![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I have an Epson Stylus CX 5400. Just replaced the black ink cartridge. Now
it wont print anything, just blank pages. The color cartridges didnt need changing and I used an OEM Cartridge to replace the black. I have gone through everything in the online instructions and instruction manual. Nothing works. Just prints blank pages. Doea anyone have a solution? Thanks in advance. Jeff |
#2
|
|||
|
|||
![]()
If you email me and request the Epson Cleaning Manual, I will send you a
copy. It will probably resolve the issue you are facing. Art email at: e-printerhelp(at)mvps(dot)org (at) = @ (dot) = . Jeff wrote: I have an Epson Stylus CX 5400. Just replaced the black ink cartridge. Now it wont print anything, just blank pages. The color cartridges didnt need changing and I used an OEM Cartridge to replace the black. I have gone through everything in the online instructions and instruction manual. Nothing works. Just prints blank pages. Doea anyone have a solution? Thanks in advance. Jeff |
#4
|
|||
|
|||
![]()
Before you do anything, give Art a email, stating model and the fault,
ask him for his cleaning manual, he will gladly oblige and you will find it's free of charge. His Email is you will find his posts throughout these pages. Davy |
#5
|
|||
|
|||
![]() "Jan Alter" wrote in message news:amiPe.10669$Vg7.3172@trnddc06... You removed the tape on the cartridge of course before fitting it into the printer. There is no tape on the cartridge to the CX 5400. |
#6
|
|||
|
|||
![]()
It is reported a relative high percentage of the cleaning pump failure of
this series printers. I assume the pump isn't working correct. -- |
#7
|
|||
|
|||
![]()
Is it an actual failure of the purge/cleaning pump, or the fact that the
hose to the cleaning station from the cleaning pump becomes detached that is being reported? Art Yianni wrote: It is reported a relative high percentage of the cleaning pump failure of this series printers. I assume the pump isn't working correct. -- |
#8
|
|||
|
|||
![]()
Should be easy to determine if its the pump, simply lift the top and
see if you can see ink flowing through the plastic waste pipe thats connected to the underside of the docking bay, if you switch on or go through a cleaning cycle the ink should easily be seen flowing in the pipe. If it comes away there will be a good chance of ink spillage on the bottom of the printer, another quick way to see if it came detached (which is a common problem with the C series), get a pencil and see if you pipe is easily moved, if its loose it will easily flop about at the free end. All the pump is is a gear from the paper feed rollor and a rotating disc with a little bump on it like an hammer, since the tube is coiled in a circular mannor, the bump squashes the tube as it rotates in a circular motion causing the ink to be sucked. Art refered to it as a mini milking machine some while back which is a very good description. The pump don't work, the ink is'nt sucked from the heads and it dries up causing clogs, which is pushed back into the nozzles by the wiper blade. Davy |
#9
|
|||
|
|||
![]()
In my opinion it could happened both.
If I remember correct you sent an image (hose loose from the pad). A user could repair this failure easy, so sending it here it could be help Jeff. -- Yianni -- "Arthur Entlich" wrote in message news:9pCPe.307814$5V4.2742@pd7tw3no... Is it an actual failure of the purge/cleaning pump, or the fact that the hose to the cleaning station from the cleaning pump becomes detached that is being reported? Art Yianni wrote: It is reported a relative high percentage of the cleaning pump failure of this series printers. I assume the pump isn't working correct. -- |
#10
|
|||
|
|||
![]()
Jeff wrote:
I have an Epson Stylus CX 5400. Just replaced the black ink cartridge. Now it wont print anything, just blank pages. The color cartridges didnt need changing and I used an OEM Cartridge to replace the black. I have gone through everything in the online instructions and instruction manual. Nothing works. Just prints blank pages. Doea anyone have a solution? Thanks in advance. Jeff Basically I have the same problem. How was yours resolved. I am going through he cleaning process and I did reconnect the small supply tube...I now qualify as a heart surgeon. It was not easy reconnecting the tube without taking the printer apart. |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
wanted: service manuals ricoh | FutureChild | Printers | 14 | March 30th 05 07:25 PM |
Epson Stylus MAJOR Flaw~ | Menudoboy2 | Printers | 3 | January 12th 05 04:32 PM |
Epson Stylus CX5400 belt grinder... | Amishman35 | Printers | 2 | January 13th 04 04:07 PM |
Epson Stylus 1270 RIP install problems | No One You Know - Yet | Printers | 2 | October 13th 03 03:06 PM |
Epson Stylus 1270 RIP install problems | No One You Know - Yet | Printers | 0 | October 11th 03 03:34 PM |