If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
GA-8IK1100 with 4 * DDR 512Mb
I'm having a few problems adding additional memory to my 8IK1100 based PC.
When I originally built the machine, I put 2 * DDR400 512Mb modules in it (slots 1 and 4, running as Dual Channel). I now need to add an additional 1Gb into the machine, so have tried adding another two 512Mb DDR400 into slots 2 and 5. The machine boots, and the BIOS check tells me it has 2Gb installed, however after about 5 or 10 minutes, the machine (running w2k3 server) blue screens. The machine is stable with *either* 512Mb pair, but as soon as I put both in... 5 or 10 minutes later, it blue screens. All DDR400 modules are double sided, although each pair is a different make (but all are DDR400 PC3200). Any ideas anyone? TIA, A. |
#2
|
|||
|
|||
Different make, they all have to be the same. Same brand and same size +
same memory timings. "Adam" wrote in message k... I'm having a few problems adding additional memory to my 8IK1100 based PC. When I originally built the machine, I put 2 * DDR400 512Mb modules in it (slots 1 and 4, running as Dual Channel). I now need to add an additional 1Gb into the machine, so have tried adding another two 512Mb DDR400 into slots 2 and 5. The machine boots, and the BIOS check tells me it has 2Gb installed, however after about 5 or 10 minutes, the machine (running w2k3 server) blue screens. The machine is stable with *either* 512Mb pair, but as soon as I put both in... 5 or 10 minutes later, it blue screens. All DDR400 modules are double sided, although each pair is a different make (but all are DDR400 PC3200). Any ideas anyone? TIA, A. |
#3
|
|||
|
|||
Thanks Richard, I was wondering if that was the problem.
A. "Richard Dower" wrote in message ... Different make, they all have to be the same. Same brand and same size + same memory timings. "Adam" wrote in message k... I'm having a few problems adding additional memory to my 8IK1100 based PC. When I originally built the machine, I put 2 * DDR400 512Mb modules in it (slots 1 and 4, running as Dual Channel). I now need to add an additional 1Gb into the machine, so have tried adding another two 512Mb DDR400 into slots 2 and 5. The machine boots, and the BIOS check tells me it has 2Gb installed, however after about 5 or 10 minutes, the machine (running w2k3 server) blue screens. The machine is stable with *either* 512Mb pair, but as soon as I put both in... 5 or 10 minutes later, it blue screens. All DDR400 modules are double sided, although each pair is a different make (but all are DDR400 PC3200). Any ideas anyone? TIA, A. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New 512MB memory only likes slot 1? | Tom | General | 1 | January 23rd 05 11:36 PM |
KR7A-133 Mobo won't recognize more than 512MB of RAM? Any ideas? | Z J | Abit Motherboards | 9 | May 8th 04 07:55 PM |
Asus P4P800-dlx and kingston hyperx 3500 512MB | naresh | Overclocking | 6 | February 20th 04 05:26 PM |
dual channel ram | philip.chadwick1 | Homebuilt PC's | 11 | September 5th 03 11:09 PM |
increase performance? using 4 modules of 512MB 2225 1T ? | ali yousefi | General | 1 | August 1st 03 12:07 PM |