A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Compaq Servers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Compaq Proliant 5500 won't power up



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old September 18th 03, 11:50 AM
Jim Balson
external usenet poster
 
Posts: n/a
Default Compaq Proliant 5500 won't power up



I just bought a used Compaq Proliant 5500 server. I installed Linux on
it and all is working OK. I then wanted to have a look 'inside'. So I removed
the side cover and began to poke around a bit. I removed the CPU's and the
CPU Power Modules. I put them back in, just wanted to check them out.

I put the cover back on now it won't power on. The fans wil lnot come,
nothing. There are however some lights on the motherboard that are 'ON'. They a

Light color
----- -----
Memory off
CPU 4 on amber
CPU 3 on amber
CPU 2 on amber
CPU 1 on amber
I/O on amber


Then just below these lights there is another light that is on. It is
labeled "General Interlock Fault". It is on and Yellow.

GIF on yellow

Generally, I consider myself a hands on type of person in that I have
opened many comuters before, rebuilt them by replacing cards, disks, power
supplies, floppies, etc. Never ran into any major problems.

I think that in this case however, I didn't truly know what I was doing.
I suspect that anyway. I have since been reading about the Proliant 5500 and
found that there are some security features that I don't know much about.

From HP's web site, I have foundthe Proliant 5500 web site and see
in the product description the following:

Security
Power-on password; keyboard password; Quicklock; QuickBlank;
Network Server Mode; Diskette Boot Control;
Diskette Drive Control; Serial Interface Control;
Parallel Interface Control; System Configuration Lock;
Administrator's Password; Protected Power Switch.


I can't seem to find any more information about these security features.
I suspect that I violated some security feature (by removing thew CPU's?) on
this sysem and it now won't power on until I do something. But I'm not sure
of this and if I'm right, I've no idea what I nee to do to get it to power on.

I'm going to continue looking for info on these security features, but if
anyone knows anything about, if oyu could guide me as to what I need to do to
get this machine to power on, it would be greatly apprecieated.



Thanks, Jim




--
-----------------------
Jim
balson AT comcast DOT net

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compaq FAQ HH Compaq Computers 0 October 10th 04 12:49 PM
Compaq user diagnostics diskette bananaboat Compaq Computers 3 April 21st 04 03:05 AM
Happy Birthday America SST Overclocking 333 November 27th 03 07:54 PM
Happy Birthday America SST Overclocking AMD Processors 326 November 27th 03 07:54 PM
How can I make motherboard to restart after power loss automatically? Amiran General 1 September 24th 03 11:35 PM


All times are GMT +1. The time now is 02:06 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.