If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Newbie questions on overclocking Mobile AMD 2400+/266 Athlon XP with A7N8X-E Deluxe rev.2
SO I have received the new components for my re-build and installed the motherboard and PCI cards from my old system (Promise/SCSI\SoundBlaster Live\ATI Raedon All-In-Wonder). before I do anything else, I need advise on what jumpers I should change to overclock this system and once that is done, what steps should I take once I turn on the system (BIOS modifications necessary). New CPU, Memory and Motherboard: ASUS A7N8X-E Deluxe rev.2 CPU MOBILE AMD 2400+/266 ATHLON XP CPU FAN|AERO FLOW VA4-C7040 VTEC RT 2 x (80061) Crucial Technology CT6464Z335 512MB DDR333 PC2700 Memory CASE: Cooler Master Wave Master I have 2 additional questions for anyone else familiar with the board and this specific case. The case comes with a top mounted USB/Firewire/Audio module and no instructions on hop to connect them to the system. I THINK I have figured out the 2 USB headers but the confused about the others. From the 1394 type plug I figure that it can only be connected to an internal device of some sort from the type of plug. The audio plug has 4 tiny wires 1 Purple, 1 Blue, 1 Green and 1 Yellow. On the motherboard the Front panel audio connector (FPAUDIO1) has 9 pins MIC2-AGND-MICPWR-+5VA-LineOut_R-Bline_Out_R-NC-Line out_L-Bline_out_L. Which pin goes where? Hidden in the front of the case are 2 blue & white twisted wires connected to a pair of power connectore on each. What are these for? TIA Arawak |
#2
|
|||
|
|||
"Arawak" wrote in message ... SO I have received the new components for my re-build and installed the motherboard and PCI cards from my old system (Promise/SCSI\SoundBlaster Live\ATI Raedon All-In-Wonder). before I do anything else, I need advise on what jumpers I should change to overclock this system and once that is done, what steps should I take once I turn on the system (BIOS modifications necessary). New CPU, Memory and Motherboard: ASUS A7N8X-E Deluxe rev.2 CPU MOBILE AMD 2400+/266 ATHLON XP CPU FAN|AERO FLOW VA4-C7040 VTEC RT 2 x (80061) Crucial Technology CT6464Z335 512MB DDR333 PC2700 Memory CASE: Cooler Master Wave Master I have 2 additional questions for anyone else familiar with the board and this specific case. The case comes with a top mounted USB/Firewire/Audio module and no instructions on hop to connect them to the system. I THINK I have figured out the 2 USB headers but the confused about the others. From the 1394 type plug I figure that it can only be connected to an internal device of some sort from the type of plug. The audio plug has 4 tiny wires 1 Purple, 1 Blue, 1 Green and 1 Yellow. On the motherboard the Front panel audio connector (FPAUDIO1) has 9 pins MIC2-AGND-MICPWR-+5VA-LineOut_R-Bline_Out_R-NC-Line out_L-Bline_out_L. Which pin goes where? Hidden in the front of the case are 2 blue & white twisted wires connected to a pair of power connectore on each. What are these for? TIA Arawak http://www.coolermaster.com/index.ph...CWave%20Master http://www.coolermaster.com/product_...097966e5e1.jpg |
#3
|
|||
|
|||
On Wed, 10 Mar 2004 08:05:58 -0000, "rstlne"
wrote: "Arawak" wrote in message .. . SO I have received the new components for my re-build and installed the motherboard and PCI cards from my old system (Promise/SCSI\SoundBlaster Live\ATI Raedon All-In-Wonder). before I do anything else, I need advise on what jumpers I should change to overclock this system and once that is done, what steps should I take once I turn on the system (BIOS modifications necessary). New CPU, Memory and Motherboard: ASUS A7N8X-E Deluxe rev.2 CPU MOBILE AMD 2400+/266 ATHLON XP CPU FAN|AERO FLOW VA4-C7040 VTEC RT 2 x (80061) Crucial Technology CT6464Z335 512MB DDR333 PC2700 Memory CASE: Cooler Master Wave Master I have 2 additional questions for anyone else familiar with the board and this specific case. The case comes with a top mounted USB/Firewire/Audio module and no instructions on hop to connect them to the system. I THINK I have figured out the 2 USB headers but the confused about the others. From the 1394 type plug I figure that it can only be connected to an internal device of some sort from the type of plug. The audio plug has 4 tiny wires 1 Purple, 1 Blue, 1 Green and 1 Yellow. On the motherboard the Front panel audio connector (FPAUDIO1) has 9 pins MIC2-AGND-MICPWR-+5VA-LineOut_R-Bline_Out_R-NC-Line out_L-Bline_out_L. Which pin goes where? Hidden in the front of the case are 2 blue & white twisted wires connected to a pair of power connectore on each. What are these for? TIA Arawak http://www.coolermaster.com/index.ph...CWave%20Master http://www.coolermaster.com/product_...097966e5e1.jpg No help there. Emails to support bounces and the diagram on their site which shows the correct Firewire type plug differs from the one that came with the same model. Still no instructions or FAQ answering my question. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Breaking in a AMD Mobile 2400 any suggestions. | OCZ Guy | General | 4 | July 29th 04 02:30 PM |
Breaking in a AMD Mobile 2400 any suggestions. | OCZ Guy | Overclocking | 1 | July 23rd 04 08:38 PM |
Overclocking Questions | Snøøp¥ | Overclocking | 11 | June 1st 04 04:07 PM |
Need help overclocking Barton 2500+ on AsRock K7VM4 and video capture questions | Bill | Overclocking AMD Processors | 6 | November 21st 03 06:25 PM |
Overclocking XP mobile processors | SPS 700 | Overclocking AMD Processors | 1 | November 9th 03 10:30 AM |