If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
9700 Pro and certain racing games stopped working
Hi guys, hope some one can shed some light on a little problem I've
developed. Done some searching around but can't find anything about this particular problem. Firstly, the setup Abit NF7S-V2.0 mobo XP3200+ CPU 1GB Crucial PC3200 Radeon 9700 Pro 3x160GB Hard drives 1xIDE 2xSATA Up until a few days ago everything as running smooth as silk. No issues at all, I then decide to play a couple of games I've not played in a while. Need For Speed Underground 2 and Toca Race Driver 2. Neither games are playable anymore. Front ends load fine, but when you get into a race, FPS have dropped to 0. It's unplayable, the countdown from 3 to start a race can take 20-30 seconds. This doesn't happen in any other game, I've checked other racing games (Colin McRae 2004) and that works fine. All drivers are up to date, I've unistalled drivers and tried vid drivers 4.10 thru 5.2, each time clearing out the old ones thoroughly first. I've updated and checked DX, it's already got 9.0c installed, run through dxdiag with no problems found. I've unistalled games, installed to new locations, made sure they're updated with latest patches. Nothing works. Every other game I play works flawlessly, I've made no hardware changes or additions to the base unit in months, apart from adding a 19" LCD monitor to replace my old 19" CRT one. But that shouldn't cause any issues. It's a fast response monitor 16ms, and like I say everything else works flawlessly. No problems with the games I play most, BF1942, BFV, HL2, Doom 3, The Sims 2. I just can't find any reason for this happening, I've tried everything I can think of. Made every possible change in the vid card settings, turned off all AA and AF. Has anyone else come across the same problem? Cheers H |
#2
|
|||
|
|||
Heckler wrote:
Hi guys, hope some one can shed some light on a little problem I've developed. Done some searching around but can't find anything about this particular problem. Firstly, the setup Abit NF7S-V2.0 mobo XP3200+ CPU 1GB Crucial PC3200 Radeon 9700 Pro 3x160GB Hard drives 1xIDE 2xSATA Up until a few days ago everything as running smooth as silk. No issues at all, I then decide to play a couple of games I've not played in a while. Need For Speed Underground 2 and Toca Race Driver 2. Neither games are playable anymore. Front ends load fine, but when you get into a race, FPS have dropped to 0. It's unplayable, the countdown from 3 to start a race can take 20-30 seconds. This doesn't happen in any other game, I've checked other racing games (Colin McRae 2004) and that works fine. All drivers are up to date, I've unistalled drivers and tried vid drivers 4.10 thru 5.2, each time clearing out the old ones thoroughly first. I've updated and checked DX, it's already got 9.0c installed, run through dxdiag with no problems found. I've unistalled games, installed to new locations, made sure they're updated with latest patches. Nothing works. Every other game I play works flawlessly, I've made no hardware changes or additions to the base unit in months, apart from adding a 19" LCD monitor to replace my old 19" CRT one. But that shouldn't cause any issues. It's a fast response monitor 16ms, and like I say everything else works flawlessly. No problems with the games I play most, BF1942, BFV, HL2, Doom 3, The Sims 2. I just can't find any reason for this happening, I've tried everything I can think of. Made every possible change in the vid card settings, turned off all AA and AF. Has anyone else come across the same problem? Cheers H Hmm...I can't come up with a solution for you. All I can do is verify that TOCA Race Driver 2 does play fine with a 9700Pro. I don't own NFS-U2. (In other words, there is no software incompatibility). The only thing that I can think of is that perhaps you're overclocking either the vidcard or your system and these games don't like it? Good Luck. |
#3
|
|||
|
|||
BRH wrote:
Heckler wrote: Hi guys, hope some one can shed some light on a little problem I've developed. Done some searching around but can't find anything about this particular problem. Firstly, the setup Abit NF7S-V2.0 mobo XP3200+ CPU 1GB Crucial PC3200 Radeon 9700 Pro 3x160GB Hard drives 1xIDE 2xSATA Up until a few days ago everything as running smooth as silk. No issues at all, I then decide to play a couple of games I've not played in a while. Need For Speed Underground 2 and Toca Race Driver 2. Neither games are playable anymore. Front ends load fine, but when you get into a race, FPS have dropped to 0. It's unplayable, the countdown from 3 to start a race can take 20-30 seconds. This doesn't happen in any other game, I've checked other racing games (Colin McRae 2004) and that works fine. All drivers are up to date, I've unistalled drivers and tried vid drivers 4.10 thru 5.2, each time clearing out the old ones thoroughly first. I've updated and checked DX, it's already got 9.0c installed, run through dxdiag with no problems found. I've unistalled games, installed to new locations, made sure they're updated with latest patches. Nothing works. Every other game I play works flawlessly, I've made no hardware changes or additions to the base unit in months, apart from adding a 19" LCD monitor to replace my old 19" CRT one. But that shouldn't cause any issues. It's a fast response monitor 16ms, and like I say everything else works flawlessly. No problems with the games I play most, BF1942, BFV, HL2, Doom 3, The Sims 2. I just can't find any reason for this happening, I've tried everything I can think of. Made every possible change in the vid card settings, turned off all AA and AF. Has anyone else come across the same problem? Cheers H Hmm...I can't come up with a solution for you. All I can do is verify that TOCA Race Driver 2 does play fine with a 9700Pro. I don't own NFS-U2. (In other words, there is no software incompatibility). The only thing that I can think of is that perhaps you're overclocking either the vidcard or your system and these games don't like it? Good Luck. Both these games worked perfectly before Xmas, and apart from adding a plug and play LCD monitor I've made no changes. Nothing else is affected including Colin McRae 2004 which I believe uses the same game engine as Race Driver 2. It's baffled me, I've made no hardware changes at all, the only thing I can possibly think it might be is something I've installed... Like MS updates for XP Pro. Vid card isn't overclocked, neither is the system I've tried it with and without overclocking to test. Same results. H |
#4
|
|||
|
|||
Heckler wrote:
BRH wrote: Heckler wrote: Hi guys, hope some one can shed some light on a little problem I've developed. Done some searching around but can't find anything about this particular problem. Firstly, the setup Abit NF7S-V2.0 mobo XP3200+ CPU 1GB Crucial PC3200 Radeon 9700 Pro 3x160GB Hard drives 1xIDE 2xSATA Up until a few days ago everything as running smooth as silk. No issues at all, I then decide to play a couple of games I've not played in a while. Need For Speed Underground 2 and Toca Race Driver 2. Neither games are playable anymore. Front ends load fine, but when you get into a race, FPS have dropped to 0. It's unplayable, the countdown from 3 to start a race can take 20-30 seconds. This doesn't happen in any other game, I've checked other racing games (Colin McRae 2004) and that works fine. All drivers are up to date, I've unistalled drivers and tried vid drivers 4.10 thru 5.2, each time clearing out the old ones thoroughly first. I've updated and checked DX, it's already got 9.0c installed, run through dxdiag with no problems found. I've unistalled games, installed to new locations, made sure they're updated with latest patches. Nothing works. Every other game I play works flawlessly, I've made no hardware changes or additions to the base unit in months, apart from adding a 19" LCD monitor to replace my old 19" CRT one. But that shouldn't cause any issues. It's a fast response monitor 16ms, and like I say everything else works flawlessly. No problems with the games I play most, BF1942, BFV, HL2, Doom 3, The Sims 2. I just can't find any reason for this happening, I've tried everything I can think of. Made every possible change in the vid card settings, turned off all AA and AF. Has anyone else come across the same problem? Cheers H Hmm...I can't come up with a solution for you. All I can do is verify that TOCA Race Driver 2 does play fine with a 9700Pro. I don't own NFS-U2. (In other words, there is no software incompatibility). The only thing that I can think of is that perhaps you're overclocking either the vidcard or your system and these games don't like it? Good Luck. Both these games worked perfectly before Xmas, and apart from adding a plug and play LCD monitor I've made no changes. Nothing else is affected including Colin McRae 2004 which I believe uses the same game engine as Race Driver 2. It's baffled me, I've made no hardware changes at all, the only thing I can possibly think it might be is something I've installed... Like MS updates for XP Pro. Vid card isn't overclocked, neither is the system I've tried it with and without overclocking to test. Same results. H Sorry, but I'm out of possibilities. Have you tried posting this question on rec.autos.simulators? |
#5
|
|||
|
|||
BRH wrote:
Heckler wrote: BRH wrote: Heckler wrote: Hi guys, hope some one can shed some light on a little problem I've developed. Done some searching around but can't find anything about this particular problem. Firstly, the setup Abit NF7S-V2.0 mobo XP3200+ CPU 1GB Crucial PC3200 Radeon 9700 Pro 3x160GB Hard drives 1xIDE 2xSATA Up until a few days ago everything as running smooth as silk. No issues at all, I then decide to play a couple of games I've not played in a while. Need For Speed Underground 2 and Toca Race Driver 2. Neither games are playable anymore. Front ends load fine, but when you get into a race, FPS have dropped to 0. It's unplayable, the countdown from 3 to start a race can take 20-30 seconds. This doesn't happen in any other game, I've checked other racing games (Colin McRae 2004) and that works fine. All drivers are up to date, I've unistalled drivers and tried vid drivers 4.10 thru 5.2, each time clearing out the old ones thoroughly first. I've updated and checked DX, it's already got 9.0c installed, run through dxdiag with no problems found. I've unistalled games, installed to new locations, made sure they're updated with latest patches. Nothing works. Every other game I play works flawlessly, I've made no hardware changes or additions to the base unit in months, apart from adding a 19" LCD monitor to replace my old 19" CRT one. But that shouldn't cause any issues. It's a fast response monitor 16ms, and like I say everything else works flawlessly. No problems with the games I play most, BF1942, BFV, HL2, Doom 3, The Sims 2. I just can't find any reason for this happening, I've tried everything I can think of. Made every possible change in the vid card settings, turned off all AA and AF. Has anyone else come across the same problem? Cheers H Hmm...I can't come up with a solution for you. All I can do is verify that TOCA Race Driver 2 does play fine with a 9700Pro. I don't own NFS-U2. (In other words, there is no software incompatibility). The only thing that I can think of is that perhaps you're overclocking either the vidcard or your system and these games don't like it? Good Luck. Both these games worked perfectly before Xmas, and apart from adding a plug and play LCD monitor I've made no changes. Nothing else is affected including Colin McRae 2004 which I believe uses the same game engine as Race Driver 2. It's baffled me, I've made no hardware changes at all, the only thing I can possibly think it might be is something I've installed... Like MS updates for XP Pro. Vid card isn't overclocked, neither is the system I've tried it with and without overclocking to test. Same results. H Sorry, but I'm out of possibilities. Have you tried posting this question on rec.autos.simulators? Just fixed it for Race Driver 2... I don't know how it happened, but seems the cause was the save game. I created a new profile and it's working perfectly.... Gotta start again though, my previous save was 91% complete. Gonna try the same thing later with NFSU2, but for now, I've got some Toca'ing to do. H |
Thread Tools | |
Display Modes | |
|
|