A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Video Cards » Ati Videocards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

ATI 9600 pro and CounterStrike performance help needed



 
 
Thread Tools Display Modes
  #1  
Old July 12th 03, 02:07 PM
Maintane
external usenet poster
 
Posts: n/a
Default ATI 9600 pro and CounterStrike performance help needed

My son has an Intel 850 mb, 1.8 p4, 384 mb rdram 800, 30g 7200/100 Maxtor
running DMA mode 5. I built the pc for his Xmas present year before last. He
recently had problems with his GeForce 2 card...the fan went out and I
believe damaged the card. I repl the fan, but no help. Jaggies and
choppiness prevailed.

I bought the ATI branded 9600 pro, and his frame rate will not go above 60,
and seems slower than the GF2. The old GF2 drivers were uninstalled, the
card removed, the new card installed with the latest Catylyst drivrs. All of
his friends get 100 fps.

Any suggestions?

Thanks,

Mike


--
__________________________________________________ ________

"There are three kinds of men. The one that learns by reading. The few
who learn by observation. The rest of them have to pee on the
electric fence for themselves."

- From 'The Wisdom of Will Rogers'


  #2  
Old July 12th 03, 03:04 PM
Maintane
external usenet poster
 
Posts: n/a
Default

Thanks, Frank! I'll have him try that today when he gets home. I don't know
if he's aware of that ability in console. Is there some special command
syntax, or is it just an option to toggle?

Mike


"Frank Weston" wrote in message
...
Turn off vsync and set fpsmax to 100 in Counterstrike console.


"Maintane" wrote in message
news
My son has an Intel 850 mb, 1.8 p4, 384 mb rdram 800, 30g 7200/100

Maxtor
running DMA mode 5. I built the pc for his Xmas present year before

last.
He
recently had problems with his GeForce 2 card...the fan went out and I
believe damaged the card. I repl the fan, but no help. Jaggies and
choppiness prevailed.

I bought the ATI branded 9600 pro, and his frame rate will not go above

60,
and seems slower than the GF2. The old GF2 drivers were uninstalled, the
card removed, the new card installed with the latest Catylyst drivrs.

All
of
his friends get 100 fps.

Any suggestions?

Thanks,

Mike


--
__________________________________________________ ________

"There are three kinds of men. The one that learns by reading. The few
who learn by observation. The rest of them have to pee on the
electric fence for themselves."

- From 'The Wisdom of Will Rogers'







  #3  
Old July 12th 03, 06:18 PM
Frank Weston
external usenet poster
 
Posts: n/a
Default

Just bring down console with the "~". Type fps_max, and it will show you
the value currently set. Next type "fps_max 100" to set fps_max to 100.
You can also edit the config.cfg file in Sierra/Counter-strike/cstrike/ to
add the line fps_max 100. There may well be a line in there right now that
limits your fps.

Just setting fps_max to 100 wil not guarantee fps of 100, but will allow you
to attain whatever performance your system is capable of up to 100.

Also, make sure you go into your Display Properties advanced settings and in
the Open GL tab set "wait for vertical sync" to off. While you're in
Display Properties, set your monitor refresh frequency to the highest speed
available for your adapter resolution.

You should get 100 fps. I did with a 9000 Pro running with an XP2100+
processor at the highest resolution my monitor could run.



"Maintane" wrote in message
m...
Thanks, Frank! I'll have him try that today when he gets home. I don't

know
if he's aware of that ability in console. Is there some special command
syntax, or is it just an option to toggle?

Mike


"Frank Weston" wrote in message
...
Turn off vsync and set fpsmax to 100 in Counterstrike console.


"Maintane" wrote in message
news
My son has an Intel 850 mb, 1.8 p4, 384 mb rdram 800, 30g 7200/100

Maxtor
running DMA mode 5. I built the pc for his Xmas present year before

last.
He
recently had problems with his GeForce 2 card...the fan went out and I
believe damaged the card. I repl the fan, but no help. Jaggies and
choppiness prevailed.

I bought the ATI branded 9600 pro, and his frame rate will not go

above
60,
and seems slower than the GF2. The old GF2 drivers were uninstalled,

the
card removed, the new card installed with the latest Catylyst drivrs.

All
of
his friends get 100 fps.

Any suggestions?

Thanks,

Mike


--
__________________________________________________ ________

"There are three kinds of men. The one that learns by reading. The

few
who learn by observation. The rest of them have to pee on the
electric fence for themselves."

- From 'The Wisdom of Will Rogers'









 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:44 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.