transfer files. Believe or not I have done that and is sometimes works. -- Take care, Jonathan ------------------- LITTLE WORKS STUDIO http://www.LittleWorksStudio.com |
#8
|
|||
|
|||
Recommend data recovery company?
On 4/21/2018 8:15 AM, Jonathan N. Little wrote:
Zaidy036 wrote: One last effort? Place drive in zip lock bag overnight in freezer. Quickly attach to PC and try to transfer files. Believe or not I have done that and is sometimes works. I too have had luck doing that. And, I told a friend who told some other clients and they all seemed to have success. I think I might try a USB to IDE adapter and put the whole thing in a plastic bag in the fridge to see if that works. Then graduate to the freezer if necessary. |
#9
|
|||
|
|||
Recommend data recovery company?
In article , Jonathan N. Little
wrote: Place drive in zip lock bag overnight in freezer. Quickly attach to PC and try to transfer files. Believe or not I have done that and is sometimes works. more often, it makes it worse. you were lucky. it's a *very* bad idea for all sorts of reasons. ask the drive recovery companies how many drives they get from people who thought they could do it themselves by freezing them. https://www.gillware.com/blog/data-r...eezer-data-rec overy-myth/ Just like pseudoscience in the world of medicine, the freezer trick ³works² just barely often enough to encourage people to spread the idea to friends and neighbors. And when it ³works² it is only because the drive exhibits intermittent behavior. There¹s a 99.9% chance that not putting it in the freezer also would have resulted in the same data recovery outcome. .... When a failed drive comes out of the freezer and works again, it¹s only a matter of luck. Exposure to cold will not restore a dead sector¹s magnetic field or fix a corrupted partition table. It won¹t make blind read/write heads suddenly see, nor will it salve the burn on a fried control board. Quite frankly, people with freezer trick ³success stories² are just lucky they did not make their hard drives¹ problems worse. |
#10
|
|||
|
|||
Recommend data recovery company?
B00ze wrote:
Got a 15 years old WD IDE hard drive, that was showing ZERO problems in SMART data, suddenly can no longer calibrate (i.e. it can't read anymore.) NOW the SMART data is showing something's wrong. Hard drive "clicks" (heads go back and forth full disk) then quits trying. Have another of the same model, but hesitant moving the platters myself; apparently platters are not really "stuck" together and I could mis-align them (rotate them in relation to each other) rendering the whole thing un-readable. Was planning to move the data off but kept delaying since it showed no sign of problems... Now need a data recovery company; anyone have good experience with one and can recommend? How much are you willing to spend? Could be a few hundred dollars or a couple thousand depending on whether advanced (expensive) software could be used or they have to disassemble the drive in a clean room and use special equipment to read the magnetic dipoles from the platters. When my aunt found out it would cost $1500 to recover old data files from her defective HDD, she decided that old data wasn't really worth that much. Also, it is highly unlikely that they can recover 100% of the data from the platters. With luck being against you, likely the majority of the files you want to recover will be unrecoverable. nospam mentioned DriveSavers. They seem to be about what was estimated to rescue data from my aunt's HDD and the company name sounds familiar. https://www.geek.com/chips/drivesave...-drive-574764/ "Pricing is determined by the drive capacity, complexity and completeness of the data recovery. The cost for recovering data from a drive with severe media damage, like mine, is about $1900. An average single drive data recovery costs about $1500." https://acsdata.com/drivesavers-data-recovery/ That has ACS extolling DriveSavers, a competitor. Considering the how expensive it is to use physical recovery services, I find regular scheduled backups (which eliminates user intervention since humans are unreliable in saving backups at critical moments in change of state to their drives) to other internal media (for fast restores) and a 2nd copy of offline media to be far cheaper and the shortest time to recover. Can you find a seller of the same type (IDE) of drive at the same capacity (or a minimum size that would encompass the data files you think are on the failed drive)? The rescue service provider might get some of the data files off the failed drive but they may not be able to put them back on the same type and size of drive you had. How accurate is your measure of 15 years old for the failed drive? Up until somewhere to the 80's, MFM was used. That got replaced by RLL by the early 90's. Then came PATA and SATA (and some others). Since you mentioned IDE, yours is using PATA which was called ATA or [E]IDE before SATA came out. I did a search at Newegg on IDE, new, sold by Newegg and they don't carry any of those. If I removed "sold by Newegg" then a few were found; however, since they are sold by others using Newegg as their storefront, any delivery, condition, or warranty problems will have you dealing with the 3rd party seller, not with Newegg. There needs to be a drive available for purchase now (no, DriveSavers isn't going to computer swap meets) onto which your recovered data files can be stored. You have to determine if the new drive will be usable in your ancient computer. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Less-expensive data recovery company? | RickEB1 | Storage (alternative) | 3 | August 11th 05 05:36 PM |
Data Recovery Book and Online Business Promotion, Products Sales Promotion, Search Engine Optimization and Online Data Recovery Training services | Author Tarun Tyagi | Storage & Hardrives | 0 | December 14th 04 05:41 PM |
Please recommend data recovery tool | [email protected] | Storage (alternative) | 1 | August 9th 04 02:34 AM |
need advice on data recovery service company | alfonso gayoso | Storage (alternative) | 2 | February 10th 04 07:48 AM |
recommend data recovery service for crashed hard drive? | Mark F. | General | 4 | August 17th 03 04:57 AM |