A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » Motherboards » Abit Motherboards
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

AN7 boot code AF w/ channel 1 RAM



 
 
Thread Tools Display Modes
  #1  
Old August 25th 06, 02:49 PM posted to alt.comp.mainboards.abit
Scott & Gayle
external usenet poster
 
Posts: 1
Default AN7 boot code AF w/ channel 1 RAM

I have an AN7 system that has been running for well over a year. Came
home to find it locked up. Rebooted to have it fail at code AF. I've
determined that any RAM installed in either of the first two slots
(channel 1) will trigger this. A single stick in the third slot
(channel 2) will allow it to boot up fine (albeit more slowly). I've
tried different RAM, upping the RAM voltage a notch, and making the RAM
timing more conservative than STD, to no avail. Anyone else ever
experience this? Sound like a MB failure or could it be attributed to
CMOS/BIOS corruption?

Scott
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Boot.ini question Dave C. Storage (alternative) 208 February 10th 06 12:30 AM
W2K boot drive - unable to mount Mediamon Storage (alternative) 5 December 18th 05 08:18 PM
The Adaptec curse or why can't I boot from an SCSI cdrom Montana Pete Asus Motherboards 10 June 5th 05 12:46 AM
Overcoming 8GB BIOS limit Michael Storage (alternative) 93 March 3rd 05 12:22 PM
Asus A7N8X-X and AMD Athlon XP 3200+ Information Scavenger Asus Motherboards 30 November 9th 04 10:30 PM


All times are GMT +1. The time now is 09:48 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.