A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Asus Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

P4PE-Cold Boot issues?? Any answers.



 
 
Thread Tools Display Modes
  #1  
Old January 9th 04, 04:35 PM
seeker
external usenet poster
 
Posts: n/a
Default P4PE-Cold Boot issues?? Any answers.

Hi to all,

In the spring time I bought a new Asus P4PE which is equipped with:


MB is P4PE/LAN/1394/SATA-UAY
Bios V1002
512MG (single dimm) Crucial PC2700
Antec 550W Truepower PS
WD 80GB HD
Intel Boxed P4 2.4GH @ 533mHz
CDRW-Liteon
DVDRW-Sony510 or (swapped) PLextor 709A
Windows XP PRO with all patches updates.
MS optical mouse

For various reasons, the PC has hardly been used...perhaps on being
powered on for a total of 25 hours. It did always work perfectly.

In the last two weeks I had the following problems:

Occasionaly, on a Cold Boot (system was previously powered down by XP
for one or more days (but PS was still on (Green led on mobo ON) when
I started the system, the CPU fan DID spinup and stay up, but:

- no video
- no led activitiy on the HD case Led
-no led activity on the keyboard lLeds
- no beeps from POST (like bad video or similar)

In this situation, even powering off the system (by holding the case
Power button for 10 seconds) still did not permit the PC to boot if
the system was powered up again.

Even removing, waiting 1 minutes and then restoring AC power will
help.

However, after a powerup (that fails as described), pressed the HW
RESET on the case ALWAYS does get the system running again. But, may
cause the system to "pop into" the Bios Setup menu.

I've also noticed that on a normal startup, the PC speaker (on MB)
"chirps"...This is a sign that the boot will go well.

I've read LOTS of comments from users with similar issues , but
haven'tr seen any thing that helps...not even bios updates.

To me, it appears to be a "power up ?reset/power good" issues...maybe
the PS (swapped here but no help), or the Power-Up-circuitry on the MB
is not designed well.

Does anyone have input or further details, ideas etc.

Thanks




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Printer partially ejects on cold boot *Vanguard* General 3 May 15th 04 11:50 PM
Hard drive will not boot Dave General 1 March 9th 04 06:16 PM
random restarts from cold boot jf General 2 October 10th 03 06:01 AM
Hard drive that boots elsewhere refuses to boot in this machine Simon O'Connor General 9 July 22nd 03 06:34 AM
Dual Boot, How? Paul \(Erie\) General 1 June 24th 03 04:36 PM


All times are GMT +1. The time now is 11:28 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 HardwareBanter.
The comments are property of their posters.