If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Looking to solve problems before they happen
I'm looking to have the following system put together that I can use as a
multi-boot setup: Case and PSU: Something from Antec, probably Motherboard: Asus P4C800 Deluxe CPU: Intel P4 3.0E 1M mPGA Socket 478 with 800 MHz FSB RAM: (2) x 256M PC3200 DDR 400, may raise to (4) x 256 or (2) x 512 later HDD: 80 Gig Seagate 8M 7200 rpm SATA, maybe 160Gigs Video card: 64M Sapphire ATI Radeon 7000 AGP4x Monitor: NEC 19-inch CRT The main thing I want to know is whether Win 98SE will run on this hardware as is or what workarounds I'd need to get it to run without problems. For the time being I need Win98SE to run some legacy DOS programs, although I will dump it later Initially I'd want to set up Win 98SE and either XP Pro or 2000 Pro to boot separately on separate partitions with my apps on a third partition. Later I probably will want to add Linux in order to learn it. If anyone knows, what problems if any with any of this hardware or these features do I have to look out for with Win 98SE? If there are problems are there any patches or drivers I'll need to have on hand to prevent/fix them? If any of these hardware choices presents a particular problem is there a different one just as good that solves it? Anything anyone could tell me about setting up this kind of dual boot setup on this hardware would be great. TIA to all for your help before I spend my money-- Will |
#2
|
|||
|
|||
Decent setup,except the vid card. Get at least a 9600 pro,if you must have ATI.
W98 will run fine. I'm looking to have the following system put together that I can use as a multi-boot setup: Case and PSU: Something from Antec, probably Motherboard: Asus P4C800 Deluxe CPU: Intel P4 3.0E 1M mPGA Socket 478 with 800 MHz FSB RAM: (2) x 256M PC3200 DDR 400, may raise to (4) x 256 or (2) x 512 later HDD: 80 Gig Seagate 8M 7200 rpm SATA, maybe 160Gigs Video card: 64M Sapphire ATI Radeon 7000 AGP4x Monitor: NEC 19-inch CRT The main thing I want to know is whether Win 98SE will run on this hardware as is or what workarounds I'd need to get it to run without problem. |
#3
|
|||
|
|||
YanquiDawg wrote:
Decent setup,except the vid card. Get at least a 9600 pro,if you must have ATI. W98 will run fine. Well, except for the 2.2 Gig speed problem (download the fix), needing to modify system.ini to restrict disk cache to under 500 Meg (when he adds the RAM he listed), fdisk not working on drives over 64 Gig (download the fix), Format displaying wrong with drives over 64 Gig (ignore it, it still works) and the 137 Gig hard drive limit (the fdisk fix don't 'fix' that). I'm looking to have the following system put together that I can use as a multi-boot setup: Case and PSU: Something from Antec, probably Motherboard: Asus P4C800 Deluxe CPU: Intel P4 3.0E 1M mPGA Socket 478 with 800 MHz FSB RAM: (2) x 256M PC3200 DDR 400, may raise to (4) x 256 or (2) x 512 later HDD: 80 Gig Seagate 8M 7200 rpm SATA, maybe 160Gigs Video card: 64M Sapphire ATI Radeon 7000 AGP4x Monitor: NEC 19-inch CRT The main thing I want to know is whether Win 98SE will run on this hardware as is or what workarounds I'd need to get it to run without problem. |
#4
|
|||
|
|||
On Sat, 04 Sep 2004 16:49:18 -0500, you wrote:
YanquiDawg wrote: Decent setup,except the vid card. Get at least a 9600 pro,if you must have ATI. W98 will run fine. Well, except for the 2.2 Gig speed problem (download the fix), needing to modify system.ini to restrict disk cache to under 500 Meg (when he adds the RAM he listed), fdisk not working on drives over 64 Gig (download the fix), Format displaying wrong with drives over 64 Gig (ignore it, it still works) and the 137 Gig hard drive limit (the fdisk fix don't 'fix' that). Thanks to the both of you. I think I've tracked down those fixes. Is there anything else you can think of that might throw me off, or any reason I should go with a different config in order to run Win98? I think I've got the info I need to set up the Win 98/Win 2000 Pro dual boot arrangement okay, but if you can add anything that would be great. Thanks again. Will I'm looking to have the following system put together that I can use as a multi-boot setup: Case and PSU: Something from Antec, probably Motherboard: Asus P4C800 Deluxe CPU: Intel P4 3.0E 1M mPGA Socket 478 with 800 MHz FSB RAM: (2) x 256M PC3200 DDR 400, may raise to (4) x 256 or (2) x 512 later HDD: 80 Gig Seagate 8M 7200 rpm SATA, maybe 160Gigs Video card: 64M Sapphire ATI Radeon 7000 AGP4x Monitor: NEC 19-inch CRT The main thing I want to know is whether Win 98SE will run on this hardware as is or what workarounds I'd need to get it to run without problem. |
#5
|
|||
|
|||
Will Carter wrote:
On Sat, 04 Sep 2004 16:49:18 -0500, you wrote: YanquiDawg wrote: Decent setup,except the vid card. Get at least a 9600 pro,if you must have ATI. W98 will run fine. Well, except for the 2.2 Gig speed problem (download the fix), needing to modify system.ini to restrict disk cache to under 500 Meg (when he adds the RAM he listed), fdisk not working on drives over 64 Gig (download the fix), Format displaying wrong with drives over 64 Gig (ignore it, it still works) and the 137 Gig hard drive limit (the fdisk fix don't 'fix' that). Thanks to the both of you. I think I've tracked down those fixes. Is there anything else you can think of that might throw me off, or any reason I should go with a different config in order to run Win98? I think I've got the info I need to set up the Win 98/Win 2000 Pro dual boot arrangement okay, but if you can add anything that would be great. Nothing else I can think of off hand other than to verify that all your hardware comes with Win98 drivers. Thanks again. Will I'm looking to have the following system put together that I can use as a multi-boot setup: Case and PSU: Something from Antec, probably Motherboard: Asus P4C800 Deluxe CPU: Intel P4 3.0E 1M mPGA Socket 478 with 800 MHz FSB RAM: (2) x 256M PC3200 DDR 400, may raise to (4) x 256 or (2) x 512 later HDD: 80 Gig Seagate 8M 7200 rpm SATA, maybe 160Gigs Video card: 64M Sapphire ATI Radeon 7000 AGP4x Monitor: NEC 19-inch CRT The main thing I want to know is whether Win 98SE will run on this hardware as is or what workarounds I'd need to get it to run without problem. |
#6
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DirectX Problems! | Faustus | Homebuilt PC's | 4 | December 24th 03 10:42 PM |
Major Computer Problems | Toronto Garage Door Company | Overclocking | 5 | December 7th 03 05:54 AM |
Major Computer Problems | Toronto Garage Door Company | General | 20 | November 13th 03 09:41 PM |
WinXP Boot problems *sigh* - UPDATE - Help? | Phrederik | General | 0 | August 29th 03 04:41 PM |
WinXP Boot problems *sigh* - UPDATE - Help? | Phrederik | Overclocking AMD Processors | 0 | August 29th 03 04:41 PM |