If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
tv out gf4 problem
i got problem with synchronization images on tv and monitor e.g.
game on monitor runs ideally smooth on tv in clone mode same game got terrible hoops. i got this problem from a long time and i got idea this is refresh sync to pal problem - when i install reclock soft movies go much smoother but i havent got any soft for sync refresh rate to pal in games - do you know any? maybe it is another solution for this problem? tia ad |
#2
|
|||
|
|||
On Sat, 24 Jan 2004 12:44:57 +0100, "ad" wrote:
i got problem with synchronization images on tv and monitor e.g. game on monitor runs ideally smooth on tv in clone mode same game got terrible hoops. i got this problem from a long time and i got idea this is refresh sync to pal problem - when i install reclock soft movies go much smoother but i havent got any soft for sync refresh rate to pal in games - do you know any? maybe it is another solution for this problem? tia ad There is no acceleration on the secondary display device when in clone mode. Also the performance of the primary display device takes a big hit as well!! Your problem sounds like the secondary device is not able to keep up with the primary device, for the reasons given above. From what I understand from RTFM in dualview mode BOTH devices will have hardware acceleration, how ever you will need a 3rd party util to sync the two displays. You could also try dropping your refresh rate on the primary display device. |
#3
|
|||
|
|||
There is no acceleration on the secondary display device when in clone
mode. Also the performance of the primary display device takes a big hit as well!! Your problem sounds like the secondary device is not able to keep up with the primary device, for the reasons given above. From what I understand from RTFM in dualview mode BOTH devices will have hardware acceleration, how ever you will need a 3rd party util to sync the two displays. You could also try dropping your refresh rate on the primary display device. well i already try dualview and it is exactly the same problem like with cloning. i was experimenting with various refresh rates and it doesnt help - i even drop with my refresh rate to 50Hz and even then i havent got this problem solved. i read reclock software readme and i found that video stream must be "live" synchronized to pal display. i just cant find any soft able to do it. |
#4
|
|||
|
|||
On Sun, 25 Jan 2004 07:36:01 +0100, "Ad" wrote:
There is no acceleration on the secondary display device when in clone mode. Also the performance of the primary display device takes a big hit as well!! Your problem sounds like the secondary device is not able to keep up with the primary device, for the reasons given above. From what I understand from RTFM in dualview mode BOTH devices will have hardware acceleration, how ever you will need a 3rd party util to sync the two displays. You could also try dropping your refresh rate on the primary display device. well i already try dualview and it is exactly the same problem like with cloning. i was experimenting with various refresh rates and it doesnt help - i even drop with my refresh rate to 50Hz and even then i havent got this problem solved. i read reclock software readme and i found that video stream must be "live" synchronized to pal display. i just cant find any soft able to do it. Have you tried clone mode with the TV as the primary display? In dualview mode no mirror options are avaliable as each device is independant with there own ouput planes so in order for a mirror system to work properley it must be supported by the host application. |
#5
|
|||
|
|||
Have you tried clone mode with the TV as the primary display?
hmm i think i forgot. i'll try it when i come back home .thnx In dualview mode no mirror options are avaliable as each device is independant with there own ouput planes so in order for a mirror system to work properley it must be supported by the host application. later i try to sewt up dual view - maybe it is mode that i need regards |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help needed with unidentified problem | ^MisterJingo^ | General | 3 | November 23rd 04 05:45 AM |
ATI Radeon 8500 problem (or the ViewSonice A90f+ monitor problem)?? | T.T. | Ati Videocards | 0 | October 9th 04 07:19 PM |
Mouse Problem | Jeff | Homebuilt PC's | 0 | October 1st 04 06:44 AM |
not the same old B&W problem (I don't think) | Brian Lee | Ati Videocards | 0 | July 9th 04 01:15 AM |
Directx Problem Solved | Me | Nvidia Videocards | 1 | August 23rd 03 06:32 AM |