If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Newly Built Computer Won't Stay On
|
#23
|
|||
|
|||
Newly Built Computer Won't Stay On
It is true, LED connectors being reversed polarity wouldn't in itself cause this, but wrong connector block wiring, particularly to one of the OEM or (more elaborate new cases with several function circuit boards in front) other cases could conceivably route LED or other logical connections where they shouldn't be. Thus, the safest bet is to unplug all such wiring and turn system on by momentarily shorting the two power-on pins together with a metallic object. Just tried that - didn't work. One thing seems odd to me. Even though I had the speaker wire off, I still heard the one long beep when I switched on the power. |
#24
|
|||
|
|||
Newly Built Computer Won't Stay On
Do you mean something like this?
http://www.xpcgear.com/20to24pinatx.html But check to see if that old PS you found in the basement would have enough watts to power up your board if you had an adapter to fit it 20 to 24. -- Jan Alter or It's a 200 W PSU, but it should be enough to power the board with ease, right? I don't think I even have to hook up the drives to see if this fixes the problem. |
#25
|
|||
|
|||
Newly Built Computer Won't Stay On
CPU - AMD|A64 X2 3800+ AM2 2x512K R
If the PS is decent I would be thinking at minimum of 300 w to power the rig with the processor you have. I'd be dubious that you could make a reliable test even if you had a 20 to 24 pin adapter with a 200 w PS. You wouldn't have to hook up any drives just as long as you have a cpu, RAM, and video card on the mb. Additionally the old PS would have to have a squarish 4 pin cpu plug that fits to the mb. Does it have one? Older ATX PSs don't -- Jan Alter or wrote in message ps.com... Do you mean something like this? http://www.xpcgear.com/20to24pinatx.html But check to see if that old PS you found in the basement would have enough watts to power up your board if you had an adapter to fit it 20 to 24. -- Jan Alter or It's a 200 W PSU, but it should be enough to power the board with ease, right? I don't think I even have to hook up the drives to see if this fixes the problem. |
#26
|
|||
|
|||
Newly Built Computer Won't Stay On
Jan Alter wrote: CPU - AMD|A64 X2 3800+ AM2 2x512K R If the PS is decent I would be thinking at minimum of 300 w to power the rig with the processor you have. I'd be dubious that you could make a reliable test even if you had a 20 to 24 pin adapter with a 200 w PS. You wouldn't have to hook up any drives just as long as you have a cpu, RAM, and video card on the mb. Additionally the old PS would have to have a squarish 4 pin cpu plug that fits to the mb. Does it have one? Older ATX PSs don't -- Jan Alter Actually, after thinking about it for a bit, I'm just going to go out and buy a PSU and try it. If it doesn't solve the problem, I can return it. As you say, I want a reliable test, and dinking around with an old 200 Watt PSU with adaptor doesn't neccessarily give me a good test. I'll post the results of the PSU switch later today. thanks, Jack |
#27
|
|||
|
|||
Newly Built Computer Won't Stay On
wrote: Jan Alter wrote: CPU - AMD|A64 X2 3800+ AM2 2x512K R If the PS is decent I would be thinking at minimum of 300 w to power the rig with the processor you have. I'd be dubious that you could make a reliable test even if you had a 20 to 24 pin adapter with a 200 w PS. You wouldn't have to hook up any drives just as long as you have a cpu, RAM, and video card on the mb. Additionally the old PS would have to have a squarish 4 pin cpu plug that fits to the mb. Does it have one? Older ATX PSs don't -- Jan Alter Actually, after thinking about it for a bit, I'm just going to go out and buy a PSU and try it. If it doesn't solve the problem, I can return it. As you say, I want a reliable test, and dinking around with an old 200 Watt PSU with adaptor doesn't neccessarily give me a good test. I'll post the results of the PSU switch later today. I just put in a new PSU, an Antec SmartPower 2.0 400 Watt, and the same thing happens, except that now I don't hear the beep. Maybe that means the beep was coming from the fan speed monitoring unit on the original PSU? Anyway, any thoughts on what I ought to do next - besides return the PSU I just bought. Jack thanks, Jack |
#28
|
|||
|
|||
Newly Built Computer Won't Stay On
wrote in message ups.com... Robert Heiling wrote: wrote: OSbandito wrote: Robert Heiling wrote: Since nobody else has mentioned it, I'll toss this out. Double-check your wiring job in regard to the power-on and reset buttons and motherboard pins. Your magic 4 second delay is exactly the effect you would get if power-off were being held down. Bob Good answer--hitting the basics first. But you should warn him: if he got his wires crossed, he will have to remove his shorts. Well, I've tried reversing the power on wires, removing the reset wires, I wouldn't be comfortable with what you describe. Why don't you simply remove all connections to those 10 sets of pins -LED, Reset, Speaker, Power - All of them! Then briefly short the Power pins. If the behavior is still the same, then you've ruled those out. removing and replacing the heat sink/fan, and moving the memory to a different slot, and there has been no change. I don't have spare mbs, memory, or PSUs lying around, so I guess I'll go buy a power supply first, and try that. Thanks for the advice, and keep it coming. But if it comes on and stays on, you'll know where to look for one problem. Bob I just located an older 20 pin PSU in my basement, but my mb needs a 24 pin. Is there any way to use this old PSU, just to see if it fixes the problem before I buy a new one? NOOOOOOOOO you cannot skimp on the supply. That supply is most likely a 200w / 300w and is going to fall way short of supplying enough power. |
#29
|
|||
|
|||
Newly Built Computer Won't Stay On
wrote in message ups.com... Jan Alter wrote: CPU - AMD|A64 X2 3800+ AM2 2x512K R If the PS is decent I would be thinking at minimum of 300 w to power the rig with the processor you have. I'd be dubious that you could make a reliable test even if you had a 20 to 24 pin adapter with a 200 w PS. You wouldn't have to hook up any drives just as long as you have a cpu, RAM, and video card on the mb. Additionally the old PS would have to have a squarish 4 pin cpu plug that fits to the mb. Does it have one? Older ATX PSs don't -- Jan Alter Actually, after thinking about it for a bit, I'm just going to go out and buy a PSU and try it. If it doesn't solve the problem, I can return it. As you say, I want a reliable test, and dinking around with an old 200 Watt PSU with adaptor doesn't neccessarily give me a good test. I'll post the results of the PSU switch later today. thanks, VERY good , disregard my other post |
#30
|
|||
|
|||
Newly Built Computer Won't Stay On
wrote in message ups.com... wrote: Jan Alter wrote: CPU - AMD|A64 X2 3800+ AM2 2x512K R If the PS is decent I would be thinking at minimum of 300 w to power the rig with the processor you have. I'd be dubious that you could make a reliable test even if you had a 20 to 24 pin adapter with a 200 w PS. You wouldn't have to hook up any drives just as long as you have a cpu, RAM, and video card on the mb. Additionally the old PS would have to have a squarish 4 pin cpu plug that fits to the mb. Does it have one? Older ATX PSs don't -- Jan Alter Actually, after thinking about it for a bit, I'm just going to go out and buy a PSU and try it. If it doesn't solve the problem, I can return it. As you say, I want a reliable test, and dinking around with an old 200 Watt PSU with adaptor doesn't neccessarily give me a good test. I'll post the results of the PSU switch later today. I just put in a new PSU, an Antec SmartPower 2.0 400 Watt, and the same thing happens, except that now I don't hear the beep. Maybe that means the beep was coming from the fan speed monitoring unit on the original PSU? Anyway, any thoughts on what I ought to do next - besides return the PSU I just bought. Jack thanks, Jack im back to the heatsink and fan assembly. if the sink is on 180 defgrees round there will be a gap between the sink and the cpu. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
If you have recently purchased a custom built computer from............. | trifecta | General | 2 | January 26th 06 02:47 AM |
newly built system with Asus P4R800-V deluxe doesn't boot up | bbbobo | Homebuilt PC's | 1 | October 24th 04 07:05 PM |
How to Fix Your Computer | Ben Dellar | Overclocking AMD Processors | 0 | November 11th 03 09:39 AM |
Questions from one who has never built a computer before | Phil Pease | Homebuilt PC's | 13 | October 28th 03 02:45 PM |
Spontaneous Rebooting on newly built Intel based system | jim | General Hardware | 1 | October 19th 03 11:42 PM |