If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
SATA bridgeboards for legacy drives
Okay, I know I'm crazy for wanting this, but...
Wanted: 1. SATA bridgeboard for legacy 3.5" floppy drive, or 3.5" SATA 4x floppy drive. 2. SATA bridgeboard for legacy 5.25" floppy drive, or 5.25" SATA floppy drive. 3. USB bridgeboard for legacy 5.25" floppy drive (instead of # 2). I know, I'm only a market of one. But, hey, they make 3.5" USB 4x floppy drives. I can dream. Plextor announced a 12x SATA DVD+/-RW drive. I want everything SATA. I don't want to transfer everything to a hard drive or CD. I don't care about speed. I just want connectivity. |
#2
|
|||
|
|||
"Jason Hunsaker" wrote in message om... Okay, I know I'm crazy for wanting this, but... Wanted: 1. SATA bridgeboard for legacy 3.5" floppy drive, or 3.5" SATA 4x floppy drive. 2. SATA bridgeboard for legacy 5.25" floppy drive, or 5.25" SATA floppy drive. 3. USB bridgeboard for legacy 5.25" floppy drive (instead of # 2). I know, I'm only a market of one. But, hey, they make 3.5" USB 4x floppy drives. I can dream. Plextor announced a 12x SATA DVD+/-RW drive. I want everything SATA. I don't want to transfer everything to a hard drive or CD. I don't care about speed. I just want connectivity. You've got it with USB. |
#3
|
|||
|
|||
Do they even make a 3.5" or 5.25" floppy drive which attaches
using the old pATA interface???? I have never seen one. Jason Hunsaker wrote: Wanted: 1. SATA bridgeboard for legacy 3.5" floppy drive, or 3.5" SATA 4x floppy drive. 2. SATA bridgeboard for legacy 5.25" floppy drive, or 5.25" SATA floppy drive. |
#4
|
|||
|
|||
Walt wrote:
Do they even make a 3.5" or 5.25" floppy drive which attaches using the old pATA interface???? I have never seen one. Sort of. The LS-120 and LS-240 have PATA interfaces and will read and write standard 1.4 meg 3-1/2" diskettes. On the other hand, ATA and ATAPI are not the same--SATA doesn't automatically support ATAPI--there are some bridge chips that will when used with a host adapter containing the same manufacturer's chip allow the connection of removable-media devices but that's not something one can count on working at this point. Jason Hunsaker wrote: Wanted: 1. SATA bridgeboard for legacy 3.5" floppy drive, or 3.5" SATA 4x floppy drive. 2. SATA bridgeboard for legacy 5.25" floppy drive, or 5.25" SATA floppy drive. -- --John Reply to jclarke at ae tee tee global dot net (was jclarke at eye bee em dot net) |
#5
|
|||
|
|||
|
#7
|
|||
|
|||
|
#8
|
|||
|
|||
On Sat, 03 Apr 2004 10:23:37 -0500, Gary Tait
wrote: On Sat, 03 Apr 2004 14:19:44 GMT, JT wrote: On 2 Apr 2004 11:13:57 -0800, (Jason Hunsaker) wrote: Okay, I know I'm crazy for wanting this, but... Wanted: 1. SATA bridgeboard for legacy 3.5" floppy drive, or 3.5" SATA 4x floppy drive. 2. SATA bridgeboard for legacy 5.25" floppy drive, or 5.25" SATA floppy drive. 3. USB bridgeboard for legacy 5.25" floppy drive (instead of # 2). I know, I'm only a market of one. But, hey, they make 3.5" USB 4x floppy drives. I can dream. Plextor announced a 12x SATA DVD+/-RW drive. I want everything SATA. I don't want to transfer everything to a hard drive or CD. I don't care about speed. I just want connectivity. Floppy drives, especially 5.25, are not going to be engineered for a new interface standard. There is NO market or demand for it. Not worth it from a manufacturing stand point. They are disappearing. 5.25 have already disappeared from all but dying niche markets. No advantage to have a slow drive like a floppy on a SATA controller. JT But anything you can connect a standard 3.5" PC floppy drive, you can connect a 5.25" drive to, if you want to work at it. True enough, but doesn't help with the original question. Floppies are disappearing. No one is building new interfaces for them. No reason to. When the floppy interface disappears from the motherboard, don't bother trying to connect a floppy. JT |
#9
|
|||
|
|||
"JT" wrote in message s.com... On Sat, 03 Apr 2004 10:23:37 -0500, Gary Tait wrote: On Sat, 03 Apr 2004 14:19:44 GMT, JT wrote: On 2 Apr 2004 11:13:57 -0800, (Jason Hunsaker) wrote: Okay, I know I'm crazy for wanting this, but... Wanted: 1. SATA bridgeboard for legacy 3.5" floppy drive, or 3.5" SATA 4x floppy drive. 2. SATA bridgeboard for legacy 5.25" floppy drive, or 5.25" SATA floppy drive. 3. USB bridgeboard for legacy 5.25" floppy drive (instead of # 2). I know, I'm only a market of one. But, hey, they make 3.5" USB 4x floppy drives. I can dream. Plextor announced a 12x SATA DVD+/-RW drive. I want everything SATA. I don't want to transfer everything to a hard drive or CD. I don't care about speed. I just want connectivity. Floppy drives, especially 5.25, are not going to be engineered for a new interface standard. There is NO market or demand for it. Not worth it from a manufacturing stand point. They are disappearing. 5.25 have already disappeared from all but dying niche markets. No advantage to have a slow drive like a floppy on a SATA controller. JT But anything you can connect a standard 3.5" PC floppy drive, you can connect a 5.25" drive to, if you want to work at it. True enough, but doesn't help with the original question. Floppies are disappearing. No one is building new interfaces for them. No reason to. When the floppy interface disappears from the motherboard, don't bother trying to connect a floppy. Or have the sense to use USB that will support floppy drives for a while yet. |
#10
|
|||
|
|||
"Gary Tait" wrote in message
On 2 Apr 2004 11:13:57 -0800, (Jason Hunsaker) wrote: Okay, I know I'm crazy for wanting this, but... Wanted: 1. SATA bridgeboard for legacy 3.5" floppy drive, or 3.5" SATA 4x floppy drive. 2. SATA bridgeboard for legacy 5.25" floppy drive, or 5.25" SATA floppy drive. SATA is HDDs, and ATAPI devices only. Oh? Care to tell where it says that? Floppys are practically obsolete anyway. 3. USB bridgeboard for legacy 5.25" floppy drive (instead of # 2). More doable. Just get a USB bridgeboard for a 3.5" drive and adapt it to work. Ever wondered what that 3.5/5.25 Drive A, Drive B setting is for in your BIOS? I know, I'm only a market of one. But, hey, they make 3.5" USB 4x floppy drives. I can dream. Plextor announced a 12x SATA DVD+/-RW drive. I want everything SATA. I don't want to transfer everything to a hard drive or CD. I don't care about speed. I just want connectivity. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
are SATA drives cooler to the touch than IDE? | AFN | General | 12 | October 28th 04 07:45 PM |
SATA Drives and Heat | Richard Alexander | General | 18 | April 20th 04 04:13 AM |
How good are SATA drives compared to IDE drives? | Dunny Rummy | General | 1 | February 12th 04 08:03 PM |
IDE drives with SATA drive adapters | Nick Mirro | Homebuilt PC's | 2 | November 13th 03 01:17 AM |
Raptor SATA Drives RAID 0? | Frank Weston | Overclocking AMD Processors | 0 | August 3rd 03 04:32 PM |