If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Generic SCSI / SATA Drives in MSA500, MSA1000, and MSA20?
Can you use any hotswap SCSI drive in the MSA500 / MSA1000 enclosure?
Can you use any SATA drive in the MSA20 enclosure? Will MSA20 even work with the newer 500 GB SATA drives? Does MSA20 expose each of the 12 SATA drives as a separate SCSI ID, numbers 0 through 11? -- Will |
#2
|
|||
|
|||
Generic SCSI / SATA Drives in MSA500, MSA1000, and MSA20?
"Jez T" wrote in message
... Can you use any hotswap SCSI drive in the MSA500 / MSA1000 enclosure? No. Call HP and ask them for the correct part numbers So if I stick a generic SCSI drive in this enclosure the enclosure will show an error and refuse to work with it? -- Will |
Thread Tools | |
Display Modes | |
|
|