If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help please!
Hello!
I bought Club3d X1950Pro AGP. My system is : Athlon 64 3000+, MBO Asus K8N, 2GB DDR400 memory, Hdd 160gb Maxtor, Chieftec 450W power supply. Catalyst version 7.6 OS Vista Home Premium & XP Pro Sp2 - same problem. I got artifact in games, somethimes my screen goes to sleep in game, once computer rebooted itself while playing. CPU temp is 50C max MBO tem is 45C max GPU temp is 55C max (Everest is used to monitor temps.) What could cause the problems? Help please! Ivan |
#2
|
|||
|
|||
Help please!
"EagleOne" wrote in message ... Hello! I bought Club3d X1950Pro AGP. My system is : Athlon 64 3000+, MBO Asus K8N, 2GB DDR400 memory, Hdd 160gb Maxtor, Chieftec 450W power supply. Catalyst version 7.6 OS Vista Home Premium & XP Pro Sp2 - same problem. I got artifact in games, somethimes my screen goes to sleep in game, once computer rebooted itself while playing. CPU temp is 50C max MBO tem is 45C max GPU temp is 55C max (Everest is used to monitor temps.) What could cause the problems? Help please! Ivan I have a Powercolor X1950Pro AGP with the same Arctic Cooling Accelero type cooler and have had problems with the PC crashing but no artifacts. With artifacts I would think its a driver issue , but rebooting could be overheating. I have tried Powercolor tech support but no response yet. I searched online and found that there are problems with the Voltage Regulator Module (VRM) overheating with early versions of X1950Pro AGP and also some of the cards with the Accelero cooler. The VRM is at the end of the card and needs a heat sink for cooling. Here is the heat sink that Arctic cooler has made for this problem: http://www.arctic-cooling.com/vga2.p...0&data=3&disc= I have not tried this yet because I wanted to see what Powercolor has for a solution first, but it seems they are not willing to help. I would first try the Club3d support and see if its maybe its a driver issue and/or with Vista. You can do a Goggle search for X1950 PRO AGP and VRM coolers. |
#3
|
|||
|
|||
Help please!
"Lou" wrote in message ... "EagleOne" wrote in message ... Hello! I bought Club3d X1950Pro AGP. My system is : Athlon 64 3000+, MBO Asus K8N, 2GB DDR400 memory, Hdd 160gb Maxtor, Chieftec 450W power supply. Catalyst version 7.6 OS Vista Home Premium & XP Pro Sp2 - same problem. I got artifact in games, somethimes my screen goes to sleep in game, once computer rebooted itself while playing. CPU temp is 50C max MBO tem is 45C max GPU temp is 55C max (Everest is used to monitor temps.) What could cause the problems? Help please! Ivan I have a Powercolor X1950Pro AGP with the same Arctic Cooling Accelero type cooler and have had problems with the PC crashing but no artifacts. With artifacts I would think its a driver issue , but rebooting could be overheating. I have tried Powercolor tech support but no response yet. I searched online and found that there are problems with the Voltage Regulator Module (VRM) overheating with early versions of X1950Pro AGP and also some of the cards with the Accelero cooler. The VRM is at the end of the card and needs a heat sink for cooling. Here is the heat sink that Arctic cooler has made for this problem: http://www.arctic-cooling.com/vga2.p...0&data=3&disc= I have not tried this yet because I wanted to see what Powercolor has for a solution first, but it seems they are not willing to help. I would first try the Club3d support and see if its maybe its a driver issue and/or with Vista. You can do a Goggle search for X1950 PRO AGP and VRM coolers. Thanx Lou! I believed that is a overheating issue. On a cold day i have no artifacts though. Maybe VRM overheat issue causes artifacts in my case? |
#4
|
|||
|
|||
Help please!
overheating
|
Thread Tools | |
Display Modes | |
|
|