If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
nf7 s2 die after cleaning
Hi there, my first post.
i have nf7 v2 board on my system everything works great till i decide to clean it. took it all apart and put it together then wont get anything. power on board fan spinning but no beef or post. I have 2500 barton on it with 1 gig ram. all components are working bec. after so many trie decided to get a KW7, all components from nf7 working on KW7 so im sure its the board. can anybody have an idea what went wrong. I did ground my self for static purtoses before taking it apart and i have done this so many times. Is anybody have encounter this kind of problem, I love m nf7 and cant find one thats why i end up with KW7. thanks Bernie |
#2
|
|||
|
|||
nf7 s2 die after cleaning
On Sat, 24 Dec 2005 12:15:06 -0600, Bernie wrote:
Hi there, my first post. i have nf7 v2 board on my system everything works great till i decide to clean it. took it all apart and put it together then wont get anything. power on board fan spinning but no beef or post. I have 2500 barton on it with 1 gig ram. all components are working bec. after so many trie decided to get a KW7, all components from nf7 working on KW7 so im sure its the board. can anybody have an idea what went wrong. I did ground my self for static purtoses before taking it apart and i have done this so many times. Is anybody have encounter this kind of problem, I love m nf7 and cant find one thats why i end up with KW7. thanks Bernie Check that the power supply connector pins on the motherboard are not bent. Check that the CPU is seated properly. Check that the CPU fan is connected to the right place. Try clearing out the bios. Hope you get it working :-) but maybe it was its time to die. :-( Ak |
#3
|
|||
|
|||
nf7 s2 die after cleaning
Alfred Kaufmann wrote:
On Sat, 24 Dec 2005 12:15:06 -0600, Bernie wrote: Hi there, my first post. i have nf7 v2 board on my system everything works great till i decide to clean it. took it all apart and put it together then wont get anything. power on board fan spinning but no beef or post. I have 2500 barton on it with 1 gig ram. all components are working bec. after so many trie decided to get a KW7, all components from nf7 working on KW7 so im sure its the board. can anybody have an idea what went wrong. I did ground my self for static purtoses before taking it apart and i have done this so many times. Is anybody have encounter this kind of problem, I love m nf7 and cant find one thats why i end up with KW7. thanks Bernie Check that the power supply connector pins on the motherboard are not bent. Check that the CPU is seated properly. Check that the CPU fan is connected to the right place. Try clearing out the bios. Hope you get it working :-) but maybe it was its time to die. :-( Ak thanks for the reply, but I did all that. Its not even a year old huhuhu. I also use 2 cpu just to make sure but nothing. |
#4
|
|||
|
|||
nf7 s2 die after cleaning
On Sat, 24 Dec 2005 16:28:25 -0600, Bernie wrote:
Alfred Kaufmann wrote: On Sat, 24 Dec 2005 12:15:06 -0600, Bernie wrote: Hi there, my first post. i have nf7 v2 board on my system everything works great till i decide to clean it. took it all apart and put it together then wont get anything. power on board fan spinning but no beef or post. I have 2500 barton on it with 1 gig ram. all components are working bec. after so many trie decided to get a KW7, all components from nf7 working on KW7 so im sure its the board. can anybody have an idea what went wrong. I did ground my self for static purtoses before taking it apart and i have done this so many times. Is anybody have encounter this kind of problem, I love m nf7 and cant find one thats why i end up with KW7. thanks Bernie Check that the power supply connector pins on the motherboard are not bent. Check that the CPU is seated properly. Check that the CPU fan is connected to the right place. Try clearing out the bios. Hope you get it working :-) but maybe it was its time to die. :-( Ak thanks for the reply, but I did all that. Its not even a year old huhuhu. I also use 2 cpu just to make sure but nothing. Answers from the ABit web site. Answers: What is the warranty for my motherboard? The first 2 years parts and labor is free and on the 3rd year parts is free but labor is $25.00. How can I get the rma no.? You have to go to our website rma.abit-usa.com Ak |
#5
|
|||
|
|||
nf7 s2 die after cleaning
Alfred Kaufmann wrote:
On Sat, 24 Dec 2005 16:28:25 -0600, Bernie wrote: Alfred Kaufmann wrote: On Sat, 24 Dec 2005 12:15:06 -0600, Bernie wrote: Hi there, my first post. i have nf7 v2 board on my system everything works great till i decide to clean it. took it all apart and put it together then wont get anything. power on board fan spinning but no beef or post. I have 2500 barton on it with 1 gig ram. all components are working bec. after so many trie decided to get a KW7, all components from nf7 working on KW7 so im sure its the board. can anybody have an idea what went wrong. I did ground my self for static purtoses before taking it apart and i have done this so many times. Is anybody have encounter this kind of problem, I love m nf7 and cant find one thats why i end up with KW7. thanks Bernie Check that the power supply connector pins on the motherboard are not bent. Check that the CPU is seated properly. Check that the CPU fan is connected to the right place. Try clearing out the bios. Hope you get it working :-) but maybe it was its time to die. :-( Ak thanks for the reply, but I did all that. Its not even a year old huhuhu. I also use 2 cpu just to make sure but nothing. Answers from the ABit web site. Answers: What is the warranty for my motherboard? The first 2 years parts and labor is free and on the 3rd year parts is free but labor is $25.00. How can I get the rma no.? You have to go to our website Ak Thanks, i will surely do that. |
#6
|
|||
|
|||
nf7 s2 die after cleaning
On Sat, 24 Dec 2005 12:15:06 -0600, Bernie had a
flock of green cheek conures squawk out: Hi there, my first post. i have nf7 v2 board on my system everything works great till i decide to clean it. took it all apart and put it together then wont get anything. power on board fan spinning but no beef or post. I have 2500 barton on it with 1 gig ram. all components are working bec. after so many trie decided to get a KW7, all components from nf7 working on KW7 so im sure its the board. can anybody have an idea what went wrong. I did ground my self for static purtoses before taking it apart and i have done this so many times. Is anybody have encounter this kind of problem, I love m nf7 and cant find one thats why i end up with KW7. thanks Bernie Is the AC power cable fully plugged in on both ends? Case power switch connected to the correct pins? Stephen -- |
#7
|
|||
|
|||
nf7 s2 die after cleaning
Stephen wrote:
On Sat, 24 Dec 2005 12:15:06 -0600, Bernie had a flock of green cheek conures squawk out: Hi there, my first post. i have nf7 v2 board on my system everything works great till i decide to clean it. took it all apart and put it together then wont get anything. power on board fan spinning but no beef or post. I have 2500 barton on it with 1 gig ram. all components are working bec. after so many trie decided to get a KW7, all components from nf7 working on KW7 so im sure its the board. can anybody have an idea what went wrong. I did ground my self for static purtoses before taking it apart and i have done this so many times. Is anybody have encounter this kind of problem, I love m nf7 and cant find one thats why i end up with KW7. thanks Bernie Is the AC power cable fully plugged in on both ends? Case power switch connected to the correct pins? Stephen Yes it does I even use 2 different pwr supply. I working to RMA it to abit. for now Im using the KW7 but i prefer NF7 better. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
nozzle cleaning on ESCs 760, 860, 1160 | Joe D | Printers | 1 | December 19th 05 11:01 AM |
HP Deskjet 1220 Cleaning Kit problem | Matti Partonen | Printers | 5 | November 11th 04 01:04 AM |
DAT drive recommendations? | Jonathan Sachs | Storage (alternative) | 34 | October 14th 04 01:44 PM |
Cleaning the CPU | Vin | Overclocking | 20 | September 7th 03 12:21 AM |
Vuescan, IR cleaning, which film scanner? | Sanaka | Scanners | 1 | August 21st 03 04:24 PM |