If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Where can I download gigabyte utilities for my mb?
My cd is faulty, and my provider seems to be quite dumb, so I need to
download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. |
#2
|
|||
|
|||
jm wrote:
My cd is faulty, and my provider seems to be quite dumb, so I need to download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. Maybe here?: http://www.giga-byte.com/ |
#3
|
|||
|
|||
"sig666" escribió en el mensaje k.net... jm wrote: My cd is faulty, and my provider seems to be quite dumb, so I need to download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. Maybe here?: http://www.giga-byte.com/ absolutely not, try to search for the Gigabyte Windows Utilities Manager, or de Gigabyte Management Tool, or de DMI Viewer or the Silicon Sata Raid Utility, or the Raid utility for GigaRAID. This programs are in the mb cd, but they ARE NOT on gigabytes web. |
#4
|
|||
|
|||
"jm" wrote in message
"sig666" escribió en el mensaje k.net... jm wrote: My cd is faulty, and my provider seems to be quite dumb, so I need to download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. Maybe here?: http://www.giga-byte.com/ absolutely not, try to search for the Gigabyte Windows Utilities Manager, or de Gigabyte Management Tool, or de DMI Viewer or the Silicon Sata Raid Utility, or the Raid utility for GigaRAID. This programs are in the mb cd, but they ARE NOT on gigabytes web. This is normal behaviour for many manufacturers - software on CD (only) available to buyers only. However, Easytune 4 can be downloaded from their Taiwan web site. However, your supplier should be able to burn a copy for ya, no? |
#5
|
|||
|
|||
This is normal behaviour for many manufacturers - software on CD (only) available to buyers only. However, Easytune 4 can be downloaded from their Taiwan web site. However, your supplier should be able to burn a copy for ya, no? well, this is the question, they should be able, of course but their stupid working protocol must say something like this: 1- If a client reclaims a faulty mb drivers cd give him another one. 2- If this client comes again with the same problem, ask him the motherboard to test it. My mb is fully installed in its box, and I don`t want to give it back to them, this is the stupid situation I am involved into. If someone could send me this software, I have a gmail account to send it to, and I have too one invitation left ... Greetings. |
#6
|
|||
|
|||
My experience is that most of the free utilities you refer to are useless
bloatware suitable for marketing purposes but not much else. You are probably missing out on a lot less than you think! "jm" wrote in message ... "sig666" escribió en el mensaje k.net... jm wrote: My cd is faulty, and my provider seems to be quite dumb, so I need to download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. Maybe here?: http://www.giga-byte.com/ absolutely not, try to search for the Gigabyte Windows Utilities Manager, or de Gigabyte Management Tool, or de DMI Viewer or the Silicon Sata Raid Utility, or the Raid utility for GigaRAID. This programs are in the mb cd, but they ARE NOT on gigabytes web. |
#7
|
|||
|
|||
I usually think like you about this kind of discs, but i am afraid the raid
utilities may be useful when I use the raid mode. "Kilgore Trout Jr" escribió en el mensaje nk.net... My experience is that most of the free utilities you refer to are useless bloatware suitable for marketing purposes but not much else. You are probably missing out on a lot less than you think! "jm" wrote in message ... "sig666" escribió en el mensaje k.net... jm wrote: My cd is faulty, and my provider seems to be quite dumb, so I need to download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. Maybe here?: http://www.giga-byte.com/ absolutely not, try to search for the Gigabyte Windows Utilities Manager, or de Gigabyte Management Tool, or de DMI Viewer or the Silicon Sata Raid Utility, or the Raid utility for GigaRAID. This programs are in the mb cd, but they ARE NOT on gigabytes web. |
#8
|
|||
|
|||
Are you sure there are RAID utilities? My 8KNXP uses the same SI and ITE
controllers but came with no RAID utilities except one for the Intel chipset. All Silicon Image and ITE Giga RAID functions are available through the start-up screen if these controllers have been enabled in the BIOS. As long as you were able to download the proper drivers for your OS, you should be good to go. Still sucks that you can't get a replacement disk from your retailer. "jm" wrote in message ... I usually think like you about this kind of discs, but i am afraid the raid utilities may be useful when I use the raid mode. "Kilgore Trout Jr" escribió en el mensaje nk.net... My experience is that most of the free utilities you refer to are useless bloatware suitable for marketing purposes but not much else. You are probably missing out on a lot less than you think! "jm" wrote in message ... "sig666" escribió en el mensaje k.net... jm wrote: My cd is faulty, and my provider seems to be quite dumb, so I need to download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. Maybe here?: http://www.giga-byte.com/ absolutely not, try to search for the Gigabyte Windows Utilities Manager, or de Gigabyte Management Tool, or de DMI Viewer or the Silicon Sata Raid Utility, or the Raid utility for GigaRAID. This programs are in the mb cd, but they ARE NOT on gigabytes web. |
#9
|
|||
|
|||
Are you sure there are RAID utilities? it says so in the manual of the board, page 83 My 8KNXP uses the same SI and ITE controllers but came with no RAID utilities except one for the Intel chipset. All Silicon Image and ITE Giga RAID functions are available through the start-up screen if these controllers have been enabled in the BIOS. As long as you were able to download the proper drivers for your OS, you should be good to go. Still sucks that you can't get a replacement disk from your retailer. it really sucks, they have told me today that will search for a cd replacement after testing the faulty discs in their computers, it seems to be a whole bunch of defective discs, as they have tested three of them. I hope it will get solved in some days. BTW, are you using RAID?, in the manual it says that the drivers must be installed from the mb cd, that I could not do, I suppose that after installing the drivers from windows, the RAID will be fully recognized in case I clone my windows partition in order to boot from the RAID, but really I do not know for sure. "jm" wrote in message ... I usually think like you about this kind of discs, but i am afraid the raid utilities may be useful when I use the raid mode. "Kilgore Trout Jr" escribió en el mensaje nk.net... My experience is that most of the free utilities you refer to are useless bloatware suitable for marketing purposes but not much else. You are probably missing out on a lot less than you think! "jm" wrote in message ... "sig666" escribió en el mensaje k.net... jm wrote: My cd is faulty, and my provider seems to be quite dumb, so I need to download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. Maybe here?: http://www.giga-byte.com/ absolutely not, try to search for the Gigabyte Windows Utilities Manager, or de Gigabyte Management Tool, or de DMI Viewer or the Silicon Sata Raid Utility, or the Raid utility for GigaRAID. This programs are in the mb cd, but they ARE NOT on gigabytes web. |
#10
|
|||
|
|||
jm wrote: Are you sure there are RAID utilities? it says so in the manual of the board, page 83 My 8KNXP uses the same SI and ITE controllers but came with no RAID utilities except one for the Intel chipset. All Silicon Image and ITE Giga RAID functions are available through the start-up screen if these controllers have been enabled in the BIOS. As long as you were able to download the proper drivers for your OS, you should be good to go. Still sucks that you can't get a replacement disk from your retailer. it really sucks, they have told me today that will search for a cd replacement after testing the faulty discs in their computers, it seems to be a whole bunch of defective discs, as they have tested three of them. I hope it will get solved in some days. BTW, are you using RAID?, in the manual it says that the drivers must be installed from the mb cd, that I could not do, I suppose that after installing the drivers from windows, the RAID will be fully recognized in case I clone my windows partition in order to boot from the RAID, but really I do not know for sure. "jm" wrote in message ... I usually think like you about this kind of discs, but i am afraid the raid utilities may be useful when I use the raid mode. "Kilgore Trout Jr" escribió en el mensaje hlink.net... My experience is that most of the free utilities you refer to are useless bloatware suitable for marketing purposes but not much else. You are probably missing out on a lot less than you think! "jm" wrote in message ... "sig666" escribió en el mensaje thlink.net... jm wrote: My cd is faulty, and my provider seems to be quite dumb, so I need to download the utilities (I have done with the drivers). My motherboard is a K8NS Pro. Greetings. Maybe here?: http://www.giga-byte.com/ absolutely not, try to search for the Gigabyte Windows Utilities Manager, or de Gigabyte Management Tool, or de DMI Viewer or the Silicon Sata Raid Utility, or the Raid utility for GigaRAID. This programs are in the mb cd, but they ARE NOT on gigabytes web. Howdy, They be here, newer than on the CD. Not cuurently using RAID Myself so I can't help You there. http://www.giga-byte.com/Motherboard...K8NS%20Pro.htm If this link doesn't woik - gp to Gigabyte's site and search on your board number Rick |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gigabyte GA-K8NSNXP-939 replacement | Chris | AMD x86-64 Processors | 12 | December 11th 04 06:52 AM |
Gigabyte GA-8I915P Duo A (socket 775) wont recognize anything connected to IDE2 or IDE3 channels | Dr Nick | Gigabyte Motherboards | 9 | September 7th 04 02:50 AM |
Superb Gigabyte support | Moritz Kürten | Gigabyte Motherboards | 7 | July 1st 04 09:20 AM |
Gigabyte driver update | Axl | Gigabyte Motherboards | 4 | December 28th 03 06:48 AM |
Is Gigabyte support just a sour joke? | Thorsten Helmerichs | Gigabyte Motherboards | 3 | October 25th 03 05:07 PM |