If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
AV8 Pro Mobo Won't post
I have built a brand new system with an Abit AV8 pro motherboard and an
Athlon 64 3000+ Venice skt 939 and it will not post. I have tried everything including different ram and vga cards etc. also clearing the cmos. There are no other items connected and it still does the same. I get the guru code 9.0 on the motherboard display which is where the bios should take over and then it starts a two tone beeping sound like a siren! I have no way of testing the cpu on another board. Could it be the Bios? HELP!! Abit AV8 Pro mobo AMD Athlon 64 3000+ Venice cpu (Retail) Mercury 400w psu |
#2
|
|||
|
|||
AV8 Pro Mobo Won't post
If the cpu overheats you'll get a siren alarm. I would check the cpu
and the heat sink installation. Are there any bent or broken pins? Was the socket latched with the cpu not all the way in? Is the heatsink rotated 180 degrees off and therefore not flush with the top of the cpu? Forrest Motherboard Help By HAL web site: http://home.comcast.net/~mobo.help/ On 21 Apr 2006 04:45:10 -0700, "hal1707" wrote: I have built a brand new system with an Abit AV8 pro motherboard and an Athlon 64 3000+ Venice skt 939 and it will not post. I have tried everything including different ram and vga cards etc. also clearing the cmos. There are no other items connected and it still does the same. I get the guru code 9.0 on the motherboard display which is where the bios should take over and then it starts a two tone beeping sound like a siren! I have no way of testing the cpu on another board. Could it be the Bios? HELP!! Abit AV8 Pro mobo AMD Athlon 64 3000+ Venice cpu (Retail) Mercury 400w psu |
#3
|
|||
|
|||
AV8 Pro Mobo Won't post
- HAL9000 wrote: If the cpu overheats you'll get a siren alarm. I would check the cpu and the heat sink installation. Are there any bent or broken pins? Was the socket latched with the cpu not all the way in? Is the heatsink rotated 180 degrees off and therefore not flush with the top of the cpu? Forrest Motherboard Help By HAL web site: http://home.comcast.net/~mobo.help/ Thnx, Yes tried all that, cpu is seated ok and the fan/heatsink are installed correctly with plenty of thermal paste, I've built a few systems with this cpu and no probs this is a first with the AV8 mobo I starting to think it might be the problem. On 21 Apr 2006 04:45:10 -0700, "hal1707" wrote: I have built a brand new system with an Abit AV8 pro motherboard and an Athlon 64 3000+ Venice skt 939 and it will not post. I have tried everything including different ram and vga cards etc. also clearing the cmos. There are no other items connected and it still does the same. I get the guru code 9.0 on the motherboard display which is where the bios should take over and then it starts a two tone beeping sound like a siren! I have no way of testing the cpu on another board. Could it be the Bios? HELP!! Abit AV8 Pro mobo AMD Athlon 64 3000+ Venice cpu (Retail) Mercury 400w psu |
#4
|
|||
|
|||
AV8 Pro Mobo Won't post
"hal1707" wrote in message ups.com... I have built a brand new system with an Abit AV8 pro motherboard and an Athlon 64 3000+ Venice skt 939 and it will not post. I have tried everything including different ram and vga cards etc. also clearing the cmos. There are no other items connected and it still does the same. I get the guru code 9.0 on the motherboard display which is where the bios should take over and then it starts a two tone beeping sound like a siren! I have no way of testing the cpu on another board. Could it be the Bios? HELP!! Abit AV8 Pro mobo AMD Athlon 64 3000+ Venice cpu (Retail) Mercury 400w psu If you have another PSU to hand try that - the AV8 is very picky about voltages, and had issues with some Antec PSU's because of this. |
#5
|
|||
|
|||
AV8 Pro Mobo Won't post
"Simon Sawyer" wrote in message ... "hal1707" wrote in message ups.com... I have built a brand new system with an Abit AV8 pro motherboard and an Athlon 64 3000+ Venice skt 939 and it will not post. I have tried everything including different ram and vga cards etc. also clearing the cmos. There are no other items connected and it still does the same. I get the guru code 9.0 on the motherboard display which is where the bios should take over and then it starts a two tone beeping sound like a siren! I have no way of testing the cpu on another board. Could it be the Bios? HELP!! Abit AV8 Pro mobo AMD Athlon 64 3000+ Venice cpu (Retail) Mercury 400w psu If you have another PSU to hand try that - the AV8 is very picky about voltages, and had issues with some Antec PSU's because of this. Thnx, Will try getting a bigger psu, and give it a go. |
#6
|
|||
|
|||
AV8 Pro Mobo Won't post
"Hal" wrote in message ... "Simon Sawyer" wrote in message ... "hal1707" wrote in message ups.com... I have built a brand new system with an Abit AV8 pro motherboard and an Athlon 64 3000+ Venice skt 939 and it will not post. I have tried everything including different ram and vga cards etc. also clearing the cmos. There are no other items connected and it still does the same. I get the guru code 9.0 on the motherboard display which is where the bios should take over and then it starts a two tone beeping sound like a siren! I have no way of testing the cpu on another board. Could it be the Bios? HELP!! Abit AV8 Pro mobo AMD Athlon 64 3000+ Venice cpu (Retail) Mercury 400w psu If you have another PSU to hand try that - the AV8 is very picky about voltages, and had issues with some Antec PSU's because of this. Thnx, Will try getting a bigger psu, and give it a go. PROBLEM SOLVED!! Got a new mobo locally now running smoothly :} The Abit board is going back! Thanx |
#7
|
|||
|
|||
AV8 Pro Mobo Won't post
I have an AV8 SLI that had the same symptoms (POST code "9.0."). It had
been working fine ever since my original build about 4 yrs ago, then this came up (out of the blue). The MB LEDs lit up fine, as usual and the fan on the CPU (Athlon 64X 3800+) spun up as usual, so I supposed that the problem was not a dead PSU. I removed all my PCI cards (except my PCIe video card) and disconnected my LAN connection, but still no change. I was stumped!! But, next I removed two sticks of my RAM, tried it again, and it booted OK. Then I removed the 2nd pair of sticks, put the 1st pair in the slots that the 2nd pair was using, and it booted OK, again. Then I put the 2nd pair back in the slots where the 1st pair was originally, and, again, it booted OK. Conclusion: What the f_ck ? Guess the mem. sticks wanted a vacation! (Or, maybe there was some 'crud' at one of the RAM-stick connections, that, by way of removing it and re-installing it, the 'crud was cleaned off the connections. How this could happen is a mystery to me, but ... ??? ) Try it; it may work for you, too. -- Bob "hal1707" wrote in message ups.com... I have built a brand new system with an Abit AV8 pro motherboard and an Athlon 64 3000+ Venice skt 939 and it will not post. I have tried everything including different ram and vga cards etc. also clearing the cmos. There are no other items connected and it still does the same. I get the guru code 9.0 on the motherboard display which is where the bios should take over and then it starts a two tone beeping sound like a siren! I have no way of testing the cpu on another board. Could it be the Bios? HELP!! Abit AV8 Pro mobo AMD Athlon 64 3000+ Venice cpu (Retail) Mercury 400w psu |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
new mobo, won't POST with two sticks of RAM | [email protected] | Homebuilt PC's | 2 | November 12th 05 02:38 AM |
a7n8x-e deluxe POST questions | n | Asus Motherboards | 3 | July 18th 05 08:45 PM |
POSTAL LOTTERY: Turn $6 into $60,000 in 90 days, GUARANTEED | Kooke | Storage (alternative) | 0 | April 16th 05 02:40 PM |
Help! P5GD2 Premium won't boot past POST | Roger | Asus Motherboards | 8 | March 1st 05 01:02 PM |
A8N-Sli Deluxe Post Issues Part II | PJ | Asus Motherboards | 8 | February 17th 05 04:29 PM |