Driver for Texas Instruments Microlaser 4/win?

Hi everybody!

Does anybody have a driver for this printer? Would like to test run it
with Win98SE.

Thanks in advance,

Andre

--

Please change no_spam to a.lodwig when replying via email!

On Wed, 16 Feb 2005 12:32:07 +0100, Andre
wrote:

Does anybody have a driver for this printer? Would like to test run it
with Win98SE.


See http://www.tallygenicom.com/drivers/ti.htm
and that leads you to
http://www.tallygenicom.com/support/technotes/ti/ti-win4-01.htm
"Reports indicate that the Win/4 drivers may cause conflicts with
Windows 98 Power Management. Customer reports indicate that disabling
Advanced Power Management appears to resolve these issues....The WPS
drivers found on the TallyGenicom site are the only drivers that will
function with the Win/4."

Hi Alan!

I found this, but there is no driver on these web sites.
I do not need power management.
Is there any source for the driver? Just want to give it a try.

Best regards,

Andre

Alan wrote:

On Wed, 16 Feb 2005 12:32:07 +0100, Andre
wrote:


Does anybody have a driver for this printer? Would like to test run it
with Win98SE.



See http://www.tallygenicom.com/drivers/ti.htm
and that leads you to
http://www.tallygenicom.com/support/technotes/ti/ti-win4-01.htm
"Reports indicate that the Win/4 drivers may cause conflicts with
Windows 98 Power Management. Customer reports indicate that disabling
Advanced Power Management appears to resolve these issues....The WPS
drivers found on the TallyGenicom site are the only drivers that will
function with the Win/4."




--

Please change no_spam to a.lodwig when replying via email!

On Mon, 21 Feb 2005 10:34:49 +0100, Andre
wrote:

Alan wrote:
On Wed, 16 Feb 2005 12:32:07 +0100, Andre
wrote:
Does anybody have a driver for this printer? Would like to test run it
with Win98SE.

See http://www.tallygenicom.com/drivers/ti.htm
and that leads you to
http://www.tallygenicom.com/support/technotes/ti/ti-win4-01.htm
"Reports indicate that the Win/4 drivers may cause conflicts with
Windows 98 Power Management. Customer reports indicate that disabling
Advanced Power Management appears to resolve these issues....The WPS
drivers found on the TallyGenicom site are the only drivers that will
function with the Win/4."

Hi Alan!
I found this, but there is no driver on these web sites.
I do not need power management.
Is there any source for the driver? Just want to give it a try.

On the first page above, http://www.tallygenicom.com/drivers/ti.htm,
if you look down the page there are links for
"·Legacy· microLaser Win/4", and there the "Drivers" link takes you to
http://www.tallygenicom.com/drivers/ti/ti-mlwin4-drv.htm
where there are English drivers at
ftp://ftp.tallygenicom.com/pub/genicom/drivers/ti/ti_ml-win4_eng.exe
and German at
ftp://ftp.tallygenicom.com/pub/genicom/drivers/ti/ti_ml-win4_ger.exe

I don't have this printer so I haven't tried them. But from the
documentation, I think these are your only choices. If they don't work
(they were originally for Win 3.1 and Win95), you have a doorstop. The
note above means you may have to turn power management off to use
them.

thanks very much, I did not see this link!

Best regards,

Andre


Alan wrote:

On the first page above, http://www.tallygenicom.com/drivers/ti.htm,
if you look down the page there are links for
"·Legacy· microLaser Win/4", and there the "Drivers" link takes you to
http://www.tallygenicom.com/drivers/ti/ti-mlwin4-drv.htm
where there are English drivers at
ftp://ftp.tallygenicom.com/pub/genicom/drivers/ti/ti_ml-win4_eng.exe
and German at
ftp://ftp.tallygenicom.com/pub/genicom/drivers/ti/ti_ml-win4_ger.exe

I don't have this printer so I haven't tried them. But from the
documentation, I think these are your only choices. If they don't work
(they were originally for Win 3.1 and Win95), you have a doorstop. The
note above means you may have to turn power management off to use
them.


--

Please change no_spam to a.lodwig when replying via email!