A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Gigabyte Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

GA-K8NXP-SLI - warm re-boot problem



 
 
Thread Tools Display Modes
  #1  
Old February 6th 05, 12:03 AM
BillL
external usenet poster
 
Posts: n/a
Default GA-K8NXP-SLI - warm re-boot problem

Hi all,

Just installed the above board with a A64 3200+, Leadtek 6600GT Extreme, 2 x
512 PC4000 Dimm's (Crucial Ballistix) all powered by an Antec truepower 430
watt PSU.

I had a few problems setting up the system (mainly due to my lack of
experience with SATA etc.) but I've installed XP Pro and now its just a case
of spending some time getting the PC sorted.

However, there is one really annoying problem when performing a warm reboot
(e.g. when SW installers need to restart the PC) basically the PC will hang
at the point where the memory speed is displayed. This doesn't occur on
every re-boot and never (so far!) when starting the PC from cold. I thought
a BIOS upgrade may help but according to the Gigabyte site I'm already using
the latest BIOS (f6).

Anyone care to hazard what the problem is or has anyone experienced this?

TIA

BillL

BTW I'm using the Dual Power System - don't know if this makes a difference?


  #2  
Old February 20th 05, 08:18 PM
Shrek
external usenet poster
 
Posts: n/a
Default

Hi, I have expeienced these problems myself and found it to be when I
added my old hard drive (seagate 100 ata) to the ide slot. Once I
removed them everything ran ok

Hope that helps

Rob

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
P4C800-E motherboard - problem with cold boot seeing the IDE hard drive. Kelly Greer Asus Motherboards 1 June 7th 04 09:24 PM
HELP! Boot problem after enabling then disabling RAID Promise onP4PE Ken Krone Asus Motherboards 4 June 6th 04 06:53 AM
Disk Boot Failure problem atDFN General 2 February 8th 04 07:51 PM
P4PE cold boot problem resolved? Russell Keating Asus Motherboards 0 November 15th 03 06:13 PM
P4B266-C Boot Problem - Won't Scan Boot Devices Parallax Abstraction Asus Motherboards 2 November 15th 03 12:03 AM


All times are GMT +1. The time now is 06:08 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.