A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Can I virtually restore a PC?



 
 
Thread Tools Display Modes
  #1  
Old April 16th 19, 05:41 AM posted to alt.comp.hardware.pc-homebuilt
RayLopez99
external usenet poster
 
Posts: 873
Default Can I virtually restore a PC?

Here's my dilemma: I want to recover some photos on my girl's now dead laptop (she spilled coffee in it, typical girl hehe). I have a backup. The laptop was a x63 Windows 10 system with an AMD chip that was 'soldered on', the modern trend where nothing is fixable, and the PC repair guy said it's not worth repairing (he actually got it to work before it completely died, but it had problems ever since the coffee spill that never went away, like some sort of residue was literally gumming up the mobo, possibly spraying some solvent on it would have helped, but I digress). I got a system with lots of RAM, also x64 Win 10, and I run Oracle VirtualBox. So is it possible to somehow virtually restore this dead laptop on VirtualBox? I could of course do a physical restore on my new laptop, get the photos, then restore back to my image file. Just wondering if there's another way. I hate restoring hard drives from image files since I always fear something bad will happen, though so far in the half dozen times I've done it nothing has.

RL
  #2  
Old April 16th 19, 06:54 AM posted to alt.comp.hardware.pc-homebuilt
Paul[_28_]
external usenet poster
 
Posts: 965
Default Can I virtually restore a PC?

RayLopez99 wrote:
Here's my dilemma: I want to recover some photos on my girl's now dead laptop (she spilled coffee in it, typical girl hehe). I have a backup. The laptop was a x63 Windows 10 system with an AMD chip that was 'soldered on', the modern trend where nothing is fixable, and the PC repair guy said it's not worth repairing (he actually got it to work before it completely died, but it had problems ever since the coffee spill that never went away, like some sort of residue was literally gumming up the mobo, possibly spraying some solvent on it would have helped, but I digress). I got a system with lots of RAM, also x64 Win 10, and I run Oracle VirtualBox. So is it possible to somehow virtually restore this dead laptop on VirtualBox? I could of course do a physical restore on my new laptop, get the photos, then restore back to my image file. Just wondering if there's another way. I hate restoring hard drives from image files since I always fear something bad will happen, thou

gh so far in the half dozen times I've done it nothing has.

RL


What did you use for your backup ?

Chances are, you don't need to restore anything,
and the image file just needs to be mounted.

There are 20+ commercial backup tools, each different...

Paul
  #3  
Old April 16th 19, 06:59 AM posted to alt.comp.hardware.pc-homebuilt
Paul[_28_]
external usenet poster
 
Posts: 965
Default Can I virtually restore a PC?

Paul wrote:
RayLopez99 wrote:
Here's my dilemma: I want to recover some photos on my girl's now
dead laptop (she spilled coffee in it, typical girl hehe). I have a
backup. The laptop was a x63 Windows 10 system with an AMD chip that
was 'soldered on', the modern trend where nothing is fixable, and the
PC repair guy said it's not worth repairing (he actually got it to
work before it completely died, but it had problems ever since the
coffee spill that never went away, like some sort of residue was
literally gumming up the mobo, possibly spraying some solvent on it
would have helped, but I digress). I got a system with lots of RAM,
also x64 Win 10, and I run Oracle VirtualBox. So is it possible to
somehow virtually restore this dead laptop on VirtualBox? I could of
course do a physical restore on my new laptop, get the photos, then
restore back to my image file. Just wondering if there's another
way. I hate restoring hard drives from image files since I always
fear something bad will happen, thou

gh so far in the half dozen times I've done it nothing has.

RL


What did you use for your backup ?

Chances are, you don't need to restore anything,
and the image file just needs to be mounted.

There are 20+ commercial backup tools, each different...

Paul


You mention a modern trend.

Would this machine, perhaps, not have any backups at all ?

And you're asking how to get files off an eMMC flash
soldered to the motherboard ?

You see, the CPU soldered to the motherboard, I think you're
dropping a hint that this unit is "thin and light", and has
thus many compromises in terms of access.

When you know a new computer sucks with regard to this sort
of thing, backups are much more important.

Paul
  #4  
Old April 16th 19, 10:16 AM posted to alt.comp.hardware.pc-homebuilt
tumppiw[_2_]
external usenet poster
 
Posts: 10
Default Can I virtually restore a PC?

Paul kirjoitti 16.4.2019 klo 8.59:
Paul wrote:
RayLopez99 wrote:
Here's my dilemma:* I want to recover some photos on my girl's now
dead laptop (she spilled coffee in it, typical girl hehe).* I have a
backup.* The laptop was a x63 Windows 10 system with an AMD chip that
was 'soldered on', the modern trend where nothing is fixable, and the
PC repair guy said it's not worth repairing (he actually got it to
work before it completely died, but it had problems ever since the
coffee spill that never went away, like some sort of residue was
literally gumming up the mobo, possibly spraying some solvent on it
would have helped, but I digress).* I got a system with lots of RAM,
also x64 Win 10, and I run Oracle VirtualBox.* So is it possible to
somehow virtually restore this dead laptop on VirtualBox?* I could of
course do a physical restore on my new laptop, get the photos, then
restore back to my image file.* Just wondering if there's another
way.* I hate restoring hard drives from image files since I always
fear something bad will happen, thou

gh so far in the half dozen times I've done it nothing has.

RL


What did you use for your backup ?

Chances are, you don't need to restore anything,
and the image file just needs to be mounted.

There are 20+ commercial backup tools, each different...

** Paul


You mention a modern trend.

Would this machine, perhaps, not have any backups at all ?

And you're asking how to get files off an eMMC flash
soldered to the motherboard ?

You see, the CPU soldered to the motherboard, I think you're
dropping a hint that this unit is "thin and light", and has
thus many compromises in terms of access.

When you know a new computer sucks with regard to this sort
of thing, backups are much more important.

** Paul



What is the make/model of her laptop?
If it has a "normal" HDD, why not only take that of of it and connect to
your machine?
If it's a soldered eMMC, that might make it more problematical


--
-----------------------------------------------------
Thomas Wendell
Helsinki, Finland
Translation to/from FI/SWE not always accurate
-----------------------------------------------------
  #5  
Old April 18th 19, 12:12 AM posted to alt.comp.hardware.pc-homebuilt
RayLopez99
external usenet poster
 
Posts: 873
Default Can I virtually restore a PC?

On Tuesday, April 16, 2019 at 5:16:55 AM UTC-4, tumppiw wrote:
Paul kirjoitti 16.4.2019 klo 8.59:
Paul wrote:
RayLopez99 wrote:
Here's my dilemma:* I want to recover some photos on my girl's now
dead laptop (she spilled coffee in it, typical girl hehe).* I have a
backup.* The laptop was a x63 Windows 10 system with an AMD chip that
was 'soldered on', the modern trend where nothing is fixable, and the
PC repair guy said it's not worth repairing (he actually got it to
work before it completely died, but it had problems ever since the
coffee spill that never went away, like some sort of residue was
literally gumming up the mobo, possibly spraying some solvent on it
would have helped, but I digress).* I got a system with lots of RAM,
also x64 Win 10, and I run Oracle VirtualBox.* So is it possible to
somehow virtually restore this dead laptop on VirtualBox?* I could of
course do a physical restore on my new laptop, get the photos, then
restore back to my image file.* Just wondering if there's another
way.* I hate restoring hard drives from image files since I always
fear something bad will happen, thou
gh so far in the half dozen times I've done it nothing has.

RL

What did you use for your backup ?

Chances are, you don't need to restore anything,
and the image file just needs to be mounted.

There are 20+ commercial backup tools, each different...

** Paul


You mention a modern trend.

Would this machine, perhaps, not have any backups at all ?

And you're asking how to get files off an eMMC flash
soldered to the motherboard ?

You see, the CPU soldered to the motherboard, I think you're
dropping a hint that this unit is "thin and light", and has
thus many compromises in terms of access.

When you know a new computer sucks with regard to this sort
of thing, backups are much more important.

** Paul



What is the make/model of her laptop?
If it has a "normal" HDD, why not only take that of of it and connect to
your machine?
If it's a soldered eMMC, that might make it more problematical


--
-----------------------------------------------------
Thomas Wendell
Helsinki, Finland
Translation to/from FI/SWE not always accurate
-----------------------------------------------------


I see. Interesting. Well I'm not an expert with modern PC laptops but back in the day I've built towers and even soldered together ribbon cables, lol, but I think I can do what you ask, if I understood correctly. I will write what I understood below. From the two answers by Paul and tumppiw, I think there are two options on how to proceed.

On the first option, the backup program (to answer Paul) was Macrium Reflect Free (I think, from memory, unless I used that cheap Chinese software backup forget the name now starts with an A). So regarding Paul's option, I wonder, if I pay for the Macrium Reflect Pro (paid version) that perhaps I can 'mount' the Image file from inside of the Macrium Pro (paid) version software? I bet I can! I recall seeing such a feature advertised in their website...if so, this might be the easiest thing to do, assuming I used Macrium Free for the backup.

On the second option, to answer tumppiw, I guess I would need to connect the old mechanical HD to my system using a SATA cable, and power supply cable, then boot up with this HDD connected to the PC, but obviously in a secondary SATA slot not as the primary HDD (the "C:"), and what would happen? Even if it's got an OS in the boot sector, obviously as as secondary HDD it should show up renumbered as say the "D:" drive, right? Then, I go to the D: /Photos /Movies folders of this old mechanical HDD, copy what I want, power down, take the mechanical HD out of the PC, and done, right? Oh, that sounds so easy too!

Much appreciated if you can confirm the above two options, as they are a lot faster and easier than what I was planning to do.

RL
  #6  
Old April 18th 19, 03:41 AM posted to alt.comp.hardware.pc-homebuilt
Paul[_28_]
external usenet poster
 
Posts: 965
Default Can I virtually restore a PC?

RayLopez99 wrote:
On Tuesday, April 16, 2019 at 5:16:55 AM UTC-4, tumppiw wrote:
Paul kirjoitti 16.4.2019 klo 8.59:
Paul wrote:
RayLopez99 wrote:
Here's my dilemma: I want to recover some photos on my girl's now
dead laptop (she spilled coffee in it, typical girl hehe). I have a
backup. The laptop was a x63 Windows 10 system with an AMD chip that
was 'soldered on', the modern trend where nothing is fixable, and the
PC repair guy said it's not worth repairing (he actually got it to
work before it completely died, but it had problems ever since the
coffee spill that never went away, like some sort of residue was
literally gumming up the mobo, possibly spraying some solvent on it
would have helped, but I digress). I got a system with lots of RAM,
also x64 Win 10, and I run Oracle VirtualBox. So is it possible to
somehow virtually restore this dead laptop on VirtualBox? I could of
course do a physical restore on my new laptop, get the photos, then
restore back to my image file. Just wondering if there's another
way. I hate restoring hard drives from image files since I always
fear something bad will happen, thou
gh so far in the half dozen times I've done it nothing has.
RL
What did you use for your backup ?

Chances are, you don't need to restore anything,
and the image file just needs to be mounted.

There are 20+ commercial backup tools, each different...

Paul
You mention a modern trend.

Would this machine, perhaps, not have any backups at all ?

And you're asking how to get files off an eMMC flash
soldered to the motherboard ?

You see, the CPU soldered to the motherboard, I think you're
dropping a hint that this unit is "thin and light", and has
thus many compromises in terms of access.

When you know a new computer sucks with regard to this sort
of thing, backups are much more important.

Paul


What is the make/model of her laptop?
If it has a "normal" HDD, why not only take that of of it and connect to
your machine?
If it's a soldered eMMC, that might make it more problematical


--
-----------------------------------------------------
Thomas Wendell
Helsinki, Finland
Translation to/from FI/SWE not always accurate
-----------------------------------------------------


I see. Interesting. Well I'm not an expert with modern PC laptops but back in the day I've built towers and even soldered together ribbon cables, lol, but I think I can do what you ask, if I understood correctly. I will write what I understood below. From the two answers by Paul and tumppiw, I think there are two options on how to proceed.

On the first option, the backup program (to answer Paul) was Macrium Reflect Free (I think, from memory, unless I used that cheap Chinese software backup forget the name now starts with an A). So regarding Paul's option, I wonder, if I pay for the Macrium Reflect Pro (paid version) that perhaps I can 'mount' the Image file from inside of the Macrium Pro (paid) version software? I bet I can! I recall seeing such a feature advertised in their website...if so, this might be the easiest thing to do, assuming I used Macrium Free for the backup.

On the second option, to answer tumppiw, I guess I would need to connect the old mechanical HD to my system using a SATA cable, and power supply cable, then boot up with this HDD connected to the PC, but obviously in a secondary SATA slot not as the primary HDD (the "C:"), and what would happen? Even if it's got an OS in the boot sector, obviously as as secondary HDD it should show up renumbered as say the "D:" drive, right? Then, I go to the D: /Photos /Movies folders of this old mechanical HDD, copy what I want, power down, take the mechanical HD out of the PC, and done, right? Oh, that sounds so easy too!

Much appreciated if you can confirm the above two options, as they are a lot faster and easier than what I was planning to do.

RL


To "mount" an MRIMG in your possession, you could use:

1) Another Windows PC, install Macrium ReflectFree on it.
2) Connect backup drive with MRIMG on it.
3) Right-click the MRIMG file and examine the options offered.

You can change the drive letter it mounts as, then copy the
files out of the "virtual drive letter" it creates.

*******

The "old" drive from the broken laptop, can be connected to your
tower. It doesn't need a special port number or anything.
Any enabled SATA port would do (i.e. not turned off in the BIOS
for some reason). Master/slave means *nothing* to SATA. It's
a sham. One-drive goes with one-cable goes with one-port.
It's that simple.

When booting the computer, you check the boot order
in the BIOS, by opening the BIOS setup screen with the
key it tells you to use. The POST screen has a legend
at the bottom, which indicates (Asus)

Prsss del to enter BIOS

Press F8 for popup boot

The POST screen is only visible, if you disable the
manufacturer Splash Screen in the BIOS. (When the product
is new, you consult the user manual with regard to the
key press needed to enter the BIOS.)

Different products use different keys. The above is an example.

You can modify the boot order with the first key, and
make sure the "old" drive is not at the top of the list.

The F8 key presents a list of drives to boot from,
and you select the OS drive the computer normally
uses, rather than the "old" drive. The Popup boot key
is preferred for control purposes (as you can easily
steer the computer on every boot with it if you want).

Either method should cause your "regular" OS to boot.

Paul
  #7  
Old April 18th 19, 09:08 AM posted to alt.comp.hardware.pc-homebuilt
tumppiw[_2_]
external usenet poster
 
Posts: 10
Default Can I virtually restore a PC?

Paul kirjoitti 18.4.2019 klo 5.41:
RayLopez99 wrote:
On Tuesday, April 16, 2019 at 5:16:55 AM UTC-4, tumppiw wrote:
Paul kirjoitti 16.4.2019 klo 8.59:
Paul wrote:
RayLopez99 wrote:
Here's my dilemma:* I want to recover some photos on my girl's now
dead laptop (she spilled coffee in it, typical girl hehe).* I have
a backup.* The laptop was a x63 Windows 10 system with an AMD chip
that was 'soldered on', the modern trend where nothing is fixable,
and the PC repair guy said it's not worth repairing (he actually
got it to work before it completely died, but it had problems ever
since the coffee spill that never went away, like some sort of
residue was literally gumming up the mobo, possibly spraying some
solvent on it would have helped, but I digress).* I got a system
with lots of RAM, also x64 Win 10, and I run Oracle VirtualBox.
So is it possible to somehow virtually restore this dead laptop on
VirtualBox?* I could of course do a physical restore on my new
laptop, get the photos, then restore back to my image file.* Just
wondering if there's another way.* I hate restoring hard drives
from image files since I always fear something bad will happen, thou
gh so far in the half dozen times I've done it nothing has.
RL
What did you use for your backup ?

Chances are, you don't need to restore anything,
and the image file just needs to be mounted.

There are 20+ commercial backup tools, each different...

** Paul
You mention a modern trend.

Would this machine, perhaps, not have any backups at all ?

And you're asking how to get files off an eMMC flash
soldered to the motherboard ?

You see, the CPU soldered to the motherboard, I think you're
dropping a hint that this unit is "thin and light", and has
thus many compromises in terms of access.

When you know a new computer sucks with regard to this sort
of thing, backups are much more important.

*** Paul

What is the make/model of her laptop?
If it has a "normal" HDD, why not only take that of of it and connect
to your machine?
If it's a soldered eMMC, that might make it more problematical


--
-----------------------------------------------------
Thomas Wendell
Helsinki, Finland
Translation to/from FI/SWE not always accurate
-----------------------------------------------------


I see.* Interesting.* Well I'm not an expert with modern PC laptops
but back in the day I've built towers and even soldered together
ribbon cables, lol, but I think I can do what you ask, if I understood
correctly.* I will write what I understood below.* From the two
answers by Paul and tumppiw, I think there are two options on how to
proceed.
On the first option, the backup program (to answer Paul) was Macrium
Reflect Free (I think, from memory, unless I used that cheap Chinese
software backup forget the name now starts with an A).* So regarding
Paul's option, I wonder, if I pay for the Macrium Reflect Pro (paid
version) that perhaps I can 'mount' the Image file from inside of the
Macrium Pro (paid) version software?* I bet I can!* I recall seeing
such a feature advertised in their website...if so, this might be the
easiest thing to do, assuming I used Macrium Free for the backup.

On the second option, to answer tumppiw, I guess I would need to
connect the old mechanical HD to my system using a SATA cable, and
power supply cable, then boot up with this HDD connected to the PC,
but obviously in a secondary SATA slot not as the primary HDD (the
"C:"), and what would happen?* Even if it's got an OS in the boot
sector, obviously as as secondary HDD it should show up renumbered as
say the "D:" drive, right?* Then, I go to the D: /Photos /Movies
folders of this old mechanical HDD, copy what I want, power down, take
the mechanical HD out of the PC, and done, right?* Oh, that sounds so
easy too!

Much appreciated if you can confirm the above two options, as they are
a lot faster and easier than what I was planning to do.

RL


To "mount" an MRIMG in your possession, you could use:

1) Another Windows PC, install Macrium ReflectFree on it.
2) Connect backup drive with MRIMG on it.
3) Right-click the MRIMG file and examine the options offered.

You can change the drive letter it mounts as, then copy the
files out of the "virtual drive letter" it creates.

*******

The "old" drive from the broken laptop, can be connected to your
tower. It doesn't need a special port number or anything.
Any enabled SATA port would do (i.e. not turned off in the BIOS
for some reason). Master/slave means *nothing* to SATA. It's
a sham. One-drive goes with one-cable goes with one-port.
It's that simple.

When booting the computer, you check the boot order
in the BIOS, by opening the BIOS setup screen with the
key it tells you to use. The POST screen has a legend
at the bottom, which indicates (Asus)

** Prsss del to enter BIOS

** Press F8 for popup boot

The POST screen is only visible, if you disable the
manufacturer Splash Screen in the BIOS. (When the product
is new, you consult the user manual with regard to the
key press needed to enter the BIOS.)

Different products use different keys. The above is an example.

You can modify the boot order with the first key, and
make sure the "old" drive is not at the top of the list.

The F8 key presents a list of drives to boot from,
and you select the OS drive the computer normally
uses, rather than the "old" drive. The Popup boot key
is preferred for control purposes (as you can easily
steer the computer on every boot with it if you want).

Either method should cause your "regular" OS to boot.

** Paul



No you don't need the MacriumReflect Pro, the free version can do that..


--
-----------------------------------------------------
Thomas Wendell
Helsinki, Finland
Translation to/from FI/SWE not always accurate
-----------------------------------------------------
  #8  
Old April 18th 19, 01:16 PM posted to alt.comp.hardware.pc-homebuilt
Flasherly[_2_]
external usenet poster
 
Posts: 2,192
Default Can I virtually restore a PC?

On Mon, 15 Apr 2019 21:41:41 -0700 (PDT), RayLopez99
wrote:

I hate restoring hard drives from image files since I always fear
something bad will happen, though so farin the half dozen times I've
done it nothing has.

--

All I do is work with virtual files: binary-image stream restoration,
at its basic -- I do not do hibernation files, or various OS stream
files for loading up a programming development platform that runs
multiple operating systems from its imagery repository.

If you've a trashed laptop, that's that. If, and thus, you've a
working HD, to consequently salvage by pulling it from the otherwise
trashed laptop, that makes that: the trashed computer's HDD just works
if you can physically can make the interface.

Windows 10 is going to run with NT filesystem. Interface with that
HDD's filesystem, say from a USB docking station, with any version of
Windows, it will see it well enough to navigate to get what you want
from My Pictures. (If you have a rough and ready PC desktop handy,
run a SATA interface to the HDD, provided it's within your MB's
standards.)

An image restoration file is for an active HDD partition and booting
purposes. Microsoft has their Level securities, written into the core
of the OS, and low-level access is critically denied to some of their
files while it's running.

That is what causes the purpose of a binary-stream program: to get at
those protected files while the Microsoft is -Not- running. It's the
only thing that works with Microsoft, outside of Microsoft's own fun
and games and schemes.

Like everything, you, thus, must put on your FearLess T-Shirt.

Except know that it has gotten worse. Commercial, Peter Norton Ghost,
which Symantec bought when Peter Norton got out early, to leave it all
behind, was shortly after released as Symantec's Ghost ENTERPRISE. It
was the only imagery software, I'm aware, that you could go into and
physically edit an image.

But you're not doing that, booting into another OS platform,
fearlessly through a selective partition activation arbitrator,
commonly, off a floppy, USB, or optical device (with relative crap
imagery software compared to Ghost Enterprise).

What you're doing is copying pictures off a HDD. A relatively simple
operation, all else that can go wrong and doesn't considered.
  #9  
Old April 18th 19, 04:55 PM posted to alt.comp.hardware.pc-homebuilt
Paul[_28_]
external usenet poster
 
Posts: 965
Default Can I virtually restore a PC?

tumppiw wrote:
Paul kirjoitti 18.4.2019 klo 5.41:
RayLopez99 wrote:
On Tuesday, April 16, 2019 at 5:16:55 AM UTC-4, tumppiw wrote:
Paul kirjoitti 16.4.2019 klo 8.59:
Paul wrote:
RayLopez99 wrote:
Here's my dilemma: I want to recover some photos on my girl's
now dead laptop (she spilled coffee in it, typical girl hehe). I
have a backup. The laptop was a x63 Windows 10 system with an
AMD chip that was 'soldered on', the modern trend where nothing
is fixable, and the PC repair guy said it's not worth repairing
(he actually got it to work before it completely died, but it had
problems ever since the coffee spill that never went away, like
some sort of residue was literally gumming up the mobo, possibly
spraying some solvent on it would have helped, but I digress). I
got a system with lots of RAM, also x64 Win 10, and I run Oracle
VirtualBox. So is it possible to somehow virtually restore this
dead laptop on VirtualBox? I could of course do a physical
restore on my new laptop, get the photos, then restore back to my
image file. Just wondering if there's another way. I hate
restoring hard drives from image files since I always fear
something bad will happen, thou
gh so far in the half dozen times I've done it nothing has.
RL
What did you use for your backup ?

Chances are, you don't need to restore anything,
and the image file just needs to be mounted.

There are 20+ commercial backup tools, each different...

Paul
You mention a modern trend.

Would this machine, perhaps, not have any backups at all ?

And you're asking how to get files off an eMMC flash
soldered to the motherboard ?

You see, the CPU soldered to the motherboard, I think you're
dropping a hint that this unit is "thin and light", and has
thus many compromises in terms of access.

When you know a new computer sucks with regard to this sort
of thing, backups are much more important.

Paul

What is the make/model of her laptop?
If it has a "normal" HDD, why not only take that of of it and
connect to your machine?
If it's a soldered eMMC, that might make it more problematical


--
-----------------------------------------------------
Thomas Wendell
Helsinki, Finland
Translation to/from FI/SWE not always accurate
-----------------------------------------------------

I see. Interesting. Well I'm not an expert with modern PC laptops
but back in the day I've built towers and even soldered together
ribbon cables, lol, but I think I can do what you ask, if I
understood correctly. I will write what I understood below. From
the two answers by Paul and tumppiw, I think there are two options on
how to proceed.
On the first option, the backup program (to answer Paul) was Macrium
Reflect Free (I think, from memory, unless I used that cheap Chinese
software backup forget the name now starts with an A). So regarding
Paul's option, I wonder, if I pay for the Macrium Reflect Pro (paid
version) that perhaps I can 'mount' the Image file from inside of the
Macrium Pro (paid) version software? I bet I can! I recall seeing
such a feature advertised in their website...if so, this might be the
easiest thing to do, assuming I used Macrium Free for the backup.

On the second option, to answer tumppiw, I guess I would need to
connect the old mechanical HD to my system using a SATA cable, and
power supply cable, then boot up with this HDD connected to the PC,
but obviously in a secondary SATA slot not as the primary HDD (the
"C:"), and what would happen? Even if it's got an OS in the boot
sector, obviously as as secondary HDD it should show up renumbered as
say the "D:" drive, right? Then, I go to the D: /Photos /Movies
folders of this old mechanical HDD, copy what I want, power down,
take the mechanical HD out of the PC, and done, right? Oh, that
sounds so easy too!

Much appreciated if you can confirm the above two options, as they
are a lot faster and easier than what I was planning to do.

RL


To "mount" an MRIMG in your possession, you could use:

1) Another Windows PC, install Macrium ReflectFree on it.
2) Connect backup drive with MRIMG on it.
3) Right-click the MRIMG file and examine the options offered.

You can change the drive letter it mounts as, then copy the
files out of the "virtual drive letter" it creates.

*******

The "old" drive from the broken laptop, can be connected to your
tower. It doesn't need a special port number or anything.
Any enabled SATA port would do (i.e. not turned off in the BIOS
for some reason). Master/slave means *nothing* to SATA. It's
a sham. One-drive goes with one-cable goes with one-port.
It's that simple.

When booting the computer, you check the boot order
in the BIOS, by opening the BIOS setup screen with the
key it tells you to use. The POST screen has a legend
at the bottom, which indicates (Asus)

Prsss del to enter BIOS

Press F8 for popup boot

The POST screen is only visible, if you disable the
manufacturer Splash Screen in the BIOS. (When the product
is new, you consult the user manual with regard to the
key press needed to enter the BIOS.)

Different products use different keys. The above is an example.

You can modify the boot order with the first key, and
make sure the "old" drive is not at the top of the list.

The F8 key presents a list of drives to boot from,
and you select the OS drive the computer normally
uses, rather than the "old" drive. The Popup boot key
is preferred for control purposes (as you can easily
steer the computer on every boot with it if you want).

Either method should cause your "regular" OS to boot.

Paul



No you don't need the MacriumReflect Pro, the free version can do that..


What the paid version gives you is "incremental backups".

The free one does "full backups" and "differential backups".

And for most people, even an infrequent "full" is
better than nothing at all.

There's a table with the capabilities.

https://www.macrium.com/reflectfree

Paul
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
John McAfee's New Product Aims To Make Internet Users Virtually Untraceable Johnny General 0 October 2nd 13 06:45 PM
Lots of Ink, virtually nothing visible on copy Rex's Mom Printers 7 April 3rd 08 05:58 PM
Restore Thomas Kenyon UK Computer Vendors 0 April 20th 06 02:40 PM
how to get restore cds? michael e dziatkowicz Gateway Computers 5 March 11th 05 06:28 PM
Restore CD-RW Reg Cdr 4 May 28th 04 03:59 AM


All times are GMT +1. The time now is 07:59 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2004-2019 HardwareBanter.
The comments are property of their posters.