If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Can't get CD Burner to Burn
This burner, don't know what brand really, 48x16x48, suddenly stopped
burning CDR's . Here's the log report. Any deciphering help would be appreciated. The process starts and then at 51% it tanks and starts spitting out errors. Log from Nero Express 5.5.10 Windows 2000 5.0 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'E:\Utilities\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 9:37:36 PM Nero Version: 5.5.10.50 (Nero Express) Recorder: ATAPI CD-R/RW 48X16 Version: 9.EK - HA 1 TA 0 - 5.5.10.50 Adapter driver: atapi HA 1 Drive buffer : 2048kB Bus Type : default (0) - ATAPI, detected: ATAPI CD-ROM: TEAC CD-524E Version: 3.0C - HA 1 TA 1 - 5.5.10.50 Adapter driver: atapi HA 1 Bus Type : default (0) - ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 51536H2 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : ATAPI CD-R/RW 48X16 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC CD-524E atapi Port 1 ID 1 DMA: Off : UPATC Port 2 ID 0 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 78643200 (78643200) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 333MB (341376kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: Off 21.12.2003 CD-ROM (ISO) 11:18:43 PM #1 Text 0 File Isodoc.cpp, Line 7589 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:18:44 PM #2 Phase 87 File dlgbrnst.cpp, Line 1655 Seamless Link activated 11:18:44 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 11:18:44 PM #4 Text 0 File Writer.cpp, Line 125 Writer ATAPI CD-R/RW 48X16 running 11:18:44 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 11:18:44 PM #6 Text 0 File Burncd.cpp, Line 3744 Turn on Track-At-Once, using CD-R/RW media 11:18:44 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 8937 (8937) = #8937/1:59.12 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 11:19:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 359847 (79:59.72) Last address to be written: 18017 ( 4:02.17) 11:19:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 11:19:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 1693 Recorder: ATAPI CD-R/RW 48X16; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 11:19:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder ATAPI CD-R/RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 2 to 2: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 18610176 11:19:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852 Removed 2 run-out blocks from end of track 2. 11:19:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 8937 (8937) = #8937/1:59.12 relocatable, CD pos for caching/writing not required/required, no patch infos - TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 8935 blocks [ATAPI CD-R/RW 48X16 ] -------------------------------------------------------------- 11:19:14 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 11:19:15 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 11:19:15 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 48x (7,200 KB/s) 11:19:15 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #9081 11:19:15 PM #18 Text 0 File Mmc.cpp, Line 18938 Set BUFE: Seamless Link - ON 11:19:54 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02580000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x23 0x79 0x00 0x00 0x1F 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 11:19:54 PM #20 MMC -1106 File Writer.cpp, Line 333 Power calibration error 11:19:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 11:19:54 PM #22 CDR -201 File WriterStatus.cpp, Line 194 Invalid write state 11:19:54 PM #23 TRANSFER -18 File WriterStatus.cpp, Line 194 Could not perform EndTrack 11:19:54 PM #24 Text 0 File Mmc.cpp, Line 13927 ATAPI CD-R/RW 48X16 start Close Session 11:21:08 PM #25 SCSI -1093 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0xFF CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0xFF 11:21:08 PM #26 MMC -1093 File WriterStatus.cpp, Line 233 No seek complete 11:21:08 PM #27 TRANSFER -19 File WriterStatus.cpp, Line 233 Could not perform Fixation 11:21:08 PM #28 Text 0 File WriterStatus.cpp, Line 242 falling back to disc fixation 11:21:08 PM #29 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 48x (7,200 KB/s) 11:21:09 PM #30 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (098), size=52816 bytes, created 11/4/2001 10:38:25 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1036), size=22265 bytes, created 10/5/2000 1:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) -- -- Member Business Sources - Beaverton Oregon Ethical, Resourceful Professionals at Your Service Since 1992 www.BusinessSources.net |
#2
|
|||
|
|||
Hi Nottoman,
I had the same kind of problem a while ago with a Liteon burner, I found that after cleaning the laser lens with a cleaning CD and lowering the writing speed to 16 speed gave this writer a new lease of life, as it was on a collision course with the bin. Might be worth trying.? -- Snoop¥ ²°°³ Cut ¬THE CRAP¬ To Reply. Outgoing mail is certified Virus Free. Checked by McAfee anti-virus system www.mcafee.com Version: 7.03.6000 Scan Engine 4.2.60 Virus Database: 4310 - Release Date: 22/12/2003. "Nottoman" wrote in message ... This burner, don't know what brand really, 48x16x48, suddenly stopped burning CDR's . Here's the log report. Any deciphering help would be appreciated. The process starts and then at 51% it tanks and starts spitting out errors. Log from Nero Express 5.5.10 Windows 2000 5.0 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'E:\Utilities\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 9:37:36 PM Nero Version: 5.5.10.50 (Nero Express) Recorder: ATAPI CD-R/RW 48X16 Version: 9.EK - HA 1 TA 0 - 5.5.10.50 Adapter driver: atapi HA 1 Drive buffer : 2048kB Bus Type : default (0) - ATAPI, detected: ATAPI CD-ROM: TEAC CD-524E Version: 3.0C - HA 1 TA 1 - 5.5.10.50 Adapter driver: atapi HA 1 Bus Type : default (0) - ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 51536H2 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : ATAPI CD-R/RW 48X16 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC CD-524E atapi Port 1 ID 1 DMA: Off : UPATC Port 2 ID 0 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 78643200 (78643200) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 333MB (341376kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: Off 21.12.2003 CD-ROM (ISO) 11:18:43 PM #1 Text 0 File Isodoc.cpp, Line 7589 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:18:44 PM #2 Phase 87 File dlgbrnst.cpp, Line 1655 Seamless Link activated 11:18:44 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 11:18:44 PM #4 Text 0 File Writer.cpp, Line 125 Writer ATAPI CD-R/RW 48X16 running 11:18:44 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 11:18:44 PM #6 Text 0 File Burncd.cpp, Line 3744 Turn on Track-At-Once, using CD-R/RW media 11:18:44 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 8937 (8937) = #8937/1:59.12 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 11:19:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 359847 (79:59.72) Last address to be written: 18017 ( 4:02.17) 11:19:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 11:19:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 1693 Recorder: ATAPI CD-R/RW 48X16; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 11:19:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder ATAPI CD-R/RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 2 to 2: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 18610176 11:19:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852 Removed 2 run-out blocks from end of track 2. 11:19:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 8937 (8937) = #8937/1:59.12 relocatable, CD pos for caching/writing not required/required, no patch infos - TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 8935 blocks [ATAPI CD-R/RW 48X16 ] -------------------------------------------------------------- 11:19:14 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 11:19:15 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 11:19:15 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 48x (7,200 KB/s) 11:19:15 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #9081 11:19:15 PM #18 Text 0 File Mmc.cpp, Line 18938 Set BUFE: Seamless Link - ON 11:19:54 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02580000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x23 0x79 0x00 0x00 0x1F 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 11:19:54 PM #20 MMC -1106 File Writer.cpp, Line 333 Power calibration error 11:19:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 11:19:54 PM #22 CDR -201 File WriterStatus.cpp, Line 194 Invalid write state 11:19:54 PM #23 TRANSFER -18 File WriterStatus.cpp, Line 194 Could not perform EndTrack 11:19:54 PM #24 Text 0 File Mmc.cpp, Line 13927 ATAPI CD-R/RW 48X16 start Close Session 11:21:08 PM #25 SCSI -1093 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0xFF CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0xFF 11:21:08 PM #26 MMC -1093 File WriterStatus.cpp, Line 233 No seek complete 11:21:08 PM #27 TRANSFER -19 File WriterStatus.cpp, Line 233 Could not perform Fixation 11:21:08 PM #28 Text 0 File WriterStatus.cpp, Line 242 falling back to disc fixation 11:21:08 PM #29 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 48x (7,200 KB/s) 11:21:09 PM #30 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (098), size=52816 bytes, created 11/4/2001 10:38:25 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1036), size=22265 bytes, created 10/5/2000 1:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) -- -- Member Business Sources - Beaverton Oregon Ethical, Resourceful Professionals at Your Service Since 1992 www.BusinessSources.net |
#3
|
|||
|
|||
Thanks! This problem is posted all over the web. Glad to find someone who
solved it. This is a pretty cheap CDRW so I'm sure it's going by the wayside. Many thanks again Nottoman "Snoop¥ ²°°³" wrote in message ... Hi Nottoman, I had the same kind of problem a while ago with a Liteon burner, I found that after cleaning the laser lens with a cleaning CD and lowering the writing speed to 16 speed gave this writer a new lease of life, as it was on a collision course with the bin. Might be worth trying.? -- Snoop¥ ²°°³ Cut ¬THE CRAP¬ To Reply. Outgoing mail is certified Virus Free. Checked by McAfee anti-virus system www.mcafee.com Version: 7.03.6000 Scan Engine 4.2.60 Virus Database: 4310 - Release Date: 22/12/2003. "Nottoman" wrote in message ... This burner, don't know what brand really, 48x16x48, suddenly stopped burning CDR's . Here's the log report. Any deciphering help would be appreciated. The process starts and then at 51% it tanks and starts spitting out errors. Log from Nero Express 5.5.10 Windows 2000 5.0 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'E:\Utilities\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 9:37:36 PM Nero Version: 5.5.10.50 (Nero Express) Recorder: ATAPI CD-R/RW 48X16 Version: 9.EK - HA 1 TA 0 - 5.5.10.50 Adapter driver: atapi HA 1 Drive buffer : 2048kB Bus Type : default (0) - ATAPI, detected: ATAPI CD-ROM: TEAC CD-524E Version: 3.0C - HA 1 TA 1 - 5.5.10.50 Adapter driver: atapi HA 1 Bus Type : default (0) - ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 51536H2 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : ATAPI CD-R/RW 48X16 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC CD-524E atapi Port 1 ID 1 DMA: Off : UPATC Port 2 ID 0 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 78643200 (78643200) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 333MB (341376kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: Off 21.12.2003 CD-ROM (ISO) 11:18:43 PM #1 Text 0 File Isodoc.cpp, Line 7589 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:18:44 PM #2 Phase 87 File dlgbrnst.cpp, Line 1655 Seamless Link activated 11:18:44 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 11:18:44 PM #4 Text 0 File Writer.cpp, Line 125 Writer ATAPI CD-R/RW 48X16 running 11:18:44 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 11:18:44 PM #6 Text 0 File Burncd.cpp, Line 3744 Turn on Track-At-Once, using CD-R/RW media 11:18:44 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 8937 (8937) = #8937/1:59.12 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 11:19:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 359847 (79:59.72) Last address to be written: 18017 ( 4:02.17) 11:19:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 11:19:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 1693 Recorder: ATAPI CD-R/RW 48X16; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 49 (LO 79:59.73) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 11:19:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder ATAPI CD-R/RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 2 to 2: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 18610176 11:19:14 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852 Removed 2 run-out blocks from end of track 2. 11:19:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 8937 (8937) = #8937/1:59.12 relocatable, CD pos for caching/writing not required/required, no patch infos - TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 8935 blocks [ATAPI CD-R/RW 48X16 ] -------------------------------------------------------------- 11:19:14 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 11:19:15 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 11:19:15 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 48x (7,200 KB/s) 11:19:15 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #9081 11:19:15 PM #18 Text 0 File Mmc.cpp, Line 18938 Set BUFE: Seamless Link - ON 11:19:54 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02580000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x23 0x79 0x00 0x00 0x1F 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 11:19:54 PM #20 MMC -1106 File Writer.cpp, Line 333 Power calibration error 11:19:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 11:19:54 PM #22 CDR -201 File WriterStatus.cpp, Line 194 Invalid write state 11:19:54 PM #23 TRANSFER -18 File WriterStatus.cpp, Line 194 Could not perform EndTrack 11:19:54 PM #24 Text 0 File Mmc.cpp, Line 13927 ATAPI CD-R/RW 48X16 start Close Session 11:21:08 PM #25 SCSI -1093 File Cdrdrv.cpp, Line 1241 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0xFF CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0xFF 11:21:08 PM #26 MMC -1093 File WriterStatus.cpp, Line 233 No seek complete 11:21:08 PM #27 TRANSFER -19 File WriterStatus.cpp, Line 233 Could not perform Fixation 11:21:08 PM #28 Text 0 File WriterStatus.cpp, Line 242 falling back to disc fixation 11:21:08 PM #29 Phase 38 File dlgbrnst.cpp, Line 1655 Burn process failed at 48x (7,200 KB/s) 11:21:09 PM #30 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (098), size=52816 bytes, created 11/4/2001 10:38:25 PM File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1036), size=22265 bytes, created 10/5/2000 1:00:00 AM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) -- -- Member Business Sources - Beaverton Oregon Ethical, Resourceful Professionals at Your Service Since 1992 www.BusinessSources.net |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question about dvd burner | Rambytes | General | 1 | December 14th 03 12:12 AM |
DVD Burner in 5 Year-old PC | Buck Turgidson | General | 3 | December 6th 03 06:58 PM |
Can't burn CD in Nero with new Pioneer DVR-106D | Witchsmeller Jason | General | 2 | November 23rd 03 03:39 PM |
CD & DVD burner on Primary/Secondary Master IDE channel | @drian | General | 2 | November 13th 03 09:59 AM |
Slow down CD burn? | jmazz | General | 2 | August 9th 03 02:18 PM |