|If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.|
||Thread Tools||Display Modes|
GA-Z68MX-UD2H-B3 USB 3.0 port will not open USB 2.0 storage devices
I have just assembled a Windows 7 PC using a I5-2500K processor,
GA-Z68MX-UD2H-B3 motherboard, 4GB of RAM and a 250 GB Seagate HD. Drivers were
downloaded from the Gigabyte site and installed after the windows installation.
Everything seems to be working EXCEPT:
When I connect to the USB 3.0 ports a Sandisk Cruzerblade 4GB USB flash drive,
an older .5GB Sandisk USB flash, A Seagate 1.5GB USB, or an older 250 GB Maxtor
USB drive, the device is not properly identified, and cannot be accessed. All
these devices are USB 2.0 drives. If I connect a WD Mybook USB 3.0 drive,
everything works fine. Connecting a USB 2.0 mouse also works fine.
The Cruzerblade shows USB Amss Storage Device, driver 6.1.7601.17514 and
Hardware Ids USB\VID_0781&PID_5567&REV_0200 when connected using one of the USB
Using the USB 3.0 port, it shows Unknown Device, the same driver #, but "No
drivers are installed for this device", Hardware Ids show as USB/Unknown.
I've tried unloading, re-downloading and re-installing the Etron USB 3.0 driver,
with no improvement.
Can anyone offer suggestions on what the problem is or how I can track it down?
|Thread||Thread Starter||Forum||Replies||Last Post|
|Copy from multiple USB Storage devices||[email protected]||General||1||March 5th 08 12:40 PM|
|IDE port for 3 devices||[email protected]||General||7||September 12th 06 12:52 AM|
|USB mass storage devices - Please help||Mark G.||Asus Motherboards||2||January 9th 05 10:54 PM|
|DVD RW & HDD Storage devices undecided...recommendations??||MT||Homebuilt PC's||5||February 8th 04 11:28 PM|
|storage devices||zap||General Hardware||0||November 19th 03 02:20 PM|